ABB ACS350 Series User manual

ACS350 and ACS150

MUL1-R3 Installation Instructions

© 2005 ABB Oy. All Rights Reserved. 3AFE68620023 rev. B / 7.12.2005

1

2. Fasten the gland box frame to wall with four M4 screws (not

included).

2

1. Fasten the gland box frame to drive with two M4×12 screws.

4. If control cables or fieldbus option modules will be installed,

remove the detachable lid (4) from the gland box cover.

4

WARNING! Before installing MUL1-R3

option, read the safety instructions and

mechanical and electrical installation

instructions in the drive user’s manual.

Follow the instructions when installing,

operating and servicing the drive. If

ignored, physical injury or death may

follow, or damage may occur to the

drive, motor or driven equipment.

3. If using FPBA-01 or FCAN-01 option module, remove part

from gland box frame by bending it.

3

5. With any fieldbus option module except FRSA-00, install the

option grounding plate to the gland box frame. See Mechanical

installation in the drive manual.

5

ABB Oy AC Drives P.O. Box 184 FIN-00381 HELSINKI FINLAND Tel. +358 10 22 11, Fax: +358 10 22 22681, Internet: http://www.abb.com

10

11

10. Fasten the hood to drive with two M3×12 screws.

11. Fasten the hood to wall with one M4 screw (not included). 12. Drive with MUL1-R3 option installed.

9

9. Install the hood. First position the front edge carefully, then

press the hood downwards until it snaps on.

8

6. Install the clamp for the control cable, or if cables are run in

conduits, replace all clamps with suitable glands (not included).

Run cables through the clamps and tighten. Strip cable ends.

Fasten the grounding conductor (PE) of the input power cable

and the twisted shield of motor cable under the grounding

clamps. Connect the connectors to appropriate terminals. See

Electrical installation in the drive manual.

7

7. Install the gland box cover.

8. Fasten the cover with two M4×12 screws.

Clamp

Grounding

clamps

Other manuals for ACS350 Series

2

This manual suits for next models

1

Table of contents

Popular DC Drive manuals by other brands

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS user manual

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Technical description

Chamberlain Garog

Chamberlain Garog D Series operating manual

Parker

Parker PDS Series user guide

Festo

Festo DGC G Series Repair instructions

Binks

Binks QS-5012-1-CE Service manual

Danfoss

Danfoss VLT 2800 Series Quick setup

YASKAWA

YASKAWA CANopen SI-S3 Technical manual

GE

GE D20A6 instructions

Unex

Unex MC-D-250-1000-050W-TW operating manual

Geckodrive

Geckodrive G213V manual

Rockwell Automation

Rockwell Automation PowerFlex 700S Programming manual

WEG

WEG DeviceNet CFW500 user manual

Siemens

Siemens SINAMICS G List manual

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Operating instructions & installation instructions

SOMFY

SOMFY JR RU 30 instructions

Beckhoff

Beckhoff AX8911 Documentation

Minarik

Minarik MM300 Series user manual