ADTRAN NetVanta E1/FE1 + G.703 Network Interface... User manual

NETVANTA E1 W/ G.703 DROP NETWORK INTERFACE MODULE (NIM) P/N 1200878L1

For more detailed documentation, visit us online at www.adtran.com

Quick Start Guide

SPECIFICATIONS

E1/FE1

Interface

Line Rate: 2.048 Mbps +/- 50 PPM

Line Code: AMI or HDB3

Framing: FAS with optional CRC-4

FE1 Line Rate: Timeslot, channelized

(in multiples of 64 kbps)

Receiver Sensitivity: -30 dB

Connector: RJ-48C

G.703

Interface

Line Interface: Per ITU-T G.703

Receiver Sensitivity:-30 dB

Line Rate: 2.048 Mbps, +/- 50 PPM

Capacity: 1 to 31 timeslots

If timeslot 16 signaling is used on the drop port, a

maximum of 15 timeslots can be mapped to router

(1-15 or 17-31).

Line Code: AMI or HDB3

Framing: FAS with Optional CRC-4

Connector: RJ-48C

Clock Source Network, internal, and through

Diagnostics Test pattern generation and detection

(QRSS, 511)

Network loopbacks

Alarm generation and detection

Network performance data (15 minutes and 24 hours)

WAN-E1 G.703 DBU

INSTALLATION INSTRUCTIONS

1. Remove power from the unit.

2. Slide the Network Interface Module (NIM) into the

option slot until the NIM is firmly seated against the

front of the chassis.

3. Secure the pins at both edges of the NIM.

4. Connect the cables to the associated device(s).

5. Complete the installation of the base unit.

6. Restore power to the unit.

WAN-E1 NETWORK (RJ-48C) CONNECTION PINOUT

Pin Name Description

1 R1 Receive data from the network

2 T1 Receive data from the network

3 — Unused

4 R Transmit data toward the network

5 T Transmit data toward the network

6-8 — Unused

G.703 (RJ-48C) CONNECTION PINOUT

Pin Name Description

1 R Transmit data toward the DTE

2 T Transmit data toward the DTE

3 — Unused

4 R1 Receive data from the DTE

5 T1 Receive data from the DTE

6-8 — Unused

NETVANTA E1 W/ G.703 DROP NETWORK INTERFACE MODULE (NIM) P/N 1200878L1

For more detailed documentation, visit us online at www.adtran.com

Quick Start Guide

DBU (RJ-48C) CONNECTION PINOUT

Pin Name Description

1-2 — Unused

3 R1 Network-Ring1

4 R Network-Ring

5 T Network-Tip

6T1Network-Tip1

7-8 — Unused

An optional Dial Backup Interface Module (DIM) is

required for dial backup applications.

E1/FE1 + G.703 NIM COMMANDS

clock source {line* | internal | through}

Configures the source timing used for the interface.

line* Recovers clock from the E1 circuit.

internal Provides clocking using the internal oscillator.

through Recovers clock from the circuit connected

to the G.703 interface.

coding {ami | hdb3}

Configures the line coding for the E1 or G.703 physical interface. This setting must

match the line coding supplied on the circuit by the service provider.

ami Alternate mark inversion

hdb3* High-density bipolar 3

description <text>

Comment line to provide an identifier for this interface (for example, circuit ID, contact

information, etc.).

framing {crc4}

Configures the framing format of the E1 interface.

crc4 CRC4 framing enabled

loopback network {line | payload}

Initiates a loopback on the interface toward the network. Deactivate using the

no loopback network command.

line Initiates a metallic loopback of the physical E1 network

interface.

payload Initiates a loopback of the E1 framer (CSU portion) of the

E1 network interface.

shutdown

Turns off the interface. The no version of this command turns the interface on and

allows it to pass data.

snmp trap {line-status | link-status}

Enables the unit interface to send SNMP traps when there is an interface status change.

tdm-group <group#> timeslots <1-24> speed [56 | 64]

Creates a group of contiguous DS0s on this interface to be used during the

cross-connect process.

<group#> Number label to identify this TDM group

<DS0 range> DS0s in this group in the form: <starting DS0 - ending

DS0>

test pattern {ones | zeros}

Initiates sending the specified test pattern.

ones Generate continuous ones

zeros Generate continuous zeros

test-pattern clear

Clears the test pattern error count.

test-pattern insert

Inserts an error into currently active test pattern.

* Indicates default values.

Table of contents

Other ADTRAN Network Hardware manuals

ADTRAN

ADTRAN Total Access 3000 User guide

ADTRAN

ADTRAN eSBC User manual

ADTRAN

ADTRAN 500 Series User manual

ADTRAN

ADTRAN HDSL4 User manual

ADTRAN

ADTRAN BR1/10 PAU Instruction Manual

ADTRAN

ADTRAN NetVanta 5660 User manual

ADTRAN

ADTRAN DSU IV ESP User manual

ADTRAN

ADTRAN Total Access 300 Series User manual

ADTRAN

ADTRAN NIU3 Instruction Manual

ADTRAN

ADTRAN DDM+ HTU-C M User manual

ADTRAN

ADTRAN 602 User manual

ADTRAN

ADTRAN DSU/CSU Product manual

ADTRAN

ADTRAN Dual T1/PRI User manual

ADTRAN

ADTRAN ATLAS 550 User manual

ADTRAN

ADTRAN Network Interface Module T1/FT1 User manual

ADTRAN

ADTRAN TSU 100 User manual

ADTRAN

ADTRAN 1442890G2 User manual

ADTRAN

ADTRAN NETVANTA OCTAL POE User manual

ADTRAN

ADTRAN NetVanta T1/FT1 + DSX-1 User manual

ADTRAN

ADTRAN Total Access 900 Series User manual

ADTRAN

ADTRAN DE-4E Instruction Manual

ADTRAN

ADTRAN 1442940G1 User manual

ADTRAN

ADTRAN NetVanta Series User manual

ADTRAN

ADTRAN Total Access 604 User guide

Popular Network Hardware manuals by other brands

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL product manual

B&B Electronics

B&B Electronics ZXT9-IO-222R2 product manual

Yudor

Yudor YDS-16 user manual

D-Link

D-Link ShareCenter DNS-320L datasheet

Samsung

Samsung ES1642dc Hardware user manual

Honeywell Home

Honeywell Home LTEM-PV Installation and setup guide

evertz

evertz 7700 Series manual

D-Link

D-Link ShareCenter DNS-343 Quick installation guide

Asante

Asante AsanteBridge 1012 user guide

FireBrick

FireBrick FB2700 user manual

Audiovox Electronics

Audiovox Electronics ARWH2T user manual

ADC

ADC DSX-1 Operational Procedures Guide

NetComm

NetComm NF2 user guide

Alcatel-Lucent

Alcatel-Lucent 5620 user guide

Dell EMC

Dell EMC XC6420 Series Solution guide

Lanner

Lanner NCA-1020A user manual

Allied Telesis

Allied Telesis AT-TN121-A Specifications

Arista

Arista CCA-ETM-Q12 quick start guide