Adaptec ASR-3085 Operating manual

--------------------------------------------------------------------

README.TXT

Adaptec ASR-3085/ASR-3405/ASR-3805/ASR-31205/ASR-31605/

as of February 10, 2008

--------------------------------------------------------------------

Please review this file for important information about issues

and errata that were discovered after completion of the standard

product documentation. In the case of conflict between various

parts of the documentation set, this file contains the most

current information.

NOTE: The latest firmware, BIOS, drivers and documentation can be downloaded

from www.adaptec.com. when they become available.

The following information is available in this file:

1. Software and Documentation

1.1 Controller & Utility Software

1.2 Documentation on this CD

2. Installation Instructions

3. General Cautions

4. Known Limitations

4.1 Using the controller in a Dell Precision 530

4.2 ACU utility

4.3 FreeBSD and VMware

4.4 Adaptec Storage Manager

4.5 SAS controllers and Adaptec 335SAS enclosure

4.6 OpenServer 6.0

4.7 Creating an Array from the Adaptec Storage Manager CD

4.8 Using the controller with an Adaptec S50 JBOD Enclosure

4.9 Firmware upgrades

4.10 RAID 10/50/60 disk drive maximums

4.11 Microsoft VDS Storage Manager LUN Error

4.12 UnixWare and OpenServer

4.13 ASR-31205/ASR-31605 with Sony SDX-470V tape drive

4.14 SATA disks do not support Dual Path with Expanders

4.15 DOS OS not supported

4.16 Hot-adding Disk Drives

4.17 Booting From Non-DASD Devices

4.18 Western Digital Disk Drives

4.19 Maxtor Disk Drives

4.20 SuperMicro Disk Drive Enclosures

--------------------------------------------------------------------

1. Software and Documentation

1.1. Controller & Utility Software

Note: The latest versions of firmware, BIOS and driver software

can be downloaded from www.adaptec.com when they become

available.

- BIOS

- ACU

- Windows Drivers

o Windows 2003 Server, Enterprise, Standard, and Web Edition

o Windows 2008 Server, Enterprise, and Standard

o Windows XP All versions

o Windows Vista - All versions

- Linux Drivers

o Red Hat Enterprise 4.0, IA-32 and x64

o Red Hat Enterprise 5.0, IA-32 and x64

o SuSE Linux Enterprise Server 9.0, IA-32 and x64

o SuSE Linux Enterprise Server 10.0, IA-32 and x64

- FreeBSD Drivers

o FreeBSD 5.4 (ARCCONF 32-bit)

o FreeBSD 6.1/6.2 (ARCCONF 32/64-bit)

- SCO Drivers

o OpenServer 6.0

o UnixWare 7.1.4

- VMware Drivers

o VMware ESX Server 3.0.x

- Sun Solaris Drivers

o Solaris 10 Update 1

1.2. Documentation on this CD

- Adaptec SAS and SATA RAID Controllers Installation

and User's Guide

- Adaptec SAS and SATA RAID Controllers

README.TXT file

--------------------------------------------------------------------

2. Installation Instructions

- The Adaptec SAS and SATA RAID Controllers Installation

and User's Guide contains complete installation information for

the controllers and drivers, as well as complete instructions

for all utilities. The Adaptec Storage Manager User's Guide

contains complete installation information for the Adaptec

Storage Manager software.

--------------------------------------------------------------------

3. General Cautions

- While an array is being built or cleared, DO NOT remove and

reinsert any drive from that array. Doing so may cause

unpredictable results for any of the controller's arrays.

- While a drive is being cleared, DO NOT try to include it in a

new array. Doing so may cause unpredictable results.

- DO NOT move drives containing an array or volume from one

controller to another while the power is on. Doing so could

cause the loss of the array configuration or data, or both.

Instead, power off both affected controllers, move the drives,

and then restart.

--------------------------------------------------------------------

4. Known Limitations

4.1 Using the controller in a Dell Precision 530

When using the controller in a Dell Precision 530 with

Diskercise and Diskstress, data corruption/mis-compares may

occur.

4.2 ACU utility

On some Intel and IBM systems, when you try to run the ACU,

this message appears:

“Not enough free memory to load the utility!

Press any key to attempt loading the utility forcibly

OR Wait for the system initialization to be completed

[Default]”

This is normal. On Intel systems, wait for the system

initialization to be completed. Then the ACU will run. On IBM

systems, press any key when prompted to load the utility

forcibly.

4.3 FreeBSD and VMware

Adaptec Storage Manager is not supported in FreeBSD or VMware; storage

management must be done through the Adaptec Configuration

Utility (ACU) and ARCCONF command line utility. Refer to the

User Guides on the two CDs that were provided with your controller.

4.4 Adaptec Storage Manager

After a rebuild and waking up from hibernation, a controller

may be detected incorrectly in Adaptec Storage Manager.

Press F5 to correct the problem.

4.5 SAS controllers and Adaptec 335SAS enclosure

When the Adaptec 335SAS enclosure is attached to an Adaptec

SAS controller, such as ASR-3405SAS or ASR-3805SAS, the

enclosure numbering nomenclature starts with "0". For

example, if two Adaptec 335SAS enclosures are connected to a

ASR-3805SAS SAS controller, management tools such as Storage

Manager will denote the enclosures as "Enclosure 0" and

"Enclosure 1".

4.6 OpenServer 6.0

Arrays may not be displayed correctly, even after you restart

your computer.

To resolve the problem:

As root, run 'resmgr -r -m vtoc' until it fails. Then, as

root, run '/etc/conf/bin/idconfupdate -f'. Then, reboot.

4.7 Creating an Array from the Adaptec Storage Manager CD

When you create an array with the Adaptec Storage Manager

bootable CD, the maximum size of the array is 2 TB.

4.8 Using the controller with an Adaptec S50 JBOD Enclosure

Temperature warnings from Adaptec S50 JBOD Enclosure (firmware

version T016) are not shown in Adaptec Storage Manager (or on

the enclosure).

4.9 RAID 10/50/60 array leg limitations

A RAID 10, RAID 50, or RAID 60 array cannot have more than 32

legs when created using the Build method. Maximum disk drive

count is only limited by RAID level. For instance, a RAID 10

array built with 32 RAID 1 legs (64 disk drives) is supported;

a RAID 5 array built with 32 RAID 5 legs (96 disk drives) is

also supported. Although you can create a RAID 10 array with

more than 64 drives using the Quick Init method, the maximum

number of build/verify operations that can happen at any one

time is 32; therefore, such an array could not be verified.

4.10 Microsoft VDS Storage Manager LUN Error

On some systems when creating a new LUN, the Microsoft VDS

Storage Manager for SANs snap-in may not work properly and

crash with an MMC snap-in error.

4.11 UnixWare and OpenServer

Adding or moving controllers in an existing UnixWare or OpenServer

system may cause some device resources to change, which may lead

to the operating system being unable to boot. Currently, there

is no workaround available in the operating system. Before

installing the operating system, make sure all PCI devices are

either enabled or installed.

The individual behavior and affected devices will vary from system

to system. This is due to the different ways in which motherboards

may handle their PCI bus layouts, and how those layouts could be

changed when installing or rearranging devices. If the bus layout

changes and affects a critical system device (video, boot controller,

etc.) then the operating system may be unable to recover from that

change and be non-bootable.

4.12 ASR-31205/ASR-31605 with Sony SDX-470V tape drive

Backing up large files (800MB or larger) to a Sony SDX-470V

tape drive may generate an input/output error.

4.13 SATA disks do not support Dual Path with Expanders

Connect Dual Path SAS Enclosures with 2 Expanders only via one

Expander when using SATA disks as SATA disks do not natively support

Dual Path. If SATA disks are connected using 2 Expanders the

controller BIOS may crash if interposer cards are not used.

4.14 DOS OS not supported

The DOS environment is supported for Adaptec tool execution only

(AFU.EXE and ACU.EXE).

4.15 DAT drive restoration fails when spanning tapes

When restoring from two or more tapes with a Sony SDX-470,

Sony SDX-570, or Quantum DLT V4 DAT drive, the operation aborts

automatically when restoring the second tape but gives the

(erroneous) message "Restore Operation has Completed".

4.16 Hot-adding Disk Drives

If you hot-add multiple disks simultaneously to a large

configuration (100 disk drives or more), it may take an extended

length of time before those disk drives appear in Adaptec Storage

Manager.

With Intel Backplanes AXX4DRV3GEXP and AXX6DRV3GEXP, if a drive bay

is empty at enclosure power on and then a SATA disk drive is

hot-added into the empty bay, the controller does not detect

the new disk drive. To work around this issue, remove and reinsert

the SATA disk.

4.17 Booting From Non-DASD Devices

If your system includes multiple non-DASD (non-Direct Access Storage

Device) devices, the CD or DVD drive must be the first enumerated

non-DASD device in order to run the bootable CD included with your

controller.

4.18 Western Digital Disk Drives

Currently, Western Digital WDC1500ADFD disk drives are not supported.

4.19 Maxtor Disk Drives

Currently, Maxtor DiamondMax 17 6G160E0 disk drives are not supported.

4.20 SuperMicro Disk Drive Enclosures

If the controller does not detect disk drives installed in a

SuperMicro M28E2 Mobile Rack, use backplane SAS connectors marked with

“SAS In” only.

--------------------------------------------------------------------

This software contains the valuable trade secrets of Adaptec or its

licensors. The software is protected under international copyright

laws and treaties. This software may only be used in accordance with

the terms of its accompanying license agreement.

No part of this publication may be reproduced, stored in a retrieval

system, or transmitted in any form or by any means, electronic,

mechanical, photocopying, recording or otherwise, without prior

written consent of Adaptec, Inc., 691 South Milpitas Blvd.,

Milpitas, CA 95035.

Other manuals for ASR-3085

This manual suits for next models

Table of contents

Other Adaptec Computer Hardware manuals

Adaptec

Adaptec P Class 733/800/866MHz / 1GHz User manual

Adaptec

Adaptec DuraStor 6200S User manual

Adaptec

Adaptec RAID 2405Q User manual

Adaptec

Adaptec AUA-3100LP Manual

Adaptec

Adaptec RAID 6805Q User manual

Adaptec

Adaptec RAID 5405Z User manual

Adaptec

Adaptec ASR-6805Q User manual

Adaptec

Adaptec PowerDomain 29160 User manual

Adaptec

Adaptec 1200A User manual

Adaptec

Adaptec PowerDomain 2940UW User manual

Adaptec

Adaptec AAA-130SA SERIES Assembly Instructions

Adaptec

Adaptec FireWire 1394 User manual

Adaptec

Adaptec SCSI 58300 User manual

Adaptec

Adaptec GDT8114RZ User manual

Adaptec

Adaptec RAID 2405 User manual

Adaptec

Adaptec ACB-2010A User manual

Adaptec

Adaptec M3093GX Operating and maintenance manual

Adaptec

Adaptec 2100S - SCSI RAID Controller Safety guide

Adaptec

Adaptec ACB-2370 User manual

Adaptec

Adaptec RAID 5405 User manual

Adaptec

Adaptec 2940U2W - Storage Controller U2W SCSI 80... User manual

Adaptec

Adaptec AAR-1420SA Instruction Manual

Adaptec

Adaptec RAID Solutions Manual

Adaptec

Adaptec RAID 51245 How to use

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual