ABB REM 610 User manual
Motor Protection Relay
REM 610REM 610
Operator's Manual - ANSI version
3
Contents
Copyrights ................................................................................. 5
1. Introduction..............................................................7
1.1. This manual.............................................................. 7
1.2. Use of symbols ......................................................... 7
1.3. Intended audience ..................................................... 7
1.4. Product documentation ............................................... 8
1.5. Document conventions ............................................... 8
1.6. Document revisions.................................................... 9
2. Safety information...................................................11
3. Product overview ....................................................13
3.1. Use of the relay....................................................... 13
3.2. Features................................................................. 13
4. Operation ...............................................................15
4.1. HMI features ........................................................... 15
4.1.1. Front panel ................................................. 15
4.1.2. How to use the push buttons ......................... 15
4.1.3. Display....................................................... 16
4.1.3.1. Display test at power up ................. 16
4.1.3.2. Display modes .............................. 17
4.1.3.3. Display backlight ........................... 18
4.1.3.4. How to adjust the display contrast .... 18
4.1.4. Main menu ................................................. 18
4.1.5. Submenu.................................................... 19
4.1.6. HMI passwords ........................................... 19
4.1.7. SPA password............................................. 21
4.1.8. How to select language ................................ 21
4.1.9. How to set the real-time clock........................ 22
4.1.10. How to switch between front and rear
connection.................................................. 23
4.1.10.1. Target LED for front communication... 24
4.1.11. How to select the protocol for rear
communication ............................................ 24
4.2. HMI operation levels ................................................ 25
4.2.1. User level................................................... 25
4.2.1.1. Menu groups of the user level ......... 25
4.2.1.2. How to monitor measured values ..... 26
4.2.1.3. How to monitor recorded data ......... 28
4.2.1.4. INFO menu group.......................... 29
4.2.2. Technical level............................................. 30
4.2.2.1. Menu system of parameters ............ 30
4.2.2.2. How to change settings .................. 30
Motor Protection Relay
Operator's Manual - ANSI version
REM 610REM 610
1MRS755538
Issued: 01.04.2005
Version: B/31.01.2007
4.2.2.3. Configuration ................................ 34
4.2.2.4. How to acknowledge and reset
targets, output contacts and
memorized values ......................... 38
4.3. Protection relay targets ............................................. 38
4.3.1. Target LEDs................................................ 38
4.3.1.1. Green target LED .......................... 38
4.3.1.2. Yellow target LED.......................... 39
4.3.1.3. Red target LED ............................. 39
4.3.1.4. Programmable target LEDs ............. 40
4.3.2. Target messages ......................................... 40
4.3.2.1. Operation target messages ............. 40
4.3.2.2. Disturbance recorder target ............. 42
4.3.2.3. Self-supervision............................. 43
4.4. Detachable plug-in unit ............................................. 46
4.4.1. Identifying the product .................................. 46
4.4.2. Detaching and installing the plug-in unit........... 47
4.4.3. Inserting and changing the battery .................. 49
5. Commissioning and maintenance.............................51
5.1. Commissioning instructions ....................................... 51
5.2. Maintenance instructions........................................... 52
5.2.1. Relay verification ......................................... 53
5.2.2. Preventive parts replacement......................... 53
5.3. Measurements verification ......................................... 53
5.4. Function test ........................................................... 54
5.5. Digital input test....................................................... 55
5.6. Testing protection functions ....................................... 55
5.6.1. Testing of the short-circuit protection ............... 56
5.6.2. Testing of the ground-fault protection............... 56
6. Spare parts ............................................................57
6.1. Plug-in unit ............................................................. 57
6.2. Battery ................................................................... 57
7. Repair ....................................................................59
8. Ordering information ...............................................61
9. Abbreviations .........................................................63
4
REM 610REM 610 Motor Protection Relay
Operator's Manual - ANSI version
1MRS755538
5
Copyrights
The information in this document is subject to change without notice and should not
be construed as a commitment by ABB Oy. ABB Oy assumes no responsibility for
any errors that may appear in this document.
In no event shall ABB Oy be liable for direct, indirect, special, incidental or
consequential damages of any nature or kind arising from the use of this document,
nor shall ABB Oy be liable for incidental or consequential damages arising from
use of any software or hardware described in this document.
This document and parts thereof must not be reproduced or copied without written
permission from ABB Oy, and the contents thereof must not be imparted to a third
party nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license
and may be used, copied, or disclosed only in accordance with the terms of such
license.
© Copyright 2005 ABB. All rights reserved.
Trademarks
ABB is a registered trademark of ABB Group. All other brand or product names
mentioned in this document may be trademarks or registered trademarks of their
respective holders.
Warranty
Please inquire about the terms of warranty from your nearest ABB representative.
Motor Protection Relay
Operator's Manual - ANSI version
REM 610REM 610
1MRS755538
6
7
1. Introduction
1.1. This manual
This manual provides basic information on the protection relay REM 610 and
presents detailed instructions on how to use the human-machine interface (HMI) of
the relay. In addition to the instructive part, a short chapter on commissioning and
maintenance of the relay is included.
1.2. Use of symbols
This publication includes the following icons that point out safety-related conditions
or other important information:
The electrical warning icon indicates the presence of a hazard which
could result in electrical shock.
The warning icon indicates the presence of a hazard which could result
in personal injury.
The caution icon indicates important information or warning related to
the concept discussed in the text. It might indicate the presence of a
hazard which could result in corruption of software or damage to
equipment or property.
The information icon alerts the reader to relevant facts and conditions.
The tip icon indicates advice on, for example, how to design your
project or how to use a certain function.
Although warning hazards are related to personal injury, it should be understood
that operation of damaged equipment could, under certain operational conditions,
result in degraded process performance leading to personal injury or death.
Therefore, comply fully with all warning and caution notices.
1.3. Intended audience
This manual is intended for operators, supervisors and administrators to support
normal use of the product.
Motor Protection Relay
Operator's Manual - ANSI version
REM 610REM 610
1MRS755538
1.4. Product documentation
In addition to the relay and this manual, the delivery contains the following relay-
specific documentation:
Table 1.4.-1 REM 610 product documentation
Name Document ID
Installation Manual 1MRS752265-MUM
Technical Reference Manual 1MRS752263-MUM
Operator’s Manual 1MRS752264-MUM
1.5. Document conventions
The following conventions are used for the presentation of material:
*Push button navigation in the human-machine interface (HMI) menu structure is
presented by using the push button icons, for example:
To navigate between the options, use and .
*HMI menu paths are presented as follows:
Use the arrow buttons to select CONFIGURATION\COMMUNICATION\SPA
SETTINGS\PASSWORD SPA.
*Parameter names, menu names, relay target messages and relay's HMI views are
shown in a Courier font, for example:
Use the arrow buttons to monitor other measured values in the menus DEMAND
VALUES and HISTORY DATA.
*HMI messages are shown inside quotation marks when it is good to point out
them for the user, for example:
When you store a new password, the relay confirms the storage by flashing “--
-”once on the display.
8
REM 610REM 610 Motor Protection Relay
Operator's Manual - ANSI version
1MRS755538
9
1.6. Document revisions
Version IED
Revision
Date History
A B 25.11.2003 Document created. Modified for ANSI
compliance from the IEC version B.
B C 31.01.2007 Content updated
Motor Protection Relay
Operator's Manual - ANSI version
REM 610REM 610
1MRS755538
10
Other manuals for REM 610
9
Table of contents
Other ABB Other manuals
