Acnodes APH8185 User manual
All rights reserved. Product description and product specifications aresubject to changewithout notice.
For lastest product information, please v isit Acnodes’ website at www.acnodes.com
14628 Central Ave. Chino, CA 91710 Tel: 909.597. 7588 Fax: 909.597.1939
© C opyright 2017Acnodes C orp.
The OSD Control
Control Key Definition
1. Power LED Indicator: Green Light is with the signal; Red Light is out of signal or extraordinary.
2. Sleeping Mode Indicator: Red light indicator when the monitor going to sleep
3. 「On/Off」: Press the button to turn on/off the display.
4. 「Menu/Select」: 1. Call the Menu 2. Confirm the selection
5. 「Auto/Exit」: 1. Adjust the display to the best position. 2. Exit the options
6.「+」:Press the button to adjust the increasing value of selected OSD control option.
7.「-」: Press the button to adjust the decreasing value of selected OSD control option.
Quick Selecting Menu
1.「+ 」：Press this key can quickly go to signal input selection menu, (if the monitor has more
than one input source), there are “Auto/VGA/DVI” three modes. Default is in “Auto” state.
Then press “OK (Menu)” key to confirm the selection.
2.「Auto/Exit」: Press this key can adjust the display to the best position and resolution.
OSD Menu Operation
Press「MENU」and the screen will appear the following OSD icons:
1.Power LED
2.Sleeping Mode
LED
3.
4.
5.
6.
7.
OSD Menu Adjustments:
Press「+」,「-」to increase or decrease the light bar for moving to the right icon you
want to adjust.
Press 「MENU/ENTER」again to confirm in the selected item.
Then, the selected bar will become yellow at bottom under the item.
Press 「+」or「-」to select the item and press「MENU/ENTER」again, the value will
turn red, press「+」or「-」to increase or decrease the value.
When it is finished, press「MENU/ENTER」to exit; the red value will turn back to yellow.
Then you can continue to next adjustment.
Color Luminance Adjustment
Contrast: Adjust the contrast level of brightness and darkness of the screen.
Brightness: Adjust the brightness of the screen.
Backlight
：
Th
e backlight has default set in the most bright.
Normally the function has no effect.
BRIGHTNESS
：
Adjust the brightness of the screen.
CONTRAST
：
Adjust the contrast level of brightness and darkness of the
screen.
SHARPNESS:
Adjust
the sharpness of display
Display
Image H./V. Position
Contrast: Adjust the contrast level of brightness and darkness of the screen.
Brightness: Adjust the brightness of the screen.
AUTO
ADJUSTMENT
:
Auto
adjusting the display position and its best phase and clock
settings.
H
. POSITION：
Adjust the size of horizontal image (left and right sides).
V
. POSITION：
Adjust the size of vertical image (
up and down sides).
PIXEL
CLOCK：
This is normally
set by different clocks, factory default has been setup
PHASE
：
Adjust the image distortion appearing as horizontal “noise” on the
screen.
OSD
OSD POSITION
：
Display the location of OSD Menu.
OSD TIME OUT
：
Reset
：
LANGUAGE
：
Display time duration of OSD Menu.
Recall Setting Value Yes/No.
Select Languages
Remark2
Remark 2: Language Selection
English
Français：French
Deutsch：German
Español：Spanish
日本語：Japanese
繁體中文：Traditional Chinese
簡體中文：Simplified Chinese
COLOR Temp
9300
K：
Asian
Area.
7500
K：
Asian
Area.
6500
K：
Europe
and North American Area.
SRGB
：
Europe
and North American Area.
USER
COLOR：
RED
：
GREEN
：
BLUE
：
User’s
setting.
Red adjustment. User’s setting
Remark 1
Green
adjustment. User’s setting Remark1
Blue
adjustment. User’s setting Remark1
Remark 1.: When moving the light bar to the selected item, press ENTER (MENU/ENTER), the bar and value will
become yellow (or red), then press「+」or「-」to adjust the value.
Others
Reset: Recall settings to the factory default setting
Menu Time: OSD Menu showing period during no any instructions given.
OSD H. Position：Present the position of the OSD horizontal position
OSD V. Position：Present the position of the OSD vertical position
Language: English / French / German / Japanese/ 繁體中文 / 簡體中文
Transparency: Adjust the OSD transparency shown on the display
Rotate: Default is “Off”, for others please request to your distributor or sales representative
Source Selection
Input Signal Selection:
Two Input are supported: Digital and Analog
If both digital and analog are connected, use the switch to select either Digital or Analog input
Auto Select: Default the OSD should auto detect the signal input
D-SUB：Input analog signal.
DVI：Input digital signal.
Display the video information presenting to the current states.
Information
Table of contents
Other Acnodes Monitor manuals
Acnodes
Acnodes APH 8170 User manual
Acnodes
Acnodes PM 610 User manual
Acnodes
Acnodes RP 1205 User manual
Acnodes
Acnodes KDS 6198 User manual
Acnodes
Acnodes PMW6220 User manual
Acnodes
Acnodes RM 6210 User manual
Acnodes
Acnodes APS901 Series User manual
Acnodes
Acnodes APH 9190 User manual
Acnodes
Acnodes APH 8190 User manual
Acnodes
Acnodes APW 5220 User manual
Acnodes
Acnodes RM 6120 User manual
Acnodes
Acnodes RM 6154 User manual
Acnodes
Acnodes RPQ1190 User manual
Acnodes
Acnodes RMQ9190 User manual
Acnodes
Acnodes KD 9171N User manual
Acnodes
Acnodes PMH8170 User manual
Acnodes
Acnodes RM-6170 User manual
Acnodes
Acnodes PM 1210 User manual
Acnodes
Acnodes RM 6104D User manual
Acnodes
Acnodes PM6200 User manual
