ADTRAN Smart 16e Shelf User manual

Smart 16e Shelf

User Manual

4202023L5 Smart 16e, 2nd Gen, AC Version

4202023L6 Smart 16e, 2nd Gen, Dual AC Version

4202023L7 Smart 16e, 2nd Gen, DC Version

4202023L8 Smart 16e, 2nd Gen, Dual DC Version

64202023L5-1B

July 2004

Trademarks

Any brand names and product names included in this manual are trademarks, registered trademarks, or

trade names of their respective holders.

To the Holder of the Manual

The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change

the contents without prior notice.

In no event will ADTRAN be liable for any special, incidental, or consequential damages or for

commercial losses even if ADTRAN has been advised thereof as a result of issue of this publication.

About this Manual

This manual provides a complete description of the Smart 16e Shelf system and system software. The

purpose of this manual is to provide the technician, system administrator, and manager with general and

specific information related to the planning, installation, operation, and maintenance of the Smart 16e

Shelf. This manual is arranged so that needed information can be found quickly and easily.

901 Explorer Boulevard

P.O. Box 140000

Huntsville, AL 35814-4000

Phone: (256) 963-8000

Printed in U.S.A.

Smart 16e Shelf User Manual

Conventions

Notes provide additional useful information.

Cautions signify information that could prevent service interruption.

Warnings provide information that could prevent damage to the equipment or

endangerment to human life.

Smart 16e Shelf User Manual

IMPORTANT SAFETY INFORMATION

When using your telephone equipment, please follow these basic safety precautions to reduce the risk of

fire, electrical shock, or personal injury:

1. Do not use this product near water, such as near a bath tub, wash bowl, kitchen sink, laundry tub,

in a wet basement, or near a swimming pool.

2. Avoid using a telephone (other than a cordless-type) during an electrical storm. There is a remote

risk of shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

4. Use only the power cord, power supply, and/or batteries indicated in the manual. Do not dispose of

batteries in a fire. They may explode. Check with local codes for special disposal instructions.

SAVE THESE INSTRUCTIONS

Smart 16e Shelf User Manual

Affidavit Requirements for Connection to Digital Services

• An affidavit is required to be given to the telephone company whenever digital terminal equipment

without encoded analog content and billing protection is used to transmit digital signals containing

encoded analog content which are intended for eventual conversion into voice band analog signal and

transmitted on the network.

• The affidavit shall affirm that either no encoded analog content or billing information is being trans-

mitted or that the output of the device meets Part 68 encoded analog content or billing protection spec-

ification.

• The end user/customer will be responsible for filing an affidavit with the local exchange carrier when

connecting unprotected CPE to a 1.544 Mbps or subrate digital service.

• Until such time as subrate digital terminal equipment is registered for voice applications, the affidavit

requirements for subrate services are waived.

Smart 16e Shelf User Manual

Affidavit for Connection of Customer Premises Equipment to 1.544 MBPS and/or Subrate Digital

Services

For the work to be performed in the certified territory of ______________ (telco name)

State of ________________________________

County of ______________________________

I, _______________________ (name), ____________________ (business address),

_____________________ (telephone number) being duly sworn, state:

I have the responsibility for the operation and maintenance of the terminal equipment to be connected to

1.544 Mbps and/or __________________ subratedigital services. The terminal equipment to be connected

complies with Part 68 of the FCC rules except for the encoded analog content and billing protection

specification. With respect to encoded analog content and billing protection:

( ) I attest that all operations associated with the establishment, maintenance and adjustment of the digital

CPE with respect to encoded analog content and billing protection information continuously complies with

Part 68 of the FCC rules and Regulations.

( ) The digital CPE does not transmit digital signals containing encoded analog content or billing

information which is intended to be decoded within the telecommunications network.

( ) The encoded analog content and billing protection is factory set and is not under the control of the

customer.

I attest that the operator(s) maintainer(s) of the digital CPE responsible for the establishment, maintenance

and adjustment of the encoded analog content and billing information has (have) been trained to perform

these functions by successfully having completed one of the following (check appropriate blocks):

( ) A. A training course provided by the manufacturer/grantee of the equipment used to encode analog

signals; or

( ) B. A training course provided by the customer or authorized representative, using training materials and

instructions provided by the manufacturer/grantee of the equipment used to encode analog signals; or

( ) C. An independent training course (e.g., trade school or technical institution) recognized by the

manufacturer/grantee of the equipment used to encode analog signals; or

Smart 16e Shelf User Manual

( ) D. In lieu of the proceeding training requirements, the operator(s)/maintainer(S) is (are) under the

control of a supervisor trained in accordance with _______________ (circle one) above.

I agree to provide ____________________ (telco’s name) with proper documentation to demonstrate

compliance with the information in the preceding paragraph, if so requested.

_____________________ Signature

_____________________ Title

_____________________ Date

Subscribed and sworn to before me

This _________ day of ___________________, 20__

_______________________________________

Notary Public

My commission expires: _________________________

Smart 16e Shelf User Manual

FCC regulations require that the following information be provided in this manual:

1. This equipment complies with Part 68 of the FCC rules. There is a label on the equipment that

shows the FCC registration number and Ringer Equivalence Number (REN) for this equipment, if

applicable. If required, this information must be given to the telephone company.

2. The following information may be required when applying to the local telephone company for

leased line facilities.

3. An FCC compliant telephone cord with a modular plug may be provided with this equipment. This

equipment is designed to be connected to the telephone network or premises wiring using a com-

patible modular jack, which is FCC Part 68 compliant. See installation instructions for details.

4. If this equipment causes harm to the telephone network, the telephone company may temporarily

discontinue service. If possible, advance notification is given; otherwise, notification is given as

soon as possible. The telephone company will advise the customer of the right to file a complaint

with the FCC.

5. The telephone company may make changes in its facilities, equipment, operations, or procedures

that could affect the proper operation of this equipment. If this happens, the telephone company

will provide advance notification and the opportunity to make the necessary modifications to

maintain uninterrupted service.

6. If experiencing difficulty with this equipment, please contact ADTRAN for repair and warranty

information. If the equipment is causing harm to the network, the telephone company may request

this equipment to be disconnected from the network until the problem is resolved or it is certain

that the equipment is not malfunctioning.

7. This unit contains no user serviceable parts.

8. The FCC recommends that the AC outlet to which equipment requiring AC power is to be installed

is provided with an AC surge arrester.

Service

Type Digital Facility

Interface Code Service Order

Code Network

Jacks

2.4 kbps Digital Interface

4.8 kbps Digital Interface

9.6 kbps Digital Interface

19.2 kbps Digital Interface

38.4 kbps Digital Interface

56 kbps Digital Interface

64 kbps Digital Interface

04DU5-24

04DU5-48

04DU5-96

04DU5-19

04DU5-38

04DU5-56

04DU5-64

6.0F

RJ-48S

Basic Rate ISDN 02IS5 6.0N RJ-49C

1.544 Mbps-SF

1.544 Mbps-SF and B8ZS

1.544 Mbps-ESF

1.544 Mbps-ESF and B8ZS

04DU9-BN

04DU9-DN

04DU9-1KN

04DU9-1SN

6.0F

RJ-48C

Smart 16e Shelf User Manual

Federal Communications Commission Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio frequencies. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

Changes or modifications to this unit not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

Shielded cables must be used with this unit to ensure compliance with Class A FCC

limits.

Smart 16e Shelf User Manual

Industry Canada Compliance Information

Notice: The Industry Canada label applied to the product (identified by the Industry Canada logo or the

“IC:” in front of the certification/registration number) signifies that the Industry Canada technical

specifications were met.

Notice: The Ringer Equivalence Number (REN) for this terminal equipment is supplied in the

documentation or on the product labeling/markings. The REN assigned to each terminal device indicates

the maximum number of terminals that can be connected to a telephone interface. The termination on an

interface may consist of any combination of devices subject only to the requirement that the sum of the

RENs of all the devices should not exceed five (5).

Canadian Emissions Requirements

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus

as set out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the

Department of Communications.

Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques

de Class A prescrites dans la norme sur le materiel brouilleur: “Appareils Numeriques,” NMB-003 edictee

par le ministre des Communications.

This manual suits for next models

Table of contents

Other ADTRAN Network Hardware manuals

ADTRAN

ADTRAN NetVantaE1/FE1 User manual

ADTRAN

ADTRAN DE-4E Instruction Manual

ADTRAN

ADTRAN SHDSL V.35 LTU User manual

ADTRAN

ADTRAN IQ 310 User manual

ADTRAN

ADTRAN Total Reach TRDDB Instruction Manual

ADTRAN

ADTRAN GPON 452 User manual

ADTRAN

ADTRAN 1200312L5 User manual

ADTRAN

ADTRAN NetVanta Series User manual

ADTRAN

ADTRAN TSU LT User manual

ADTRAN

ADTRAN NetVanta Analog Modem Dial Backup Interface... User manual

ADTRAN

ADTRAN NetVanta 2000 Series User guide

ADTRAN

ADTRAN NT1 ACE User manual

ADTRAN

ADTRAN ISU 512 User manual

ADTRAN

ADTRAN NetVanta 1700801G1 User manual

ADTRAN

ADTRAN TRACER 4305 User manual

ADTRAN

ADTRAN 401 1 GE Micro ONT User manual

ADTRAN

ADTRAN 1442823F1 User manual

ADTRAN

ADTRAN TSU 100 User manual

ADTRAN

ADTRAN Total Access 1100F User manual

ADTRAN

ADTRAN U-BR1TE User manual

ADTRAN

ADTRAN 3192 User manual

ADTRAN

ADTRAN 1200864L1 User manual

ADTRAN

ADTRAN 1202295L1 User manual

ADTRAN

ADTRAN Express 3100 User manual

Popular Network Hardware manuals by other brands

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL product manual

B&B Electronics

B&B Electronics ZXT9-IO-222R2 product manual

Yudor

Yudor YDS-16 user manual

D-Link

D-Link ShareCenter DNS-320L datasheet

Samsung

Samsung ES1642dc Hardware user manual

Honeywell Home

Honeywell Home LTEM-PV Installation and setup guide

evertz

evertz 7700 Series manual

D-Link

D-Link ShareCenter DNS-343 Quick installation guide

Asante

Asante AsanteBridge 1012 user guide

FireBrick

FireBrick FB2700 user manual

Audiovox Electronics

Audiovox Electronics ARWH2T user manual

ADC

ADC DSX-1 Operational Procedures Guide

NetComm

NetComm NF2 user guide

Alcatel-Lucent

Alcatel-Lucent 5620 user guide

Dell EMC

Dell EMC XC6420 Series Solution guide

Lanner

Lanner NCA-1020A user manual

Allied Telesis

Allied Telesis AT-TN121-A Specifications

Arista

Arista CCA-ETM-Q12 quick start guide