AccuEnergy Accuvim II User manual
I
Ethernet Modual
Copyright©2007 V1.01
This manual may not be reproduced in whole or in part by any means, without
written permission of Accuenergy.
The information contained in this document is believed to be accurate at the
time of publication, however, Accuenergy assumes no responsibility for any
errors which may appear here and reserves the right to make changes without
notice. Please ask the local representative for latest product specifications
before ordering.
II
Ethernet Modual
Please read this manual carefully before dong installation, operation and
maintenance of Acuvim II meter.
Following symbols are used in this user’s manual and on Acuvim II meter to
alert the dangerous or to prompt in the operating or set process.
Dangerous symbol, Failure to observe the information may result in
injury or death.
Alert symbol, Alert the potential dangerous. Observe the information
after the symbol to avoid possible injury or death.
Focus symbol, avoid inadvertent operations which may lead to
abnormal working of instrument, even damage to the instrument or
physical harm.
This mark is on product for UL Listed product
Installation and maintenance of the Acuvim II meter should only be performed
by qualified, competent personnel that have appropriate training and
experience with high voltage and current device.
This document is not fit for any untrained people. Accuenergy is not
responsible for any problem happens under proper operation.
III
Ethernet Modual
Chapter 1 Introduction------------------------------------------------------------------1
1.1 Ethernet Introduction---------------------------------------------------2
1.2 Function Description of Ethernet module-----------------------------2
Chapter 2 Wiring and Connection-----------------------------------------------------5
2.1 Appearance and Dimensions--------------------------------------------6
2.2 Installation Method------------------------------------------------------7
2.3 Denition of RJ45 Interface---------------------------------------------8
2.4 Cable-----------------------------------------------------------------------9
2.5 Connection Method------------------------------------------------------9
Chapter 3 Function Description of Ethernet MODULE----------------------------11
3.1 Initializing Ethernet Module-------------------------------------------12
3.2 Searching IP Address of Ethernet Module----------------------------22
3.3 Description of Modbus/TCP protocol---------------------------------24
3.4 Browse Webpage and Set Parameters--------------------------------32
3.5 Mail Function------------------------------------------------------------45
Appendix----------------------------------------------------------------------------------47
Appendix A Technical Data and Specications---------------------------------------48
Appendix B Ordering Information------------------------------------------------------49
Appendix C Revision History------------------------------------------------------------50
Content
IV
Ethernet Modual
Starting!
This manual is about Ethernet module of Acuvim II meter. With Ethernet
module, Acuvim II meter can be linked to Ethernet network easily, and it can
realize distribution automation based on Ethernet.
Please read this manual carefully before operating and setting the Acuvim II
meter to avoid unnecessary trouble.
Chapter 1 helps you to understand the fundamental concept of Ethernet, and
application points of Ethernet module.
Chapter 2 describes in detail hardware features of Ethernet module.
Chapter 3 describes in detail function application of Ethernet module.
Appendix lists technical data and specications and ordering information of
Ethernet module.
1
Chapter 1 Introduction
Ethernet Introduction
Function Description
2
Ethernet Modual
Ethernet module is an extended communication module of Acuvim II
meter. With Ethernet module, Acuvim II meter can be linked to Ethernet
easily.
1.1 Ethernet Introduction
Ethernet was originally developed by Xerox and then developed further
by Xerox, DEC, and Intel. Ethernet uses a Carrier Sense Multiple Access
with Collision Detection (CSMA/CD) protocol, and provides transmission
speeds up to 10 Mbps.
Now Ethernet stands for LAN with CSMA/CD protocol.
Ethernet is not a material network, and it is the technology standard.
Ethernet is the most current communication standard in LAN. This
standard denes the used type of cable and the used method of Signal
processing in LAN.
1.2 Function Description of Ethernet module
Please read appendix of technical data and specifications of Ethernet
module before using it.
﹡The Ethernet module supports Modbus/TCP protocol. It is used as
server, and the default value of protocol port is 502, and the user dened
range of protocol port is 2000~5999. Device address is the same as
Acuvim II meter.
﹡The Ethernet module supports SMTP protocol. It has Mail Function and
supports “Send mail for timing” mode and “Send mail for event” mode.
﹡The Ethernet module supports HTTP protocol. It is used as HTTP server,
3
Ethernet Modual
and the default value of protocol port is 80, and the scope of protocol
port is 6000~9999.
4
Ethernet Modual
Table of contents
