Zte Centinel MF275/9 User manual

Popular Wireless Router manuals by other brands

Milesight

Milesight UG67 user guide

Airlogic

Airlogic AirSync Class 1 Features

Samsung

Samsung WCH730B user manual

TELEFONICA

TELEFONICA USB Adapter quick start guide

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series quick start

Askey

Askey RAC2V1K user manual

Alloy

Alloy WLF2454AP-S user guide

TP-Link

TP-Link TL-WR542G user guide

NETGEAR

NETGEAR WNR2000v4 user manual

Hama

Hama 53120 Operating instruction

Intellinet

Intellinet 524582 user manual

Asus

Asus RT-N10P user guide

D-Link

D-Link DIR-506L Quick installation guide

Sapido

Sapido GR297n user manual

Asus

Asus DSL-N55U user guide

AMTC

AMTC WR7502 user guide

Compaq

Compaq CP-2W - iPAQ Connection Point manual

SMC Networks

SMC Networks WBR14-N2 FICHE user guide

1

MODEM ROUUUUUUUUUuTER MF275/9

RER 4G WIFI

Guia Rapida

2

No part of this publication may be excerpted, reproduced,

translated or utilized in any form or by any means,

electronic or mechanical, including photocopying and

microlm, without the prior written permission of ZTE

Corporation.

The manual is published by ZTE Corporation. We reserve

the right to make modications on print errors or update

specications without prior notice.

3

Getting to Know Your Device

The device operates on the 4G/LTE networks and supports

voice and data service.

Appearance

4

1. micro-SIM card slot Insert your micro-SIM Card.

2. Reset button Reset your device.

3. External antenna

connector To attach antenna.

4. WPS button To activate the WPS Function.

5. Phone Standard RJ11 connector for the

telephone

6. LAN Ethernet connector to computer

7. Power socket Connector to the external power

supply

8. Power key Turn your device on or off.

9. Indicators Indicate the status of your device.

Indicators

Indicator State Description

Power Green steady AC power present

Off No AC power

Voicemail Green

blinking New voicemail waiting

Off No new voicemail

5

Battery

Green steady More than 50% discharging

(charger not present)

Green

blinking

More than 50% charging

(charger present)

Yellow steady 20%-50% discharging

(charger not present)

Yellow

blinking

20%-50% charging (charger

present)

Red steady

Less than 20%

discharging(charger not

present)

Red blinking Less than 20% charging

(charger present)

Off Battery not present

Wi-Fi

Green steady Wi-Fi on

Blinking Active data connection or

FOTA

Off Wi-Fi off

6

Network

Green steady Connected to the LTE

network

Green

blinking Roaming (LTE network)

Yellow steady Connected to the 4G

network

Yellow

blinking Roaming(4G network)

Red steady

No service, limited service,

searching for network, no

SIM Card or other abnormal

status

Signal

Strength

Green steady Strong signal

Yellow steady Weak signal

Red steady No service, limited service,

or searching for signal

7

Installation Guide

Installing the micro-SIM Card and battery

1. Slide the back cover and remove it

2. Insert the battery.

8

3. Install the micro-SIM Card.

WARNING!

• Switch off your device before installing or replacing the

micro-SIM card. Your device does not support placing

or inserting the micro-SIM Card while switched to the

ON position.

• Your device only supports micro-SIM Card. To avoid

damaging the device, please use the card that comes

installed or included in the box of the device.

9

Before You Begin

You can charge your device by using an adapter:

• Insert the charger lead carefully with the plug arrow

facing the bottom of the device.

• Do not use excessive force to insert the plug.

• Make sure the plug is facing the right way, and lined up

correctly. Insert it gently.

Connecting Your Device

Please refer to the following diagram for connecting your

computer and land line phone. If you want to use the

mobile network to connect to the Internet or use your land

line phone, you need to insert your micro-SIM Card rst.

10

Switching On Your Device

1. Press and hold the Power Switch to get started. Make

sure that the phone is on the hook before you power it

on.

2. Wait 1 ~ 2 minutes and then the Power and battery

indicator should be lit on.

Connecting to the Internet

Via Ethernet

1. Connect the Ethernet cable to the LAN port and your

computer.