Aaeon EPIC-8526 User manual
EPIC Board EPIC-8526
EPIC-8526
Intel®Embedded Pentium®M
and Celeron®M Processors
DDR 266 SODIMM up to 1GB
Up to 24-bit Dual-Channel
LVDS TFT LCD
6 USB 2.0 / 5 COMs
EPIC-8526 Manual Rev.A 1st Ed.
June 2008
EPIC Board EPIC-8526
i
Copyright Notice
This document is copyrighted, 2008. All rights are reserved. The
original manufacturer reserves the right to make improvements
to the products described in this manual at any time without
notice.
No part of this manual may be reproduced, copied, translated,
or transmitted in any form or by any means without the prior
written permission of the original manufacturer. Information
provided in this manual is intended to be accurate and reliable.
However, the original manufacturer assumes no responsibility
for its use, or for any infringements upon the rights of third
parties that may result from its use.
The material in this document is for product information only
and is subject to change without notice. While reasonable
efforts have been made in the preparation of this document to
assure its accuracy, AAEON assumes no liabilities resulting
from errors or omissions in this document, or from the use of the
information contained herein.
AAEON reserves the right to make changes in the product
design without notice to its users.
EPIC Board EPIC-8526
ii
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
Award is a trademark of Award Software International, Inc.
CompactFlash™ is a trademark of the Compact Flash
Association.
Intel®, Pentium®M and Celeron®M are trademarks of Intel®
Corporation.
Microsoft Windows®is a registered trademark of Microsoft Corp.
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
All other product names or trademarks are properties of their
respective owners.
EPIC Board EPIC-8526
iii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 9657666600 Jumper Cap
• 1 9681945600 Cable Kit for EPIC-8526
• 1 Cooler (for EPIC-8526-A10-02)
• 1 EPIC-8526 CPU Board
• 1 Quick Installation Guide
• 1 CD-ROM for manual (in PDF format) and drivers
If any of these items should be missing or damaged, please
contact your distributor or sales representative immediately.
EPIC Board EPIC-8526
iv
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Features....................................................................1-3
1.3 Specifications............................................................1-4
Chapter 2 Quick Installation Guide
2.1 Safety Precautions....................................................2-2
2.2 Location of Connectors and Jumpers .......................2-3
2.3 Mechanical Drawing..................................................2-5
2.4 List of Jumpers..........................................................2-7
2.5 List of Connectors .....................................................2-8
2.6 Setting Jumpers ........................................................2-10
2.7 LVDS Operating Voltage Selection (JP1) .................2-11
2.8 Clear CMOS (JP4) ....................................................2-11
2.9 COM2 Ring/ +5V/ +12V Selection (JP14).................2-11
2.10 AT Simulates ATX (JP17).......................................2-11
2.11 LCD Inverter Power Selection (JP19).....................2-11
2.12 COM1/2 Connectors (CN5).....................................2-12
2.13 AT Power Connector (CN6)....................................2-12
2.14 LVDS Connector (CN9)...........................................2-12
2.15 Keyboard/ Mouse Connector (CN10)......................2-13
2.16 IrDA Connector (CN11)...........................................2-13
2.17 COM3 and COM4 Connectors (CN12, CN13)........2-14
EPIC Board EPIC-8526
v
2.18 Fan Connector (CN14)............................................2-14
2.19 TV-out Connector (CN15) .......................................2-14
2.20 LCD Inverter Power Connector (CN16) ..................2-14
2.21 COM5/ GPS Connector (CN17)..............................2-15
2.22 Audio Connector (Line-in) (CN18)...........................2-15
2.23 Front Panel Connector (CN19) ...............................2-15
2.24 Power Output Connector (CN20)............................2-16
2.25 USB5 & USB6 Connectors (USB1).........................2-16
2.26 Primary EIDE Connector (IDE1) .............................2-16
2.27 LPT Port Connector (LPT1) ....................................2-17
Chapter 3 Award BIOS Setup
3.1 System Test and Initialization. ..................................3-2
3.2 Award BIOS Setup....................................................3-3
Chapter 4 Driver Installation
4.1 Installation.................................................................4-3
Appendix A Programming The Watchdog Timer
A.1 Programming .........................................................A-2
A.2 IT8712 Watchdog Timer Initial Program................A-6
Appendix B I/O Information
B.1 I/O Address Map....................................................B-2
B.2 1st Memory Address Map.......................................B-3
B.3 IRQ Mapping Chart................................................B-4
B.4 DMA Channel Assignments...................................B-4
EPIC Board EPIC-8526
vi
Appendix C Mating Connector
C.1 List of Mating Connectors and Cables.................. C-2
EPIC Board EPIC-8526
Chapter 1 General Information 1- 1
General
Chapter
1
Information
EPIC Board EPIC-8526
Chapter 1 General Information 1- 2
1.1 Introduction
AAEON announces a brand new EPIC Express Board-EPIC-8526,
designed to fit in diverse applications that demand for fitting in
different space limitations and high performance.
EPIC-8256 supports socket 478-based Intel Pentium M processor
and onboard Pentium M/ Celeron M processor up to 2.0GHz with
the Front Side Bus 400MHz. The system memory of EPIC-8526 is
200-pin DDR SODIMM and is up to 1GB. Moreover, the chipset of
EPIC-8526 is Intel 852GM + ICH4.
For the network connection, EPIC-8526 deploys Realtek 8100C
10/100Base-TX chip and features two RJ-45 ports to display the
transcendent performance or you may choose optional RTL 8110S
chip features Gigabit LAN for a faster network connection. The
display chipset of EPIC-8526 is Intel 852GM integrated Graphics to
support CRT/LCD, and CRT/DVI simultaneous/ dual view displays.
In addition, EPIC-8526 accommodates a PC/104+ socket for further
expansion and also features one EIDE, one Type II CompactFlash
for storage. The rich I/O makes EPIC-8526 a great solution for
flexible I/O expansion: six USB 2.0 ports, five COM ports, and
optional IrDA header to be integrated to your systems.
EPIC Board EPIC-8526
Chapter 1 General Information 1- 3
1.2 Features
Intel Embedded Pentium M/ Celeron M Processors Up to
2.0GHz
SODIMM DDR 266 Max. 1GB
Up to 24-bit Dual-channel LVDS TFT Panel
Multi-Display: CRT, TV-out, LVDS and DVI
Dual 10/100Base-TX Ethernet (Optional Gigabit LAN)
AC97 2.0 Codec 2 CH Audio
PC/104+ Socket Expansion
Table of contents
Other Aaeon Computer Hardware manuals
Aaeon
Aaeon EMB-A50M User manual
Aaeon
Aaeon UP Squared Pro User manual
Aaeon
Aaeon GENE-6310 User manual
Aaeon
Aaeon PFM-336I User manual
Aaeon
Aaeon PER-C41L User manual
Aaeon
Aaeon GENE-APL5 User manual
Aaeon
Aaeon SBC-657B User manual
Aaeon
Aaeon SBC-775 User manual
Aaeon
Aaeon SBC-456 User manual
Aaeon
Aaeon NanoCOM-WHU User manual
Aaeon
Aaeon SBC-551 User manual
Aaeon
Aaeon HSB-800I User manual
Aaeon
Aaeon SBC-598 User manual
Aaeon
Aaeon PCM-9150 User manual
Aaeon
Aaeon AEC-6638 User manual
Aaeon
Aaeon HSB-810A User manual
Aaeon
Aaeon PCM-5335 User manual
Aaeon
Aaeon SBC-860 User manual
Aaeon
Aaeon PCM-8150 User manual
Aaeon
Aaeon GENE-U15B User manual
Popular Computer Hardware manuals by other brands
EMC2
EMC2 VNX Series Hardware Information Guide
Panasonic
Panasonic DV0PM20105 Operation manual
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 user manual
Gigabyte
Gigabyte B660M DS3H AX DDR4 user manual
Raidon
Raidon iT2300 Quick installation guide
National Instruments
National Instruments PXI-8186 user manual
