Addi-Data MSX-E1701 User manual
DIN EN ISO 9001:2000
certified
A
DDI-DATA GmbH
Dieselstraße 3
D-77833 OTTERSWEIER
Technical support:
+49 (0)7223 / 9493 – 0
Technical description
MSX-E1701
Intelligent Ethernet
counter/digital I/O module
- Digital I/O -
Edition: 01.02 – 04/2007
Product information
This manual contains the technical installation and important instructions for correct commissioning
and usage, as well as production information according to the current status before printing.
The content of this manual and the technical product data may be changed without prior notice.
ADDI-DATA GmbH reserves the right to make changes to the technical data and the materials
included herein.
Warranty and liability
The user is not permitted to make changes to the product beyond the intended use, or to interfere with
the product in any other way.
ADDI-DATA shall not be liable for obvious printing and phrasing errors. In addition, ADDI DATA, if
legally permissible, shall not be liable for personal injury or damage to materials caused by improper
installation and/or commissioning of the board by the user or improper use, for example, if the board is
operated despite faulty safety and protection devices, or if notes in the operating instructions regarding
transport, storage, installation, commissioning, operation, thresholds, etc. are not taken into
consideration. Liability is further excluded if the operator changes the board or the source code files
without authorisation and/or if the operator is guilty of not monitoring the permanent operational
capability of working parts and this has led to damage.
Copyright
This manual, which is intended for the operator and its staff only, is protected by copyright.
Duplication of the information contained in the operating instructions and of any other product
information, or disclosure of this information for use by third parties, is not permitted, unless this right
has been granted by the product licence issued. Non-compliance with this could lead to civil and
criminal proceedings.
ADDI-DATA software product licence
Please read this licence carefully before using the standard software. The customer is only granted the
right to use this software if he/she agrees with the conditions of this licence.
The software must only be used to set up the ADDI-DATA boards.
Reproduction of the software is forbidden (except for back-up and for exchange of faulty data
carriers). Disassembly, decompilation, decryption and reverse engineering of the software are
forbidden. This licence and the software may be transferred to a third party if this party has acquired a
board by purchase, has agreed to all the conditions in this licence contract and the original owner does
not keep any copies of the software.
Trademarks
ADDI-DATA is a registered trademark of ADDI-DATA GmbH.
Turbo Pascal, Delphi, Borland C, Borland C++ are registered trademarks of Borland Insight Company.
Microsoft C, Visual C++, Windows XP, 98, Windows 2000, Windows 95, Windows NT,
EmbeddedNT and MS DOS are registered trademarks of Microsoft Corporation.
LabVIEW, LabWindows/CVI, DasyLab, Diadem are registered trademarks of National Instruments
Corp.
CompactPCI is a registered trademark of PCI Industrial Computer Manufacturers Group.
VxWorks is a registered trademark of Wind River Systems Inc.
WARNING
The following risks result from improper implementation
and from use of the product contrary to the regulations:
♦Personal injury
♦Damage to the I/0 module, PC and
peripherals
♦Pollution of the environment
♦Protect yourself, the others and the environment!
♦Read carefully the safety precautions
(yellow leaflet).
If this leaflet is not with the documentation, please contact us
and ask for it.
♦Observe the instructions of the manual.
Make sure that you do not forget or skip any step. We are not
liable for damages resulting from a wrong use of the product.
♦Used symbols:
iIMPORTANT!
designates hints and other useful information.
WARNING!
It designates a possibly dangerous situation.
If the instructions are ignored the module, PC and/or peripheral may
be destroyed.
3
Contents MSX-E1701: Digital I/O
1DEFINITION OF APPLICATION ...............................7
1.1 Intended use ....................................................................7
1.2 Usage restrictions.............................................................7
1.3 General description of the board ....................................7
Characteristics...................................................................... 7
1.4 Safety precautions ...........................................................7
1.4.1 Current sources......................................................................7
1.4.2 Degrees of protection............................................................7
1.4.3 Cables...................................................................................8
1.4.4 Housing..................................................................................8
1.4.5 Connection............................................................................8
1.4.6 Remarks.................................................................................8
2USER....................................................................9
2.1 Qualification ....................................................................9
2.2 Personal protection..........................................................9
3HANDLING OF THE ETHERNET I/O MODULE...........10
4TECHNICAL DATA ...............................................11
4.1 Electromagnetic compatibility (EMC) ............................11
4.2 Physical set-up...............................................................11
Dimensions ......................................................................... 11
4.3 Limit values.....................................................................12
4.3.1 Ethernet............................................................................... 12
4.3.2 Trigger input ........................................................................ 13
4.3.3 Synchro inputs and outputs................................................. 13
4.3.4 Digital inputs........................................................................ 13
4.3.5 Digital outputs..................................................................... 14
5USE....................................................................15
5.1 Before use ......................................................................15
5.1.1 Mounting the Ethernet I/O module: DIN rail......................... 15
5.1.2 Mounting the Ethernet I/O module: Angle mounting.......... 16
5.2 Connecting the components .........................................18
5.2.1 Connecting the digital functions......................................... 18
5.2.2 Connecting Ethernet ports.................................................. 19
5.2.3 Connecting trigger and synchro signals ............................. 19
5.2.4 Connecting to the current supply....................................... 20
5.3 Connecting several Ethernet I/O modules .....................20
4
Contents MSX-E1701: Digital I/O
5.3.1 LED display ..........................................................................22
5.3.2 LED “Status”..........................................................................23
6CONNECTING THE PERIPHERAL...........................25
6.1 Pin assignment control signals......................................25
6.1.1 Ethernet Ports.......................................................................25
6.1.2 Trigger/sync..........................................................................26
6.1.3 Current supply .....................................................................26
6.2 Signals of the counter and digital functions..................27
7SOFTWARE .........................................................28
7.1 Option 1: Direct access .................................................28
7.1.1 Interface to the module......................................................28
7.1.2 SOAP: General definition .....................................................28
7.1.3 SOAP functions ....................................................................29
7.1.4 Data server and data protocol............................................29
7.2 Option 2: Access with ADDIPACK ...................................30
7.2.1 Module registration..............................................................30
a) Assigning the IP address..................................................30
b) Module registration..........................................................30
Inserting the module............................................................30
Description of the ADDIREG program..................................34
7.2.2 Questions and software downloads on the web .................35
7.2.3 Standard software ...............................................................37
a) Software functions...........................................................37
b) Software samples............................................................39
7.3 Webserver ......................................................................40
7.4 Software tool SETMSXExxxx.............................................41
8FUNCTIONS OF THE MODULE..............................45
8.1 Block diagram................................................................45
8.2 Connection examples: Digital I/O..................................45
8.2.1 Connection example: Digital inputs (24 V)..........................45
8.2.2 Connection example: Digital outputs (24 V)........................46
8.3 Function description: Digital outputs and diagnostics..46
8.4 Watchdog.......................................................................47
9APPENDIX ..........................................................48
9.1 Glossary .........................................................................48
9.2 Index ..............................................................................50
5
Definition of Application MSX-E1701: Digital I/O
Figures
Fig. 3-1: Correct handling................................................................ 10
Fig. 4-1: Dimensions ........................................................................ 11
Fig. 4-2: MSX-E1701: View from above............................................ 12
Fig. 5-1: Use..................................................................................... 15
Fig. 5-2: Clamps.............................................................................. 16
Fig. 5-3: Angles pointing to the outside ........................................... 16
Fig. 5-4: Angles pointing to the inside ................................................ 16
Fig. 5-5: Screws and seals ............................................................... 17
Fig. 5-6: Angle mounting................................................................. 17
Fig. 5-7: Selecting a digital plug...................................................... 18
Fig. 5-8: Connecting Ethernet ports................................................. 19
Fig. 5-9: Connecting trigger and synchro signals ............................ 19
Fig. 5-10: Connecting the current supply........................................ 20
Fig. 5-11: Connecting several Ethernet I/O modules....................... 21
Fig. 5-12: LEDs: Current supply, Ethernet and Status........................ 22
Fig. 5-13: LEDs: Digital I/O................................................................ 22
Fig. 6-1: Control signals MSX-E1701................................................. 25
Fig. 7-1: SOAP in the TCP/IP protocol staple..................................... 28
Fig. 7-2: Board type list .................................................................... 31
Fig. 7-3: Settings .............................................................................. 31
Fig. 7-4: Settings OK......................................................................... 32
Fig. 7-5: Settings not OK................................................................... 32
Fig. 7-6: ADDIREG main window (example)..................................... 33
Fig. 7-7: ADDevice Manager........................................................... 33
Fig. 7-8: Board clear/insert............................................................... 35
Fig. 7-9: SET MSX-Exxx: Main menu .................................................. 41
Fig. 7-10: New IP address changed ................................................ 44
Fig. 8-1: Block diagram ................................................................... 45
Fig. 8-2: Connection example: Digital inputs (24 V) ........................ 45
Fig. 8-3: Connection example: Digital outputs (24 V)...................... 46
Tables
Table 5-1: LED “Status”.................................................................... 23
Table 6-1: Pin assignment: Ethernet Port 0 and Port 1..................... 25
Table 6-2: Pin assignment: Trigger/Synchro..................................... 26
Table 6-3: Pin assignment: Current supply...................................... 26
Table 6-4: Pin assignment of the digital I/O .................................... 27
Table 7-1: Supported software functions ......................................... 37
Table 7-2: Supported software samples for the Ethernet I/O module
MSX-E1701...................................................................... 39
Table 7-3: Webserver: Further points................................................ 40
6
MSX-E1701: Digital I/O Definition of Application
1DEFINITION OF APPLICATION
1.1 Intended use
The Ethernet I/O module MSX-E1701 with digital and counter functions is
intended for the connection to a network, which is used as electrical equipment for
measurement, control and laboratory pursuant to the norm IEC 61010-1.
1.2 Usage restrictions
The Ethernet I/O module MSX-E1701 must not to be used as safety related part
for securing emergency stop functions.
The Ethernet I/O module MSX-E1701 must not be used in potentially explosive
atmospheres.
1.3 General description of the board
Characteristics
The Ethernet I/O module MSX-E1701 can be used for the acquisition of
incremental counter inputs and the processing of digital signals via 16 digital
inputs/outputs.
1.4 Safety precautions
1.4.1 Current sources
All connected devices must be supplied from current sources that comply with
SELV according to IEC 60950 or EN 60950; or PELV according to IEC 60204-1
or EN 60204-1.
1.4.2 Degrees of protection
iIMPORTANT!
The protection according to the defined degree of protection is
only given if the openings are protected with adequate
protection caps or connectors.
If you are not sure, please contact us:
Phone: +49 (0)7223/94 93-0
7
Definition of Application MSX-E1701: Digital I/O
1.4.3 Cables
The cables must be installed safely against mechanical load.
1.4.4 Housing
The housing may not be opened. It may be opened only by persons who are
authorized by ADDI-DATA.
1.4.5 Connection
Please find information about cables and further accessories in a separate PDF file
“Accessories table”
1.4.6 Remarks
The use of the Ethernet I/O module according to its intended purpose includes
observing all advices given in this manual and in the safety leaflet.
Uses beyond these specifications are not allowed. The manufacturer is not liable
for any damages which would result from the non-observance of this clause.
Make sure that the Ethernet I/O module remains in its protective pack until it is
used.
Do not remove or alter the identification numbers of the Ethernet I/O module.
If you do, the guarantee expires.
8
MSX-E1701: Digital I/O User
2USER
2.1 Qualification
Only persons trained in electronics are entitled to perform the following works:
- installation
- use
- maintenance
2.2 Personal protection
Consider the country-specific regulations about:
- the prevention of accidents
- electrical and mechanical installations
- radio interference suppression
9
Handling of the Ethernet I/O module MSX-E1701: Digital I/O
3HANDLING OF THE ETHERNET I/O MODULE
Fig. 3-1: Correct handling
- Do not touch the connectors
- Hold the module only at the sides and at the bottom
10
Other manuals for MSX-E1701
3
Table of contents
Other Addi-Data I/O System manuals
Addi-Data
Addi-Data APCI-3010 Parts list manual
Addi-Data
Addi-Data ADDIALOG PA 3110 Parts list manual
Addi-Data
Addi-Data MSX-AI-5000 User manual
Addi-Data
Addi-Data ADDINUM PA 1500 Parts list manual
Addi-Data
Addi-Data ADDINUM APCI-1500 Parts list manual
Addi-Data
Addi-Data APCI-3000 Parts list manual
Addi-Data
Addi-Data APCI-3003 Parts list manual
Addi-Data
Addi-Data ADDIALOG PA 358 Parts list manual
Addi-Data
Addi-Data ADDINUM CPCI-1500 Parts list manual
Addi-Data
Addi-Data APCI-3010 Parts list manual
