Advantech IPMI-2000 Installation and operation manual

IPMI-2000 Startup Manual 1

Before you begin installing your card, please make sure that

the following items have been shipped:

1. IPMI-2000 module x 1

2. Startup manual x 1 P/N: 2042200000

3. Warranty Card x 1 P/N: 2190000902

4. VGA cable x 1 P/N: 1700020950-01

5. Post x 3 P/N: 1910003770-01

6. Screw x 6 P/N: 19350304A0

If any of these items are missing or damaged, please con-

tact your distributor or sales representative immediately.

IPMI-2000

IPMI Module, AST2600 Chipset

Startup Manual

General Features

• Outofband(OSindependent)

• Usermanagement

• Remotecontrol

• Systemhealth

• Maintenance

ASMBSupportList

ASMB-587G2-00A1

ASMB-587G4-00A1

Note:For more ASMB support list, please visit our website.

Mechanical and Environmental

• Dimensions:218 mm x 122 mm

• Powersupplytype:5 VSB

• Powerrequirements:5 VSB @ 55mA

• Operatingtemperature:0 ~ 60° C

• Operatinghumidity:60° C @ 85% RH, Non-Condensing

• Storagetemperature:-40 ~ 85° C

• Storagehumidity:60° C @ 95% RH, Non-Condensing

• Weight:20 g

There are three connectors on the module and one of them

is used to connect with ASMB. The below table lists the

functions of these connectors.

Connectors

Label Function

BMC_CN1 IPMI connector

VGA1 VGA1 connector

BMC_SPI1 BMC SPI ROM

Specications

PackingList

For more information on this and other Advantech

products, please visit our website at:

http://www.advantech.com

http://www.advantech.com/eplatform

For technical support and service, please visit our

support website at:

http://support.advantech.com

This manual is for the IPMI-2000 Series.

Part No. 2042200000

Printed in China

1st Edition

August 2021

Connectors

2 IPMI-2000 Startup Manual

1. Please connect IPMI module to the ASMB BMC2

connector using the following steps.

1). Connect BMC2 with the screw holes on your

ASMB. If your ASMB is ASMB-587, you will nd two

screw holes around BMC2.

Figure1: Locations of BMC2 & Screw holes on ASMB

2). Connect BMC_CN1 with screw holes on

IPMI-2000.

BMC_CN1

STDOFF1

STDOFF2STDOFF3

Figure 2: Locations of BMC1 & standos on module

3). Lock the posts onto the screw holes on ASMB,

then connect the ASMB and IPMI-2000 with

BMC_CN1 connector.

Figure 3: Assembling module

BMC2 Screw holes

4). Align the holes and x securely with the

screws.

Figure 4: Fixing the screws

2. After setting up the hardware conguration, users

should also complete the BIOS settings. Please check

the information below to nd out corresponding instruc-

tions to enable the IPMI function.

Enter Server Mgmt, “BMC Support” and “Wait for BMC”

are [Enabled] as default setting.

Figure 5: BMC support setting

Enter BMC network conguration, the default

Conguration Address source is [Unspecied]. Change

Address source to [Static], there is a default IP address

for user settings the rst time.

Figure 6: BMC network conguration setting

Note:At rst time initialing IPMI-2000, it may take up to one

minute before posting BIOS. When F/W is ready, the LED

light of module will be ashing.



InstallationGuide

IPMI-2000 Startup Manual 3

Figure 7: IPMI-2000 Top side Board Layout

Figure 8: IPMI-2000 Bottom side Board Layout

VGA1

STDOFF3

STDOFF2STDOFF1 BMC_SPI1



BoardLayoutandDimensions

BMC_CN1

STDOFF1

STDOFF2STDOFF3

Other Advantech Control Unit manuals

Advantech

Advantech MIC-75G20-10B1 Installation and operation manual

Advantech

Advantech ASMB-BMC Installation and operation manual

Advantech

Advantech B+B SmartWorx iMcV-Giga-MediaLinX TX/SFP User manual

Advantech

Advantech ADAM-3016 User manual

Advantech

Advantech PCM-3612I Installation and operation manual

Advantech

Advantech AIW-357 DK-G2U User manual

Advantech

Advantech DVP-1020 User manual

Advantech

Advantech MIC-3376 User manual

Advantech

Advantech APAX-5202P User manual

Advantech

Advantech Network Device USB-4761 Installation and operation manual

Advantech

Advantech PCM-3665 PC/104-Plus Installation and operation manual

Advantech

Advantech iDAQ-817 User manual

Advantech

Advantech SOM-5899 User manual

Advantech

Advantech WISE-1510 User manual

Advantech

Advantech PCM-3618 User manual

Advantech

Advantech ROM-7510 User manual

Advantech

Advantech ADAM-3750 3-Wire Series Installation and operation manual

Advantech

Advantech USB-4711A User manual

Advantech

Advantech ADAM-5000 Series User manual

Advantech

Advantech AMAX-4800 Series User manual

Advantech

Advantech PCM-3810I Installation and operation manual

Advantech

Advantech PCM-3345 User manual

Advantech

Advantech PCM-3526 Installation and operation manual

Advantech

Advantech IPMI-1000 Installation and operation manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual