Advantech CPC-2520 User manual
CPC-2520
VGA/LCD module for Mini Biscuit PC
User’s Manual
Copyright notice
This document is copyrighted, October 1999. All rights are
reserved. The original manufacturer reserves the right to make
improvements to the products described in this manual at any time
without notice.
No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in
this manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, nor for
any infringements upon the rights of third parties which may result
from its use.
Acknowledgements
AMI is a trademark of American Megatrends, Inc.
Cyrix is a trademark of Cyrix Corporation.
IBM, PC/AT, PS/2 and VGA are trademarks of International
Business Machines Corporation.
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of
Microsoft Corp.
C&T is a trademark of Chips and Technologies, Inc.
All other product names or trademarks are properties of their
respective owners.
Part No. 2006252000
1st Edition Printed in Taiwan October 1999
Product warranty
Advantech warrants to you, the original purchaser, that each of its
products will be free from defects in materials and workmanship
for one year from the date of purchase.
This warranty does not apply to any products that have been
repaired or altered by persons other than repair personnel autho-
rized by Advantech, or which have been subject to misuse, abuse,
accident or improper installation. Advantech assumes no liability
under the terms of this warranty as a consequence of such events.
Because of Advantech high quality-control standards and rigorous
testing, most of our customers never need to use our repair service.
If an Advantech product is defective, it will be repaired or re-
placed at no charge during the warranty period. For out-of-
warranty repairs, you will be billed according to the cost of
replacement materials, service time and freight. Please consult
your dealer for more details. If you think you have a defective
product, follow these steps:
1. Collect all the information about the problem encountered.
(For example, CPU speed, Advantech products used, other
hardware and software used, etc.) Note anything abnormal and
list any on- screen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your
manual, product, and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA
(return merchandize authorization) number from your dealer.
This allows us to process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair
and Replacement Order Card and a photocopy proof of
purchase date (such as your sales receipt) in a shippable
container. A product returned without proof of the purchase
date is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package
and ship it prepaid to your dealer.
Packing list
Before installing your board, make sure that the following materi-
als have been received:
• 1 CPC-2520 VGA/LCD module for mini biscuit PC
• 2 floppy disks (or one CD-ROM) including SVGA utility
programs and drivers for Windows 95/98/NT
• 1 warranty certificate
• This user's manual
If any of these items are missing or damaged, contact your
distributor or sales representative immediately.
Technical support and sales assistance
If you have any technical questions about the CPC-2520 or any
other Advantech products, please visit our support website at:
http://support.advantech.com.tw
For more information about Advantech's products and sales
information, please visit:
http://www.advantech.com
Contents
Chapter 1 General Information.................................1
1.1 Introduction.................................................................. 2
1.2 Specifications ................................................................ 3
General ........................................................................... 3
Mechanical and environmental ...................................... 3
1.3 Board layout: dimensions............................................ 4
Chapter 2 Installation................................................5
2.1 Jumpers and connectors.............................................. 6
2.2 Board layout: jumper/connector locations ................ 7
2.3 Safety precautions ........................................................ 8
2.4 Jumper settings ............................................................ 9
2.5 LCD Panel select (SW1) ............................................ 10
2.6 Display connectors (CN2, CN3) ................................ 10
2.7 LCD display connector (CN2)................................... 11
2.8 VGA display connector (CN3) .................................. 12
2.9 FPC cable installation................................................ 14
Chapter 3 Software Configuration .........................15
3.1 Introduction................................................................ 16
3.2 Connections for five standard LCDs........................ 16
Connections to Sharp LM64183P, LM64P89
(640 x 480 DSTN MONO LCD) ............................... 16
Connections to Toshiba LTM10C042
(640 x 480 TFT color LCD)....................................... 18
Connections to Sharp LM64C142
(640 x 480 DSTN color LCD) ................................... 19
Connections to Toshiba LTM12C275A
(800 x 600 TFT color LCD)....................................... 20
Chapter 4 PCI SVGA Setup.....................................21
4.1 Introduction................................................................ 22
4.1.1 Chipset ................................................................ 22
4.1.2 Display memory.................................................. 22
4.1.3 Display types....................................................... 22
4.2 Installation of SVGA driver...................................... 23
4.2.1 Installation for Windows 3.1 .............................. 24
4.2.2 Installation for Windows 95 ............................... 26
4.2.3 Installation for Windows NT .............................. 29
4.3 Further information................................................... 32
Chapter 5 Board Diagrams .....................................33
5.1 PCB layout: SODIMM/screw hole locations ........... 34
5.2 Board layout: connectors (top view) ........................ 35
5.3 FPC/FFC layout: CN2: 50-pin FPC connector ....... 36
5.4 FPC/FFC cable layout:
CN3: 12-pin FPC connector ...................................... 36
5.5 Height limitations: side view..................................... 37
5.6 Component suppliers ................................................. 37
Tables
Table 2-1: Jumpers and connectors .......................................................... 6
Table 2-2: LCD display connector (CN2)................................................. 11
Table 2-3: VGA display connector (CN3) ................................................ 12
Table 2-4: VGA display connector (CN3) ................................................ 13
Table 3-1: Connections to Sharp LM64183P, LM64P89 ......................... 16
Table 3-2: Connections to PLANAR EL................................................... 17
Table 3-3: Connections to Toshiba LTM10C042..................................... 18
Table 3-4: Connections to Sharp LM64C142 .......................................... 19
Table 3-5: Connections to Toshiba LTM12C275A .................................. 20
Table 5-1: Component suppliers.............................................................. 37
CHAPTER
1
General Information
This chapter provides background
information for the CPC-2520. Sections
include:
•Card specifications
•Board layout
2CPC-2520 User's Manual
1.1 Introduction
The CPC-2520 is an extension VGA/LCD module for the
CPC-2245 mini biscuit PC. The CPC-2520 uses a C&T 69000
chipset for its PCI/SVGA controller. It supports many popular
LCD, EL, and gas plasma flat panel displays and conventional
analog CRT monitors. The 69000 VGA BIOS supports mono-
chrome LCD, EL, color TFT and STN LCD flat panel displays. In
addition, it also supports interlaced and non-interlaced analog
monitors (color and mono-chrome VGA) in high-resolution modes
while maintaining complete IBM VGA compatibility. Digital
monitors (i.e. MDA, CGA, and EGA) are NOT supported.
Multiple frequency (multi-sync) monitors are handled as if they
were analog monitors.
With on-board 2 MB display memory, the VGA controller can
drive CRT displays or color panel displays with resolutions up to
1024 x 768 at 64 K colors.
CRT and panel displays can be used simultaneously. The
CPC-2520 can be set in one of three configurations: on a CRT, on
a flat panel display, or on both simultaneously. The system is
initially set to simultaneous display mode.
Chapter 1 General Information 3
1.2 Specifications
General
•Flat panel VGA interface
•Chipset: C&T 69000 VGA controller with Windows accelerator
•Display memory: 2 MB SDRAM in built-in chip
•Display output:
50-pin FPC connector for flat panel interface
12-pin FPC connector for VGA interface
•Display type: Supports CRT and flat panel (TFT, DSTN, and
mono) displays. Can display both CRT and flat panel simulta-
neously
•Resolution: 640 x 480 @ 16 M colors
800 x 600 @ 16 M colors
1024 x 768 @ 64 K colors
Mechanical and environmental
•Power supply voltage: +5 V (4.75 V ~ 5.25 V)
•Max. power requirements: +5 V @ 0.8 A
•Operating temperature: 0 ~ 60°C (32 ~ 140°F)
•Board size: 68 x 100 mm (2.7" x 3.9")
•Weight: 0.05 kg (0.11 lb)
Table of contents
Other Advantech Computer Hardware manuals
Advantech
Advantech FWA-6510 Installation and operation manual
Advantech
Advantech SOM-5991 User manual
Advantech
Advantech ITA-2230 Series Installation and operation manual
Advantech
Advantech ARK-1551 User manual
Advantech
Advantech AIMB-588 User manual
Advantech
Advantech ARK-1370 User manual
Advantech
Advantech MIO-5375 Installation and operation manual
Advantech
Advantech MIO-5375 User manual
Advantech
Advantech UNO-1251G User manual
Advantech
Advantech SOM-6897 User manual
Advantech
Advantech MIO-5376 Installation and operation manual
Advantech
Advantech ECU-P1528PE Installation and operation manual
Advantech
Advantech AIMC-3422 Installation and operation manual
Advantech
Advantech PCE-7B17-00A1E Installation and operation manual
Advantech
Advantech PCL-734 User manual
Advantech
Advantech PCA-6178VE User manual
Advantech
Advantech MIC-7 Series Installation and operation manual
Advantech
Advantech AIMB-723 User manual
Advantech
Advantech USB-4750 User manual
Advantech
Advantech PCE-5B12-07 Installation and operation manual
Popular Computer Hardware manuals by other brands
EMC2
EMC2 VNX Series Hardware Information Guide
Panasonic
Panasonic DV0PM20105 Operation manual
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 user manual
Gigabyte
Gigabyte B660M DS3H AX DDR4 user manual
Raidon
Raidon iT2300 Quick installation guide
National Instruments
National Instruments PXI-8186 user manual
