Acnodes RMW7170 User manual
User Manual
All rights reserved. Product description and product specifications are subject to change without notice.
For lastest product information, please visit Acnodes’ website at www.acnodes.com
14628 Central Ave. Chino, CA 91710 Tel: 909.597.7588 Fax: 909.597.1939
© Copyright 2019 Acnodes Corp.
Industrial Monitors
6U Rackmount LCD Monitor
HDMI + DVI-D + VGA Video Input
16.2" 1920 x 1200 TFT LCD
RMW7170
Legal Information
First English printing, July 2019
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
■Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■Any product, on which the serial number has been defaced, modified or removed.
■Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■Re-position or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Contents
< Part. 1 > RMW7170
1.1 Package Content P.1
1.2 Structure Diagram & Dimension
P.1-2
1.3 Installation P.3
< Part. 2 > Specifications / OSD
2.1 Product Specifications P.4
2.2 On-screen Display Operation ( OSD ) P.6
2.3 Picture In Picture ( PIP ) / Picture By Picture ( PBP ) P.8
< Part. 3 > Options
3.1 P.10
3.2 P.11
3.3 P.12
3.4 P.13
3.5
3G / HD / SD-SDI Broadcast-grade input
MCS Multi-display control solution
Touchscreen : Resistive ( 1-point touch ) DC
Power : 12V / 24V / 48V / 125V
Touchscreen : Resistive ( 1-point touch )
P.14
■It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
How To Clean Your LCD Monitor
Caution :
■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
Disconnect the power cord.
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
1
2
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
Disconnect the power cord.
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Gently wipe the surface. Use as little pressure as possible.
Wait until your monitor is completely dry before plugging it in and powering it up.
1
2
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
3
4
P. 1
Power VGADVI-D HDMI
Audio
out
Basic I/O : VGA + DVI-D + HDMI
Options : Audio, SDI, USB for touchscreen & DC power
RMW7170 unit X 1
- 6ft VGA cable X 1
- Power adapter X 1
- Power cord X 1
< 1.2 > Structure Diagram
1
2
Front view
Rear view
3
Power adapter
Power cord
3
LCD panel
LCD membrane
Audio speaker
Power adapter basket
1
2
3
4
< Part 1 > RMW7170
< 1.1 > Package Content
P. 2
< 1.2 > Dimension
Front View
Side View
UNIT : mm
1mm = 0.03937 inch
Bottom View
Model Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
RMW7170
480 x 48 x 266 mm
18.9 x 1.9 x 10.5 inch
529 x 124 x 451 mm
20.8 x 4.9 x 17.8 inch
4.2 kg
9.2 lb
6.2 kg
13.6 lb
P. 3
< 1.3 > Installation
Step
■Mount the display panel with M6 screw set.
■M6 screw x 4 pcs required ( Left & right side ).
M6 screw sets are not provided.
1
Step
■Fix the LCD into the rack.
2
P. 4
LCD
Panel
Panel Size ( diagonal ) 16.2-inch Widescreen TFT color LCD
Display pixel ( dots x lines ) 1920 x 1200
Brightness ( typ. ) 300
Contrast Ratio ( typ. ) 800:1
Color 16.7 M, 8-bit
Viewing Angle ( L/R/U/D ) 89/89/89/89
Response Time ( ms ) 30
Dot pitch ( mm ) 0.191
Display Area ( mm ) 343.80H x 214.90V
Surface treatment Anti-glare, Hard-coating
Surface hardness 3H
Backlight Type LED
MTBF ( hrs ) 20,000
Video
Connectivity
Digital HDMI HDMI 1.4, HDCP 1.4
DVI DVI-D, TMDS single link
Analog VGA Analog 0.7Vp-p
Plug & Play DVI / VGA VESA EDID structure 1.3
Synchronization VGA Separate, Composite & SOG
Audio
Connectivity
Audio Output Connector 3.5mm stereo jack
Resistance / Power level 30kΩ/ 2.8V
Speaker Dual Stereo Speaker 2W x 2
* When the audio output is connected, speaker output is OFF
Power Power Supply Range Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption Screen display ON Max. 34W
Power saving mode Max. 4W
Power button OFF Max. 1W
Regulatory Safety FCC & CE certified
Environmental RoHS2 & REACH compliant
< Part 2 > Specifications / OSD
< 2.1 > Product Specifications
P. 5
Environmental
Conditions
Operating Temperature 0 to 55°C degree
Humidity 20~90%, non-condensing
Altitude 16,000 ft
Storage / Non-operating Temperature -20 to 60°C degree
Humidity 5~90%, non-condensing
Altitude 40,000 ft
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random
Applicable
Format
DVI-D / VGA Input PC Signal 1920 x 1200 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
HDMI Input * PC Signal Same as VGA
Video Signal 1080p : 60Hz
720p : 50 / 60Hz
480p : 60Hz
576p : 50Hz
Audio Signal 2ch Linear PCM ( 32 / 44.1 / 48 KHz )
* In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio signals, the LCD may display incorrectly on
a full screen. If so, please adjust the display card setting on display size to fix the issue.
Physical
Specification
Product ( W x D x H ) 480 x 48 x 266 mm
18.9 x 1.9 x 10.5 inch
Packing ( W x D x H ) 529 x 124 x 451 mm
20.8 x 4.9 x 17.8 inch
Net Weight 4.2 kg / 9.2 lb
Gross Weight 6.2 kg / 13.6 lb
* All dimensions stated are subject to change if options are selected / integrated to base model part codes
P. 6
Remark : All LED touch buttons in WHITE light.
The LED of Power touch button will flash continuously when there is
no signal input.
All the LED touch buttons will automatically turn off after 10 minutes of idle status
( except the Power ).
Light up all membrane buttons, please press any button for 1 - 2 seconds ( except
the Power ).
1
2
Exit the OSD screen
Go back to the previous on-screen sub-menu or
main menu
Scroll through menu options and adjust
the displayed control
Display the OSD menu
Act as an Enter key to select screen setting options
Turn the monitor on or off
Membrane Switch Function
< 2.2 > On-screen Display Operation ( OSD )
Table of contents
Other Acnodes Monitor manuals
Acnodes
Acnodes PM 1510 User manual
Acnodes
Acnodes RM 6190N User manual
Acnodes
Acnodes APS901 Series User manual
Acnodes
Acnodes PM 1210 User manual
Acnodes
Acnodes RM60 Series User manual
Acnodes
Acnodes RM-6170 User manual
Acnodes
Acnodes PM6190 User manual
Acnodes
Acnodes RM-6170 User manual
Acnodes
Acnodes APH 9190 User manual
Acnodes
Acnodes RMW7190 User manual
Acnodes
Acnodes APM 5064 User manual
Acnodes
Acnodes RM9230 User manual
Acnodes
Acnodes APM5200 User manual
Acnodes
Acnodes APH8172 User manual
Acnodes
Acnodes APW4015 User manual
Acnodes
Acnodes RMQ9190 User manual
Acnodes
Acnodes RMW6170 User manual
Acnodes
Acnodes PM6200 User manual
Acnodes
Acnodes RM 6195 User manual
Acnodes
Acnodes APW5170 User manual
