ACME BH30 User manual
Model: BH30
bluetooth
headset
4 GB User’s manual 69 Warranty card
9 LT Vartotojo gidas
14 LV Lietošanas instrukcija
19 EE Kasutusjuhend
24 PL Instrukcja obsługi
29 DE Bedienungsanleitung
34 RU Инструкция пользователя
39 UA Інструкція
44 RO Manual de utilizare
49 BG Ръководство за употреба
54 ES Manual de usuario
59 HR Upute za upotrebu
64 SI Uporabniška navodila
3
4
GB
Overview
1. ON/OFF switch
2. Answer/end call / enter pairing mode
3. TF card slot
4. LED indicator
5. VOL+/Next
6. Play/pause / switch mode
7. VOL- / Previous
8. Built-in microphone
9. micro USB slot
10. 3.5mm audio input
Pairing the headset with a Bluetooth cell phone
1. Turn ON the headset;
2. Press and hold ( ) button for 2 seconds until LED starts to blink;
3. Place the headset and Bluetooth cell phone where they are easily viewable, no more than
1 metre apart;
4. Activate your cell phone’s Bluetooth function and set your cell phone to search for Blue-
tooth devices within range, and select“BH30”from the list of devices shown;
5. According to the indication, enter password or PIN No.:“0000”;
6. If prompted by your cell phone to connect, select “Yes” (this will vary among cell phone
models);
5
GB
Basic operation
Function Operation
Turning on the headset Set ON/OFF switch to the ON position
Turning o the headset Set ON/OFF switch to the OFF position
Mode switch
Press and hold the button for 2 seconds, it
will enter into mode switch; you can switch among
TF card, FM radio or Bluetooth modes:
TF card mode Insert the TF card into the TF card slot, the blue light on the
right will start ashing. Select TF card mode.
TF card mode
FM radio mode
Bluetooth modes
6
GB
FM Radio mode Select FM radio mode. Short press VOL+ button to next
frequency, and short press VOL- button to previous frequency.
Line in function Connect the Ø3.5 mm audio cable to the audio source.
When connecting with other audio devices, the headset will
automatically playing the music sourcing from them.
Bluetooth Music Select Bluetooth mode. Pair your device with the headset.
Switch your device into music playing mode and choose the
song to play.
Answer a call Press button
Cancel call Press button
Card reader function Connect headset to PC via microUSB cable. Turn ON the
headset. Now you can copy audio les to TF card.
Charging
Connect headphones to the charger (DC 5V) or computer USB
port via micro USB cable.
The red light will keep lighting up when charging. After full
charged, the red light will turn o.
7
GB
Music playback
Function Operationion
Play/pause Short press button to play or stop the music.
Next song Short press VOL+ button
Previous song Short press VOL- button
Volume up Press and hold the VOL+ button
Volume down Press and hold the VOL- button
Care and maintenance
• Don’t use abrasive cleaning solvents to clean the headset.
• Do not expose the headset to extremely high or low temperature as this will shorten the life
of electronic devices, destroy the battery or distort certain plastic parts.
• Don’t dispose of the headset in a re as it will result in an explosion.
• Don’t expose the headset to contact with sharp objects as this will cause scratches and
damage.
• Don’t let the headset fall down onto the oor. The internal circuit might get damaged.
• Don’t attempt to disassemble the headset as it may get damaged if you are not professional.
• In case the headset doesn’t function properly, send it to the store you bought it. The sta will
help you to solve the problem.
8
GB
Waste Electrical and Electronic Equipment (WEEE) Symbol
The use of the WEEE symbol indicates that this product may not be treated as
household waste. By ensuring this product is disposed of correctly, you will help
protect the environment. For more detailed information about the recycling of this
product, please contact your local authority, your household waste disposal service
provider or the shop where you purchased the product.
9
LT
Apžvalga
1.„ON / OFF“ (ĮJ. / IŠJ.) jungiklis
2. Atsiliepimo į skambutį / pokalbio baigimo / įvesti siejimo režimą
3. TF kortelės lizdas
4. Šviesos diodo indikatorius
5.„VOL+ / Next“ (pagarsinti / kitas)
6. Leisti / stabdyti / perjungimo režimas
7.„VOL- / Previous“ (patylinti / ankstesnis)
8. Integruotas mikrofonas
9. MikroUSB lizdas
10. 3,5 mm garso įvestis
Ausinių siejimas su„Bluetooth“ mobiliuoju telefonu
1. Įjunkite ausines;
2. Nuspauskite ir 2 sekundes laikykite nuspaustą ( ) mygtuką, kol pradės mirksėti
šviesos diodas;
3. Suaktyvinkite telefono „Bluetooth“ funkciją ir nustatykite telefoną ieškoti „Bluetooth“
prietaisų. Dėl procedūros žr. savo telefono naudojimo instrukciją.
4. Iš rastų prietaisų sąrašo pasirinkite laisvų rankų įrangą (BH30).
5. Norėdami suporuoti ir prijungti laisvų rankų įrangą prie telefono, įveskite slaptažodžio
kodą 0000. Kai kuriuos telefonus po poravimo reikia prijungti atskirai. Dėl procedūros žr.
savo telefono naudojimo instrukciją.
10
LT
Funkcijos
Funkcija Veiksmas
Ausinių įjungimas Jungiklį„ON / OFF“ nustatykite į padėtį„ON“
Ausinių
išjungimas Jungiklį„ON / OFF“ nustatykite į padėtį„OFF“
Režimo
perjungimas
Norėdami perjungti režimą, nuspauskite ir 2 sekundes laikykite
nuspaustą mygtuką. Galite perjungti į TF kortelės, FM radijo
arba„Bluetooth“ režimus:
TF kortelės
režimas Įdėkite TF kortelę į TF kortelės lizdą, tada pradės mirksėti dešinėje
pusėje esanti mėlyna lemputė. Pasirinkite TF kortelės režimą.
TF kortelės
režimas
FM radijo režimas
„Bluetooth“ režimas
Table of contents
Languages:
Other ACME Headset manuals
