Acnodes RMW7175 User manual
All rights reserved. Product description and product specifications aresubject to changewithout notice.
For lastest product information, please visit Acnodes’ website at www.acnodes.com
14628 Central Ave. Chino, CA 91710 Tel: 909.597. 7588 Fax: 909. 597.1939
© C opyright 2016 Acnodes C orp.
1.Control Button
LCD OSD Function:
On/Off
On/Off the PC
Space
1. Adjust the display to the best position. 2. Exit the options
Enter
Menu/Select function: 1. Call the Menu 2. Confirm the selection
UP▲
Press the button to adjust the increasing value of selected OSD
control option.
Down▼
Press the button to adjust the decreasing value of selected OSD
control option.
Keyboard FN key:
Other keys are workable under OS environment:
1,2,3,4,5
Mapping to keyboard “1”, “2”, “3”
F1
Mapping to keyboard “F1” key
F2
Mapping to keyboard “F2” key
ESC
Mapping to keyboard “ESC” key
2.Quick Selecting Menu
1.「▲」：Press this key can quickly go to signal input selection menu, (if the monitor has
more than one input source), there are “Auto/VGA/DVI” three modes.
Press ▲, ▼to choose, press Menu to confirm the selection.
3.「Space」: Press this key can adjust the display to the best position and resolution.
3. Main Menu
Press「Enter」and the screen will appear the following OSD icons:
OSD Menu Adjustments:
Press「▲」,「▼」to increase or decrease the light bar for moving to the right icon you to
adjust.
Press 「Enter」again to confirm in the selected item.
Then, the selected bar will become yellow at bottom under the item.
Press 「▲」or 「▼」to select the item and press「Enter」again, the value will turn red,
press「▲」or 「▼」to increase or decrease the value.
When it is finished, press「Enter」to exit; the red value will turn back to yellow. Then you can
continue to next adjustment.
Color Luminance Adjustment
Contrast: Adjust the contrast level of brightness and darkness of the screen.
Brightness: Adjust the brightness of the screen.
Backlight：
The backlight has default set in the brightest.
Normally the function has no effect.
BRIGHTNESS：
Adjust the brightness of the screen.
CONTRAST：
Adjust the contrast level of brightness and darkness of the
screen.
SHARPNESS:
Adjust the sharpness of display
Display
Image H./V. Position
Contrast: Adjust the contrast level of brightness and darkness of the screen.
Brightness: Adjust the brightness of the screen.
AUTO ADJUSTMENT:
Auto adjusting the display position and its best phase and clock settings.
H. POSITION：
Adjust the size of horizontal image (left and right sides).
V. POSITION：
Adjust the size of vertical image (up and down sides).
PIXEL CLOCK：
This is normally set by different clocks, factory default has been setup
PHASE：
Adjust the image distortion appearing as horizontal “noise” on the screen.
COLOR Temp
9300K：
Asian Area.
7500K：
Asian Area.
6500K：
Europe and North American Area.
SRGB：
Europe and North American Area.
USER COLOR：
RED：
GREEN：
BLUE：
User’s setting.
Red adjustment. User’s setting Remark 1
Green adjustment. User’s setting Remark1
Blue adjustment. User’s setting Remark1
OSD
OSD POSITION：
Display the location of OSD Menu.
OSD TIME OUT：
Reset ：
LANGUAGE ：
Display time duration of OSD Menu.
Recall Setting Value Yes/No.
Select Languages Remark2
Remark 1.: When moving the light bar to the selected item, press ENTER (MENU/ENTER), the bar and value will
become yellow (or red), then press「Up」or「Down」to adjust the value.
Remark 2: Language Selection
English
Français：French
Deutsch：German
Español：Spanish
日本語：Japanese
繁體中文：Traditional Chinese
簡體中文：Simplified Chinese
Others
Reset: Recall settings to the factory default setting
Menu Time: OSD Menu showing period during no any instructions given.
OSD H. Position：Present the position of the OSD horizontal position
OSD V. Position： Present the position of the OSD vertical position
Language: English / French / German / Japanese/ 繁體中文 / 簡體中文
Transparency: Adjust the OSD transparency shown on the display
Rotate: Default is “Off”, for others please request to your distributor or sales representative
Source Selection
Input Signal Selection:
Two Input are supported: Digital and Analog
If both digital and analog are connected, use the switch to select either Digital or Analog input
Auto Select: Default the OSD should auto detect the signal input
D-SUB： Input analog signal.
DVI： Input digital signal.
Information
Display the video information presenting to the current states.
Table of contents
Other Acnodes Monitor manuals
Acnodes
Acnodes RP 1205 User manual
Acnodes
Acnodes APH8185 User manual
Acnodes
Acnodes RM 6195 User manual
Acnodes
Acnodes RM 6200 User manual
Acnodes
Acnodes PM6120 User manual
Acnodes
Acnodes PM6150 User manual
Acnodes
Acnodes PMH 8064 User manual
Acnodes
Acnodes APW5170 User manual
Acnodes
Acnodes APH 9190 User manual
Acnodes
Acnodes APH 9190 User manual
Acnodes
Acnodes PM 610 User manual
Acnodes
Acnodes RMW6173 User manual
Acnodes
Acnodes RM 6210 User manual
Acnodes
Acnodes PM 610 User manual
Acnodes
Acnodes RMW7190 User manual
Acnodes
Acnodes RM 6173 User manual
Acnodes
Acnodes PM6104 User manual
Acnodes
Acnodes APW4015 User manual
Acnodes
Acnodes RM 6150 User manual
Acnodes
Acnodes RM 6190N User manual
