ZyXEL Communications BPS-120 Manual

BPS-120

Support Notes

Version 1.00.01

Nov 2004

VSG-1200 Support Notes

INDEX

Application Note...........................................................................................................3

What kinds of the scenarios the BPS connect?......................................................3

How does the BPS work? ......................................................................................3

How to install the BPS? .........................................................................................4

What is the power connector definition? ...............................................................4

BPS-120 FAQ................................................................................................................4

What is persist time of BPS? .................................................................................4

When the BPS works? ...........................................................................................5

When does the BPS turn off the power after BPS provides the power to device? 5

How many backup power supply control status? ..................................................5

What is the max 12V power output when BPS provides power to unit?...............5

VSG-1200 Support Notes

Application Note.

What kinds of the scenarios the BPS connect?

The one-to-many scenario is shown the following.

Redundancy Power Cable

GS-3012F

GS-3012

BPS-120

Redundancy Power Cable

GS-3012F

GS-3012

BPS-120

The one-to-one scenario is shown the following

Redundant

ower cable

The one-to-one scenario of backup power function is guaranteed. Because when one

device power fails, the BPS can support this device immediately. In one-to-many

scenario, the BPS cannot support the two fail devices at the same time. The backup

power function is not guaranteed.

How does the BPS work?

The ZyXEL BPS-120 is designed to connect up to 6 external networking devices.

When one of the internal devices powers down, the BPS turns on the power quickly

and avoid the system reboot.

VSG-1200 Support Notes

How to install the BPS?

The installation way BPS is very easy. You just use the “Redundant power cable” plug

the ZyXEL Management Switches which support backup power between BPS. Then

power on the BPS. The backup power environment is finished.

What is the power connector definition?

The connector type is shown below

Pin Number Designation

1 GND

2 N/A

3 12V

4 12V

5 12V

6 12V

7 GND

8 GND

9 N/A

10 BPS_PRES (BPS present)

11 BPS_CTRL_0

12 BPS_CTRL 1

13 PWR_GOOD (Power is good)

14 GND

BPS-120 FAQ.

What is persist time of BPS?

The persist time is 60 ns.

VSG-1200 Support Notes

When the BPS works?

When the device power is lower then 10V, the BPS start to provide external power to

device.

When does the BPS turn off the power after BPS provides the

power to device?

1. Remote device disconnected from BPS port.

2. Over temperature around the per-port MOSFET. When the temperature goes down,

the BPS may turn on the power to the device again.

3. Remote device power plug-in.

4. BPS output voltage drops to below 10 volts for more than 40ms.

How many backup power supply control status?

There are four status for the BSP.

1. BPS inactive, power off.

2. BPS active, not providing power to the unit.

3. BPS active, providing power to the unit.

4. BPS active, power not available to the port.

What is the max 12V power output when BPS provides power

to unit?

The max power is 120 Watt.

Other manuals for BPS-120

Table of contents

Other ZyXEL Communications Switch manuals

ZyXEL Communications

ZyXEL Communications GS1900 Series User manual

ZyXEL Communications

ZyXEL Communications MES-3728 User manual

ZyXEL Communications

ZyXEL Communications GS1350 Series User manual

ZyXEL Communications

ZyXEL Communications MGS-3712 User manual

ZyXEL Communications

ZyXEL Communications GS1100 Series User manual

ZyXEL Communications

ZyXEL Communications PMG5318-B20A User manual

ZyXEL Communications

ZyXEL Communications GS-2750 User manual

ZyXEL Communications

ZyXEL Communications ExtraSmart ES-1552 User manual

ZyXEL Communications

ZyXEL Communications GS1100 Series User manual

ZyXEL Communications

ZyXEL Communications GS-105B User manual

ZyXEL Communications

ZyXEL Communications XS3800-28 User manual

ZyXEL Communications

ZyXEL Communications ES-2048 User manual

ZyXEL Communications

ZyXEL Communications MGS3750-28F User manual

ZyXEL Communications

ZyXEL Communications XMG1930-30 User manual

ZyXEL Communications

ZyXEL Communications GS2200 Series User manual

ZyXEL Communications

ZyXEL Communications XGS3600 Series User manual

ZyXEL Communications

ZyXEL Communications GS1300 Series User manual

ZyXEL Communications

ZyXEL Communications PLA-470 - V3.0.5 User manual

ZyXEL Communications

ZyXEL Communications GS1920 Series User manual

ZyXEL Communications

ZyXEL Communications Dimension ES-3024 User manual

ZyXEL Communications

ZyXEL Communications XS3800-28 User manual

ZyXEL Communications

ZyXEL Communications Dimension GS-2024 User manual

ZyXEL Communications

ZyXEL Communications DIMENSION ES-1016A User manual

ZyXEL Communications

ZyXEL Communications PMG5318-B20B User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual