ActionTec T3200BV User manual
User Guide
Bonded VDSL2/G.fast
Wireless AC
Gateway Router
Model # T3200BV
0xxx-00xx-000 rev. x
i
Table of Contents
1 Introduction 4
Package Contents 4
Minimum System Requirements 4
Features 5
Getting to Know the Gateway 5
Connecting the Gateway 7
2 Accessing the Home Screen 9
Accessing the Home Screen 9
Icon Bar 11
Connection Status 11
3 Checking the Gateway’s Status 12
Accessing the Status Screens 12
Connection Status 13
Line 1/Line 2 Status 14
WAN Ethernet 15
Routing Table 15
Firewall Status 16
NAT Table 16
Wireless Status 17
Modem Utilization 19
LAN Status 20
ARP Table 20
Network Devices 21
Interface Statistics 21
Multicast Statistics 22
System Log 22
4 Configuring Wireless Settings 23
Accessing Wireless Settings 23
Basic Settings 24
Advanced Settings 25
WPS 26
MAC Address Control 27
Band Steering 28
i
ii
Table of Contents
ii
5 Configuring Firewall Settings 29
Accessing Firewall Settings 29
Firewall 30
IPv6 Firewall 31
Port Forwarding 32
Applications 33
DMZ Hosting 34
IPv6 DMZ Hosting 35
UPnP 36
6 Advanced Settings 37
Accessing the Advanced Setup Screens 37
Services Blocking 38
Website Blocking 39
Scheduling Access 40
Parental Controls 41
WAN IP Addressing 42
IPv6 WAN Settings 43
LAN IP Settings 44
IPv6 LAN Settings 45
DHCP Reservation 46
Dynamic DNS 47
DNS Host Mapping 48
Port Bridging 48
MoCA LAN Setup 49
Remote GUI 51
Remote Telnet 51
Dynamic Routing 52
Static Routing 53
Admin Password 54
NAT 54
Storage Device Info 55
Samba Configuration 55
Reboot 56
Restore Defaults 56
Speed Test 57
Ping Test 58
Iperf Test 59
iii
Table of Contents
IPv6 Ping Test 60
Traceroute 61
IPv6 Traceroute 61
Time Zone 62
Config Download/Upload 62
Upgrade History 63
ALG 63
DLNA 64
Load Customer Default Config 64
Print Server 65
xDSL Diagnostics 65
A Specifications 66
General 66
Wireless Operating Range 67
LED Indicators 67
Power Adapter 67
Environmental 68
Notices 69
Warranty 69
Important Safety Instructions 69
FCC Class B Equipment 70
Important Note on Wi-Fi 71
Contact Info 72
4
Introduction
Congratulations on purchasing the T3200BV Bonded VDSL2 /G.fast Wireless
AC Gateway Router. The Gateway is a single platform device that supports
universal WAN access, FTTN, FTTdp, FTTB, or FTTP. With support for
advanced 802.11ac 4x4 WiFi, the Gateway enables blazing fast HD video
streaming, with multi-channel HD video throughput. The Gateway also offers an
unprecedented level of security, helping protect your network resources. It has
also been designed to deliver unparalleled WiFi performance, using dual-band
WiFi supporting speeds up to 2.3 Gbps.
Package Contents
• Black Power adapter
• Yellow cable (Ethernet, 6 ft.)
• White cable (Ethernet, 10 ft.)
• Quick Start Guide
• Installation Guide
• Wall-mount template
• Vertical stand
Minimum System Requirements
• Active ADSL2+ service
• Computer with an 10 Mbps or 10/100/1000 Mbps Ethernet connection
• Microsoft Windows 10, 8, 7; Mac OS OS X+
• TCP/IP network protocol installed on each computer
1
5
T3200BV Gateway
Features
• ADSL2+, VDSL2, G.fast, WAN Ethernet and Fiber in a single CPE
• Dual Band WiFi delivering up to 2.3 Gbps with 802.11ac 4x4 5GHz and
802.11n 3x3 2.4GHz
• Optimized for IPTV and Video over WiFi
• SFP cage for G.fast or EPON/GPON ONT modules
Getting to Know the Gateway
This section contains a quick description of the Gateway’s lights, ports, and other
features. The Gateway has several indicator lights (LEDs) and a button on its front
panel, and a series of ports and switches on its rear panel.
Front Panel
The front panel of the Gateway features 2 LEDs (Internet and Wi-Fi), and a WPS
(Wireless Protected Setup) button.
Internet
The Internet LED illuminates green when the Gateway is properly connected to
a WAN Internet connection.
Wi-Fi LED
The Wi-Fi LED illuminates green when the Gateway’s wireless network is oper-
ating and properly configured.
WPS Button
The WPS button is used when connecting a wireless device to the Gateway’s
wireless network using WPS.
6
Introduction
Rear Panel
The rear panel of the Gateway features 10 ports, and a Reset button.
Power Port
The Power port is used to connect the Power cord (Model No. CDS036-
W120U,made by Adapter Technology Co Ltd) to the Gateway.
Reset Button
Depressing the Reset button for 10 seconds will restore the Gateway’s factory
default settings. The reset process will start after releasing the button.
WARNING! Do not unplug the Power cord from the Gateway
during the reset process. Doing so may result in permanent damage
to the Gateway.
SFP Cage
The SFP cage is used to connect the Gateway to a service provider connection
via optical fiber cable.
WAN Ethernet Port
The WAN Ethernet port is used to connect the Gateway to a WAN connection
via an Ethernet cable.
LAN Ethernet Ports (4)
The LAN Ethernet ports are used to connect computers to the Gateway via
Ethernet cable. The Ethernet ports are 10/100/1000 Mbps auto-sensing ports,
and either a straight-through or crossover Ethernet cable can be used when con-
necting to the ports.
USB Port
The USB port is used to connect the Gateway to a USB device.
7
T3200BV Gateway
DSL Ports (2)
The DSL ports are used to connect the Gateway to a DSL wall outlet via DSL
cable. For single line DSL, use the DSL 1 port.
Connecting the Gateway
There are many variables involved when connecting the Gateway, depending on
the type of Internet service available. The figure below shows all of the possible
connections available for the Gateway.
Power
Outlet
Power
Adapter
Coaxial
Outlet
MoCA
Cable
T3200M
Optical
Fiber
Cable
WAN Ethernet
Cable
LAN Ethernet
Cable
Ethernet
Port of
Device
WAN
Ethernet
Port
USB
Cable
USB
Port of
Device
Service
Provider
C
onnection
(Rear Panel)
DSL
Cable
DSL
Outlet
Connecting a Computer to the Gateway
To connect a computer to the Gateway to access the Gateway’s graphical user
interface (GUI):
8
Introduction
1. Get the Gateway and black Power cord from the box.
2. Plug the black Power cord in the black port on the back of the Gateway and
then into a power outlet.
3. Plug the yellow Ethernet cable from the box into one of the four yellow
Ethernet ports on the back of the Gateway.
4. Make sure the computer is powered on, then plug the other end of the
yellow Ethernet cable into an Ethernet port on the computer.
5. Make sure that the LED on the LAN port into which the Ethernet cable is
plugged glows steadily green. This may take a few moments.
6. The computer should either be configured with a statically defined IP address
and DNS address, or instructed to automatically obtain an IP address using
the Network DHCP server. The Gateway is set up, by default, with an active
DHCP server, and it is recommended to leave this setting as is.
9
Accessing the
Home Screen
This chapter gives a short overview of the Home screen of the Gateway’s graphical
user interface (GUI).
Accessing the Home Screen
To access the Home screen:
1. Open a Web browser on computer connected, via Ethernet cable, to one of the
Gateway’s LAN ports. In the Address text box, type:
http://192.168.0.1
then press Enter on the keyboard.
2
Table of contents
Other ActionTec Network Router manuals
ActionTec
ActionTec GE344000-01 User manual
ActionTec
ActionTec GT704-WG Operating instructions
ActionTec
ActionTec MI424-WR User manual
ActionTec
ActionTec V1000H User manual
ActionTec
ActionTec GT724WG User manual
ActionTec
ActionTec C2000A Installation instructions
ActionTec
ActionTec GT704WR User manual
ActionTec
ActionTec MegaPlug HPE400AVP User manual
ActionTec
ActionTec GT784WN User manual
ActionTec
ActionTec GT784WNV Verizon User manual
ActionTec
ActionTec MI424-WR User manual
ActionTec
ActionTec SW501R User manual
ActionTec
ActionTec Wireless-Ready User manual
ActionTec
ActionTec M1424WR User manual
ActionTec
ActionTec GT724R User manual
ActionTec
ActionTec T3200M User manual
ActionTec
ActionTec C2000A Dimensions
ActionTec
ActionTec Verizon GT784 User manual
ActionTec
ActionTec T3280B User manual
ActionTec
ActionTec GT784WN User manual
