Aaeon SBC-556/L User manual

SBC-556/L

Half-size CPU Card with

LCD, Ethernet, & SSD

FCC STATEMENT

THISDEVICECOMPLIESWITHPART15FCCRULES.OPERA-

TIONISSUBJECTTOTHEFOLLOWINGTWOCONDITIONS:

(1)THISDEVICEMAYNOTCAUSEHARMFULINTERFER-

ENCE.(2)THISDEVICEMUSTACCEPTANYINTERFERENCE

RECEIVED,INCLUDINGINTERFERENCETHATMAYCAUSE

UNDESIREDOPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO

COMPLY WITH THE LIMITS FOR A CLASS"A" DIGITAL

DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE REASON-

ABLE PROTECTION AGAINST HARMFUL INTERFERENCE

WHEN THE EQUIPMENT IS OPERATED IN A COMMER-

CIAL ENVIRONMENT. THIS EQUIPMENT GENERATES,

USES, AND CAN RADIATE RADIO FREQUENCY ENERGY

AND, IFNOTINSTALLEDANDUSED IN ACCORDANCE

WITH THE INSTRUCTION MANUAL, MAY CAUSE

HARMFUL INTERFERENCE TO RADIO COMMUNICA-

TIONS.OPERATION OF THIS EQUIPMENT IN A RESIDEN-

TIALAREA IS LIKELY TO CAUSE HARMFUL INTERFER-

ENCE IN WHICH CASE THE USER WILL BE REQUIRED

TOCORRECT THE INTERFERENCE AT HIS OWN EX-

PENSE.

This document is copyrighted, 1999, by AAEON Technology Inc.

All rights are reserved. AAEON Technology Inc. reserves the right

to make improvements to the products described in this manual at

any time without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of AAEON Technology Inc. Information provided in

this manual is intended to be accurate and reliable. However,

AAEON Technology Inc. assumes no responsibility for its use, nor

for any infringements upon the rights of third parties which may

result from its use.

Acknowledgements

ALI is a trademark of Acer Laboratories, Inc.

AMD is a trademark of Advanced Micro Devices, Inc.

Award BIOS is a trademark of Award Software International, Inc.

AutoCAD and AutoShade are trademarks of Autodesk, Inc.

CHIPS Logotype is a registered trademark; Chips 69000 is a

trademark of Chips and Technologies, Inc.

Cyrixisatrademark of Cyrix Corporation.

IBM, PC/AT, PS/2 and VGA are trademarks of International

Business Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Lotus, 1-2-3 and Symphony are trademarks of Lotus Development

Corp.

Microsoft Windows®, MS-DOS, Corporation Windows and

Microsoft are registered trademarks of Microsoft Corp.

SiS is a trademark of Silicon Integrated System Corp.

SMC is a trademark of Standard Microsystems Corporation.

TurboDLD Classic is a trademark of Panacea Inc.

UMC is a trademark of United Microelectronics Corporation.

WordPerfect is a trademark of WordPerfect Corporation.

VESA®is a registered trademark of Video Electronics Standards

Association.

All other product names or trademarks are properties of their

respective owners.

Part No. 2047556003 SBC-556/L A1.4 4th Edition

Printed in Taiwan April 2000

Packing list

Before you begin installing your card, please make sure that the

following materials have been shipped:

• 1SBC-556/LCPUcard

• 1Quick Installation Guide

• 1 6-pin mini-DIN dual outlet adapter for keyboard and PS/2

mouse

• 1Hard disk drive (IDE) interface cable (40-pin)

• 1 Floppy disk drive interface cable (34-pin)

• 1 Parallel port adapter (26-pin) and dual outlet adapter. (one for

Rs-232,anotherone for RS-422/485)

• 1CD-ROMUtilities

• 4Utility disks with CHIPS 69000utility programs and drivers

If any of these items are missing or damaged, contact your distribu-

tor or sales representative immediately.

Notice

DearCustomer,

Thank you for purchasing the SBC-556/L board. The user

manual is designed to help you to get the most out of the SBC-556/

L, please read it thoroughly before you install and use the board.

The product that you have purchased comes with a two years

warranty, but AAEON cannot be responsible for misuse of the

product. Therefore, we strongly urge that the first read the manual

before using the product.

To receive the lastest version of the user manual, please visit our

Web site at: Taiwan: www.aaeon.com.tw

U.S.A : www.aaeon.com

Contents

Chapter 1: General Information .......................1

Introduction ........................................................................... 2

Features.................................................................................. 3

Specifications ......................................................................... 4

Board layout........................................................................... 6

Card dimensions.................................................................... 7

Chapter 2: Installation .......................................9

Jumpers and connectors.................................................... 10

Locating jumpers and connectors .................................... 12

Setting jumpers ................................................................... 13

Safety precautions ............................................................... 14

Installing the CPU............................................................... 14

CPU clock ratio (JP1)......................................................... 16

DRAM voltage setting (JP2) ........................................... 17

RS-232/422/485 select (COM2)(JP3).............................. 18

CPU VIO voltage setting (JP4) ........................................ 19

IR connector (Reserved)(JP5) ......................................... 20

CPU external clock select (JP6) ...................................... 21

CPU Vcore voltage select (JP7)....................................... 23

DOC address select (JP8)................................................. 25

Ethernet active/link signal LED (JP9)(JP10)(JP11) ..... 26

Clear CMOS data (JP12)................................................... 27

LCD inverter connector (CN1) ........................................ 28

Power LED and keylock connector (CN2) ..................... 29

IDE LED connector (CN3)................................................ 30

Hardware reset connector (CN4)..................................... 31

IDE hard drive connector (CN5) ...................................... 32

Fan power connector (CN6) .............................................. 34

Floppy drive connector (CN7) .......................................... 35

Parallel (Printer) port connector (CN8)........................... 37

Display connectors (CN9, CN15) ..................................... 38

Serial ports connectors (CN10, CN14)............................ 41

USB connectors (dual-port) (CN11)................................. 42

Ethernet connector (CN12)............................................... 43

Power connectors (P8 & P9)(CN13)................................ 44

KB & PS/2 Mouse connector (CN17) ............................. 45

DiskOnChip socket ............................................................ 47

Chapter 3: Award BIOS Setup ..........................49

System test and initialization ............................................. 50

Systemconfigurationverification ............................................50

AWARD BIOS setup........................................................... 51

Entering setup..........................................................................51

Standard CMOS setup ....................................................... 52

BIOS festures setup ........................................................... 53

Virus Warning..........................................................................54

Chipset features setup ....................................................... 56

Power management setup.................................................. 58

PM timers................................................................................60

PM Events...............................................................................61

PnP/PCI Configuration setup ............................................ 62

Load BIOS DEFAULT / LOAD SETUP DEFAULTS ... 65

Integrated Peripherals ....................................................... 66

Supervisor/User Password setting ................................... 70

Auto detect hard disk......................................................... 72

HDD low level format......................................................... 73

Save & exit setup................................................................ 74

Exit without saving ............................................................. 75

Chpater 4: Flat Panel/CRT Controller Display

Drivers and Utilities ......................77

Software drivers .................................................................. 78

Hardware configuration ..........................................................78

Necessary prerequisites ..........................................................79

Before you begin .....................................................................79

Windows 9595

9595

95 ..............................................................................................................................................

..............................................................................................................................................

....................................................................... 80

Windows 3.13.1

3.13.1

3.1............................................................................................................................................

............................................................................................................................................

...................................................................... 88

OS/2....................................................................................... 89

Windows ΝΤ3.51ΝΤ3.51

ΝΤ3.51ΝΤ3.51

ΝΤ3.51............................................................................................................................

............................................................................................................................

.............................................................. 91

Windows NT4.0.................................................................. 92

Chapter 5: Ethernet Software Configuration...

.........................................................93

Ethernet software configuration ....................................... 94

Appendix A: Programming the Watchdog

Timer.............................................. 95

Programming the watchdog timer .................................... 96

How to program the WATCHDOG TIMER...........................96

Demo program ........................................................................97

Appendix B: Installing PC/104 Modules ..........99

Installing PC/104 modules...............................................100

Chapter 1 General Information 1

General

Information

This chapter provides background

informationfor the SBC-556/L.

Sections include:

• Card specifications

• Board layout

CHAPTER

2SBC-556/L User Manual

Introduction

The SBC-556/L is an all-in-one single board Pentium computer card.

With an onboardflatpanel/CRTSVGAcontroller, the SBC-556/L

packs all the functions of an industrial computer and its display

capabilities onto a single, half-size card. This means the SBC-556/L is

your absolute best solution for embedded applications.

The onboard PCI-bus, flat panel/CRT SVGA controller uses the CHIPS

69000 chipset with 2 MB of SDRAM built in chip. This chipset, used

with local PCI-bus, is a 64-bit graphics engine. Excellent for display-

intensive applications, this card supports various LCD types, includ-

ingTFT, DSTN, MONO, andEL.

Another feature of the SBC-556/L is the inclusion of a high speed,

local bus IDE controller. This controller supports (through ATA PIO)

mode 3 and mode 4 hard disks, and Ultra DMA/33, enabling data

transfer rates up to 33 MB/second. Up to two IDE devices can be

connected, including large hard disks, CD-ROM drives, tape backup

drives, or other IDE devices.

Onboard features include two high-speed RS-232 serial ports with

16C550UARTs, one bidirectional SPP/EPP/ECP parallel port, and one

floppy drive controller. In addition, the SBC-556/L includes an extra

512 KB of second level on-board cache memory.

If program execution is halted by a program bug or EMI, the board's

watchdog timer can automatically reset the CPU or generate an

interrupt. This ensures reliability in unmanned or stand alone systems.

The SBC-556/L supports 5V EDO DRAM. It also provides two 72-pin

SIMM (Single In-line Memory Module) sockets for its onboard

system DRAM. These sockets give you the flexibility to configure

your system from 8 MB to 128 MB of DRAM using the most

economical combination of SIMMs.

Table of contents

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual