ZyXEL Communications LTE5121 User manual

www.zyxel.com

LTE5121

LTE IAD

Version 1.00

Edition 1, 07/2013

Default Login Details

LAN IP Address http://192.168.1.1

User Name admin

Password 1234

Quick Start Guide

Device Panels

Front Panel LEDs

PHONE1,2SIGNALSTRENGTH

LTE/3G INTERNET

ETHERNET1‐4

POWER

WLAN

ON/OFF

RESET

POWER

ETHERNET

PORT1‐4

PHONE

PORT1,2

SIM

SLOT

USB

PORT BUTTON

Side and Back Panels

BUTTON

ON/OFF

BUTTON

WLAN

BUTTON

WPS

SOCKET

Requirements

Make sure you have the following before you start:

•INTERNET ACCESS: You need a SIM card from an LTE or 3G ISP

(Internet Service Provider). You may also need a PIN code, APN, or

IP address to use the SIM card.

•VoIP ACCOUNT: To make phone calls over the Internet, you need

the account information provided by your VoIP service provider (the

company that lets you make phone calls over the Internet).

•WEB BROWSER: Internet Explorer 6.0 and later versions, with

JavaScript enabled, or Mozilla Firefox 3 and later versions, or Safari

2.0 and later versions. The browser will be used to access the

Internet and/or access the LTE5121’s Web Configurator.

Hardware Connections

1. SIM CARD: Insert your SIM card in the side panel slot.

2. USB 2.0: (See following figure.) Connect a USB storage drive or

printer to share through the network. Use a USB cable (not provided)

if needed.

3. ETHERNET: For a wired connection to the LTE5121, use an Ethernet

cable to connect a computer to one of these ports for initial

configuration and/or Internet access.

ONNECTION

4. PHONE: To make calls over the Internet, use a telephone cable (and

any telephone adaptor provided with your LTE5121) to connect a

telephone to the PHONE 1 or PHONE 2 port. If you only have one

telephone, use PHONE 1.

5. POWER: Use the power adaptor provided with your LTE5121 to

connect an appropriate power source to this socket.

6. POWER: Push the side-panel POWER button to the ON position.

234

Look at the LEDs (lights) on the LTE5121 front panel:

• The POWER light blinks during start-up and stays on once the

LTE5121 is ready.

• The ETHERNET light turns on if the corresponding ETHERNET port

is properly connected and it blinks when there is traffic.

• The WLAN light stays on and green when the wireless LAN is ready.

The light will not turn on if the wireless connection is not activated. It

is blue when WPS configured.

• The LTE/3G light blinks while the LTE5121 is initializes the LTE

connection and stays on after the LTE connection is ready.

• The SIGNAL STRENGTH lights display the LTE connection’s signal

quality. More bars means a better signal.

• The INTERNET light is green when Internet access is available. It

blinks when transmitting data.

• The PHONE lights stay on when your SIP account is registered and

blink if the receiver is off the hook.

If the POWER light does not turn on during start up, turn the LTE5121 off, check

the connections, wait a few seconds and then turn it back on. If the problem

persists, you may have a hardware problem and you need to contact your vendor.

ONNECTION

Set Up a Wireless Connection

The LTE5121’s wireless LAN is enabled by default. Use the wireless

SSID (network name) and encryption key on the back panel to manually

add a wireless client to the network. Refer to the User’s Guide if you

wish to use WPS (Wi-Fi Protected Setup) instead.

1. Right-click the wireless adapter icon in the bottom right of your

computer monitor. Click View Available Wireless Networks.

2. Select the LTE5121’s SSID name and click Connect (A). The SSID

“SecureWirelessNetwork” is given here as an example.

SSID: SecureWirelessNetwork

WPA2-PSK: 7WC3R7TVKWK3R

3. When prompted for a password, enter the (WPA2-PSK) encryption

key from the back panel of the LTE5121 and click Connect.

4. You may have to wait several moments while your computer connects

to the wireless network.

5. You should now be securely connected wirelessly to the LTE5121.

If you cannot connect wirelessly to the LTE5121, check that you selected the

correct SSID and entered the correct security key. Make sure the LTE5121’s

physical WLAN ON/OFF button is set to ON and the WLAN LED is on.

ONNECTION

Connect to the Internet

1. Open your browser and go to http://192.168.1.1.

• If your service provider’s LTE login page appears instead of

your default Home page then all you need to do is enter the

screen instructions. The LTE5121 should then automatically

update itself with the settings that you need to connect to

the Internet.

• If your service provider’s LTE login page does not appear, do

the following:

2. Enter the default username “admin” and password “1234”. Click

If the login screen does not open, make sure you allow web browser pop-up

windows, JavaScript and Java permissions. Your computer should also be

set to get an IP address automatically from a DHCP server. See your User’s

Guide for more information.

3. If the INTERNET light is off, manually configure the Internet

connection. Click Network Setting > Broadband. If the APN

(Access Point Name) is not the same as what you were given, click

the LTE connection’s Edit icon.

1010

The APN identifies the LTE network to which your LTE Modem connects.

4. Change the APN, IP address and DNS server settings if necessary.

Click Apply.

5. If a PIN code is required, click Network Setting > Broadband > SIM.

Enter it and click Apply.

Other manuals for LTE5121

Table of contents

Other ZyXEL Communications Gateway manuals

ZyXEL Communications

ZyXEL Communications P-660HW-Tx v3 Series User manual

ZyXEL Communications

ZyXEL Communications VSG-1200 User manual

ZyXEL Communications

ZyXEL Communications ZyWALL USG 2000 Manual

ZyXEL Communications

ZyXEL Communications P-660HN series User manual

ZyXEL Communications

ZyXEL Communications P-662H Series User manual

ZyXEL Communications

ZyXEL Communications ZyXEL Prestige 660R User manual

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL 35 User manual

ZyXEL Communications

ZyXEL Communications Prestige 653HWI series User manual

ZyXEL Communications

ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 User manual

ZyXEL Communications

ZyXEL Communications ZYWALL USG 200 UNIFIED User manual

ZyXEL Communications

ZyXEL Communications P-792H v2 User manual

ZyXEL Communications

ZyXEL Communications P-870HN-5xb User manual

ZyXEL Communications

ZyXEL Communications P-2302R-P1 Series Manual

ZyXEL Communications

ZyXEL Communications ZyWALL USG 100 Plus User manual

ZyXEL Communications

ZyXEL Communications P-870HN-5xb Manual

ZyXEL Communications

ZyXEL Communications P-660HN-F1A User manual

ZyXEL Communications

ZyXEL Communications UAG Series Instruction Manual

ZyXEL Communications

ZyXEL Communications ZyWALL USG 2000 User manual

ZyXEL Communications

ZyXEL Communications ZyWALL USG 50 User manual

ZyXEL Communications

ZyXEL Communications P-660HW-DX User manual

ZyXEL Communications

ZyXEL Communications P870HNU-51B User manual

ZyXEL Communications

ZyXEL Communications P-660HW-Tx v3 Series User manual

ZyXEL Communications

ZyXEL Communications C4000LZ User manual

ZyXEL Communications

ZyXEL Communications ZyXEL Prestige 310 User manual

Popular Gateway manuals by other brands

LST

LST M500RFE-AS Specification sheet

Kinnex

Kinnex Media Gateway quick start guide

2N Telekomunikace

2N Telekomunikace 2N StarGate user manual

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Original instructions

Telsey

Telsey CPVA 500 - SIP Technical manual

RTA

RTA 460A-NNA4 Product user guide

Shaw

Shaw Gateway HDPVR user manual

ABB

ABB VSN900 Commissioning manual

Commander

Commander Pulse owner's manual

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E manual

NETGEAR

NETGEAR C6300BD installation guide

Amit

Amit CDW531AM user guide

HMS

HMS Netbiter EasyConnect EC150 user manual

Huawei

Huawei EchoLife HG620 user guide

AT&T

AT&T U-verse 3801 Replacement self-installation guide

Logic IO

Logic IO RTCU MX2 turbo Technical manual

Suttle

Suttle MediaMAX MXM-521 installation instructions

RTA

RTA 460MCBC-N2E Product user guide