Abus wAppLoxx Pro Series User manual
[1] wAppLoxx Pro oval –installation instructions
Installation and operating
instructions
wAppLoxx Pro
WLX Pro Access and Intrusion
WLX Pro Oval
WLX Pro Rokoko
[2] wAppLoxx Pro oval –installation instructions
Contents
General.................................................................................................................................................... 3
Technical data ......................................................................................................................................... 5
Installing the wAppLoxx Pro Cylinder...................................................................................................... 6
wAppLoxx Pro oval cylinder individual parts....................................................................................... 6
Operating the wAppLoxx Pro, reader outside..................................................................................... 7
Operating the wAppLoxx Pro Rokoko ................................................................................................. 9
Logging the wAppLoxx Pro Cylinder into and out of the wAppLoxx Control ........................................ 12
Operating the wAppLoxx Pro Cylinder .................................................................................................. 13
[3] wAppLoxx Pro oval –installation instructions
General
This product complies with current domestic and European regulations. Conformity has
been certified, and all related certifications are available from the manufacturer on
request. To ensure the condition of this product is maintained and that safe operation is
guaranteed, these operating instructions must be observed. No part of the product may
be changed or modified in any way.
ABUS Security-Center GmbH & Co. KG shall not be held liable for loss or damage caused –
or alleged to have been caused –either directly or indirectly by this manual. We reserve
the right to make changes to this manual without prior notice.
ABUS Security-Center hereby declares that the radio system type 505272 and all WLX Pro
cylinders comply with RED Directive 2014/53/EU. The full EU Declaration of Conformity
text can be found at:
https://www.abus.com/ger/Objektsicherheit /Zutrittskontrolle/wAppLoxxPro
Safety information
Explanation of symbols:
The triangular warning symbol indicates important notes in this user guide which must
be observed.
The triangular high voltage symbol is used to warn of the risk of
injury or health hazards (e.g. caused by electric shock).
This symbol indicates special tips and notes on the operation of the unit.
Information on the wireless range:
It is essential to check whether there is an adequate wireless connection prior to
installation and commissioning.
[4] wAppLoxx Pro oval –installation instructions
Information on the battery:
The wAppLoxx Pro Cylinder is powered with direct current via a 3 V CR2 lithium battery that is
included in the scope of delivery.
In order to ensure a long lifespan and to prevent fire and injury, comply with the
following instructions:
•When inserting the battery, ensure the polarity is correct.
•Batteries must not be exposed to direct sunlight or other heat sources or stored in
places exposed to very high temperatures.
•Keep batteries away from children.
•Batteries are not rechargeable.
•Batteries must not be dismantled, pierced or otherwise damaged. They must not be
burned, come into contact with water or be short-circuited.
•When replacing the batteries, the respective temperature specifications of the
manufacturer must be observed
To ensure a long lifespan and safe operation, you must use the following high-quality
batteries:
VARTA CR2 / CR17355 3 V lithium battery
If you do not use a Varta CR2 battery, the specified lifespan cannot be guaranteed and
it is not possible to ensure that the battery warning display of the WLX Pro Control will
be correctly displayed.
[5] wAppLoxx Pro oval –installation instructions
Technical data
Cylinder variants: WLX Pro Nordic, reader outside
WLX Pro Nordic Rokoko
Scope of delivery: Double knob cylinder, quick guide, 3 V CR2 lithium battery,
forend screw
Required accessories: ABUS Mifare DESfire EV1 Tag, WLX Pro Tool Set, small (battery
replacement)
Optional accessories: WLX card reader
Tags: ABUS Mifare DESfire EV1 Tag
4-byte/7-byte Mifare Classic tags
(we accept no liability for the use of other tags)
Configuration: Via wAppLoxx Pro Control
Power supply: 3 V CR2 lithium battery
Conditions of use: -25 °C to +65 °C
Drilling protection Standard, Security
IP protection class: IP 67
Outer knob dimensions: Diameter 38 mm, length 48 mm
Material: Knob: stainless steel, reading cap: plastic
Outer knob colour variants: black, white, grey
Delivery status: Coupled
(Decoupling is not carried out until it has been successfully
programmed into the wAppLoxx Pro Control)
Functions: Opening period can be set to 6 or 12 seconds
Tag reader
Remote access
[6] wAppLoxx Pro oval –installation instructions
Installing the wAppLoxx Pro Cylinder
wAppLoxx Pro oval cylinder individual parts
1. Outer cap
2. WLX Pro cylinder body oval
3. Battery
4. Mounting plate
5. Basket
6. PCB bracket
7. Electronic screws
Tools required (must be ordered separately):
a. Outer cap opening key
1
2
3
a
4
5
6
7
[7] wAppLoxx Pro oval –installation instructions
Operating the wAppLoxx Pro, reader outside
Removing the outer cap 1
The outer cap (1) has to be removed in order to insert
the battery (3). Using the opening key (a), fix the
mounting plate (4) onto its notch and unscrew the outer
cap (1).
Removing the outer cap 2
The sealing ring (marked red) of the knob is located just
behind the mounting plate.
Carefully pull the outer cap over the sealing ring using
your fingers and stop briefly.
Removing the outer cap 3
Once you have pulled the outer cap over the sealing
ring, the outer cap can be completely pulled off the
knob.
Make sure that you pull the knob out straight. If not, you
risk ripping off the circuit board
[8] wAppLoxx Pro oval –installation instructions
Inserting the battery
Make sure that the battery (2) is placed on the white
battery flag. When inserting the battery, ensure the
polarity is correct (positive terminal facing antenna
circuit board).
Installing the outer cap
Screw the outer cap (1) back on by securing the
mounting plate using the opening key (e).
There is a marking on the outer cap that makes it easier
to position the outer cap correctly on the groove of the
knob.
When installing the outer cap, it is essential to ensure
that the orange O-ring lies flush between the mounting
plate and the knob.
[9] wAppLoxx Pro oval –installation instructions
Operating the wAppLoxx Pro Rokoko
Removing the outer knob 1
The entire outer knob (1+5+6) must be removed in order
to insert the wAppLoxx Pro into the lock from the inside.
Firstly, remove the outer cap (1)
Removing the electronic knob 1
After removing the outer cap, the electronic knob (5+6)
must be removed. After this, remove the PCB bracket (6)
from the basket (5) and remove the basket (5) from the
shaft including the mounting plate (4).
Installing the cylinder body
Once the outer knob has been removed, the cylinder
body (2) can be mounted in the lock.
[10] wAppLoxx Pro oval –installation instructions
Installing the basket
When the cylinder body has been installed in the lock,
secure the basket (5) to the shaft (7) using 6 screws.
During installation, make sure that the mounting plate
(4) between the basket (5) and the shaft is inserted in
the correct order.
In order to ensure that the cylinder is tight, it must be
ensured that sufficient screw glue is applied to the
electronic screws.
Installing the PCB bracket
Place the PCB bracket (6) in the basket (5) and secure
using two small electronic screws.
When inserting the bracket, ensure that the EMC
contact is not bent (see figure on the left).
Inserting the battery
Make sure that the battery (3s) is placed on the white
battery flag. When inserting the battery, ensure the
polarity is correct (positive terminal facing antenna
circuit board).
This manual suits for next models
3
Table of contents
Other Abus Door Lock manuals
