ADTRAN DSX 1 User manual

Other manuals for DSX 1

1

This manual suits for next models

1

Table of contents

Other ADTRAN Network Hardware manuals

ADTRAN

ADTRAN 12804108L1A User guide

ADTRAN

ADTRAN NetVanta T1/FT1 + DSX-1 User manual

ADTRAN

ADTRAN DDM+ H2TU-C Instruction Manual

ADTRAN

ADTRAN NetVanta 1335 Series User manual

ADTRAN

ADTRAN NT1 ACE User manual

ADTRAN

ADTRAN SFP+ User manual

ADTRAN

ADTRAN Dual Nx56/64 User manual

ADTRAN

ADTRAN Cable T1 ESF CSU ACE User manual

ADTRAN

ADTRAN Dial Backup Interface Module 1204006L2 User manual

ADTRAN

ADTRAN 1442120G1 User manual

ADTRAN

ADTRAN 1202801L1 User manual

ADTRAN

ADTRAN 1203019L2 User manual

ADTRAN

ADTRAN P/N 1204011L1 Service manual

ADTRAN

ADTRAN 1200184L1 User manual

ADTRAN

ADTRAN TSU LT User manual

ADTRAN

ADTRAN NetVanta Series User manual

ADTRAN

ADTRAN ACT 1900 User manual

ADTRAN

ADTRAN DS3 NIU3 User manual

ADTRAN

ADTRAN 424 ONT User manual

ADTRAN

ADTRAN NetVanta 1700801G1 User manual

ADTRAN

ADTRAN 1442980G1C User manual

ADTRAN

ADTRAN Total Access 832 User manual

ADTRAN

ADTRAN TSU ACE Service manual

ADTRAN

ADTRAN Total Access 544R User manual

Popular Network Hardware manuals by other brands

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL product manual

B&B Electronics

B&B Electronics ZXT9-IO-222R2 product manual

Yudor

Yudor YDS-16 user manual

D-Link

D-Link ShareCenter DNS-320L datasheet

Samsung

Samsung ES1642dc Hardware user manual

Honeywell Home

Honeywell Home LTEM-PV Installation and setup guide

evertz

evertz 7700 Series manual

D-Link

D-Link ShareCenter DNS-343 Quick installation guide

Asante

Asante AsanteBridge 1012 user guide

FireBrick

FireBrick FB2700 user manual

Audiovox Electronics

Audiovox Electronics ARWH2T user manual

ADC

ADC DSX-1 Operational Procedures Guide

NetComm

NetComm NF2 user guide

Alcatel-Lucent

Alcatel-Lucent 5620 user guide

Dell EMC

Dell EMC XC6420 Series Solution guide

Lanner

Lanner NCA-1020A user manual

Allied Telesis

Allied Telesis AT-TN121-A Specifications

Arista

Arista CCA-ETM-Q12 quick start guide

Technical Support 1-888-4ADTRAN (1-888-423-8726)

Configuring the

Total Access 900 Series

DSX-1 Interface

Quick Configuration Guide 61210916L1-42.4B March 2006

The DSX-1 interface is located on the rear of the Total Access 900 Series products. It is labeled

DSX-1 T1 0/1 on the ADSL units and DSX-1 T1 0/2 on all other units. The DSX-1 interface allows

DS0s to be provided to customer’s voice terminating equipment such as a PBX.

1. Start a VT100 terminal session to connect to your unit. If you need assistance, follow the

steps in the Total Access 900 Series Quick Configuration Guide (P/N 61210916L1-42.1).

2. Enter enable at the initial command prompt to access the Enable mode’s priviledged

commands.

3. Enter configure terminal to access the Global Configuration mode.

4. At the (config)# prompt, enter interface t1 0/x to access the interface configuration mode for

the DSX-1 interface.

5. Enter description 12 Network to PBX to provide a text description of the channels provided

to the DSX-1 interface.

6. Enter tdm-group 2 timeslots 1-12 to create a TDM group of timeslots 1 through 12 on the

DSX-1 interface (t1 0/x).

7. Enter no shutdown to activate the interface.

8. Enter exit to return to the Global Configuration mode.

Please note that these examples are given for your study and consideration only.

They are to help you reach a better understanding of the fundamental concepts

before configuring your application. It will be necessary for you to modify these

examples to match your network configuration. Please replace all underlined entries

(example) with your specific parameters.

Please refer to the ADTRAN Operating System (AOS) Command Reference

Guide on your ADTRAN OS Documentation CD for detailed information on

individual commands and subcommands pertaining to the Total Access 900 Series

products.

DSX-1 Interface

Configuring the DSX-1 Interface

The following steps demonstrate configuring the DSX-1 connection. In the following steps,

please substitute 1(ADSL units) or 2(all other units) for xin t1 0/x.

2 Technical Support 1-888-4ADTRAN (1-888-423-8726) 61210916L1-42.4B

9. Enter clock source internal to set the system clock source to internal timing.

10. Enter voice trunk T03 type t1-rbs supervision wink role network to create and set up this

trunk group for use with T1-RBS (DSX-1) interface.

11. Enter connect t1 0/x tdm-group 2 to allow the physical DSX-1 interface (t1 0/x) to pass the

tdm group to the end device.

12. Enter vad to enable Voice Activity Detection (VAD). VAD detects silence during a call to

reduce the bandwidth a call uses when voice packets are not being transmitting.

13. Enter end to exit the Global Configuration mode.

14. At the #prompt, enter copy running-config startup-config to save the running

configuration to the start-up configuration. The configuration must be saved to the unit’s

nonvolatile random access memory (NVRAM) to prevent the loss of configuration during a

power cycle.