Zte ZXV10 W615 User manual
ZXV10 W615
Outdoor Wireless Access Point
User Manual
Verson: V3.0
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: (86) 755 26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright © 2010 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on print
errors or update specifications without prior notice.
Version No. : RVerson: V3.0
Edition Time : 2012-08-20(R1.0)
Manual No. : SJ-20120820095015-001
Confidential and Proprietary Information of ZTE CORPORATION 1
C h a p t e r 1
Product Introduction
ProductOverview
The ZTE ZXV10 W615 broadband wireless access product operates at 2.4
GHz, 5.2 GHz and 5.8 GHz frequency bands and complies with IEEE 802.11a,
802.11b, 802.11g, and 802.11n protocols. The device adopts the Orthogonal
Frequency Division Multiplexing (OFDM) technology. Featuring a
transmission speed of up to 300 Mbps, high receiving sensitivity, and long
transmission distance, it provides a powerful wireless access solution for
telecommunication operators, Internet Service Provider (ISP) and other
enterprises.
By supporting multiple encryption mechanisms and authority management
functions, the ZXV10 W615 provides a highly secure system for Wireless
Local Area Network (WLAN).
By supporting Power over Ethernet (PoE), ZXV10 W615 acquires convenient
power supply.
TypicalApplication
The device is typically used in the following scenarios:
•Small and medium-sized enterprises
To realize wireless coverage and meet mobile office requirements.
•Remote access to the company network.
To receive and send E-mails, transmit files, emulate terminals, and others.
The device supports various wireless network connection modes, such as
point-to-point connection, single access point connection, multiple access
point connection, and roaming. It can apply to various application
environments, such as connection within an Intranet and between different
networks.
•An environment where it is difficult to establish a connection through
network cables
To be used in places where cabling is difficult, such as an old building and
ZXV10 W615 User Manual
2 Confidential and Proprietary Information of ZTE CORPORATION
an asbestos building structure.
•Mobile office system
To be used by retailers, manufacturers and in the working site which needs
to be changed frequently.
•Temporary LAN establishment for a special project
To be used when a LAN needs to be established temporarily in places such
as commercial exhibitions, exhibition halls and construction sites; when the
capacity needs to be expanded during peak hours in places such as retailing
shops, airports and airlines; or when the financial auditor needs to establish
a client work group.
•Access to the database by mobile workers
To enable doctors, nurses and retailers to share information through mobile
access to the database.
•Family office users
To meet the requirement for installing a small computer network easily and
quickly.
InterfaceandButtonDescription
For a description of the interfaces and buttons of the ZXV10 W615, refer to
the following table:
Name Description
Ethernet LAN interface/PoE (supports 10/100/1000 Mbps), connected by an
RJ-45 network cable.
2.4G-A 2.4G antenna interface, used to connect an antenna.
2.4G-B 2.4G antenna interface, used to connect an antenna.
5G-A 5G antenna interface, used to connect an antenna.
5G-B 5G antenna interface, used to connect an antenna.
WAN/PoE RJ-45 interface, used for uplink connection and supplying power.
GND Grounding terminal.
TechnicalSpecifications
Physical Specification
•Size: 210 mm×210 mm×69 mm (Length × Width × Height)
•Weight: 4 kg
Electric Parameters
•Power supply: 802.3at PoE+
ZXV10 W615 User Manual
Confidential and Proprietary Information of ZTE CORPORATION 3
•Voltage: -48 VDC
•Maximum power consumption: 18 W
Environment Requirement
•Working temperature: -40 ℃to 65 ℃
•Working humidity: 5 %RH to 100 %RH
IP Protection Class
IP protection class: IP66
Passed Certifications
CCCi、Wi-Fi、RoHS
ZTE Corporation reserves the right to modify technical parameters with this
manual without notice.
Antenna Requirement
Antenna Type: N-type Dipole Antenna
Frequency (MHz) Gain(dBi)
2400 1.0
2410 1.2
2420 1.1
2430 1.2
2440 0.9
2450 1.0
2460 1.1
2470 1.0
2480 1.2
2490 1.4
2500 1.1
5220 2.98
5765 3.43
Confidential and Proprietary Information of ZTE CORPORATION 4
C h a p t e r 2
Configuration Preparation
Login
The ZXV10 W615 supports configuration based on Web pages. You can
configure and manage the ZXV10 W615 through a Web browser.
Open the Internet Explorer, type http://192.168.0.228 on the address
bar, and then press Enter. The login dialog box is displayed, see the following
figure.
Enter a valid user name and a password, and then click Login. The Web
configuration page of the ZXV10 W615 device is displayed.
Notes:
The initial user name and password of a common user are both user. This
user has only the authority to view the related Status information of this
device. The initial user name and password of the administrator are both
admin. This user has the authority to configure and manage the device
through the Web browser.
For the factory defaults of ZXV10 W615, refer to the following table:
Item Default Value
IP Address/Mask of
Ethernet interface IP address: 192.168.0.228
Subnet mask: 255.255.255.0
User name/Password Initial user name/password for common user: user/user
Initial user name/password for administrator:
admin/admin
ZXV10 W615 User Manual
Confidential and Proprietary Information of ZTE CORPORATION 5
Item Default Value
AP mode Fit AP
AP name APxxxxxxxxxxxx, where xxxxxxxxxxxx means the
Medium Access Control (MAC) address of the device
AC discovery mode Dynamic Host Configuration Protocol (DHCP),
applicable for fit AP only.
WAN mode DHCP
Wireless mode •Network card 1: Mixed (802.11b+802.11g)
•Network card 2: Mixed (802.11a+802.11n)
SSID SSID1 is enabled.
IntroductiontotheGUIforSoftwareSetup
After log in, the software interface is displayed as Figure 1.
Figure 1 Software Interface
1. Main menu
2. Submenu
3. Parameter
Select items on the main menu for software setup.
Select sub-items to set parameters on the left submenu.
ZXV10 W615 User Manual
6 Confidential and Proprietary Information of ZTE CORPORATION
Notes:
•Click Logout at the upper-right corner of the current Web page. Then,
the system log outs and returns to the Login page.
•Click at the bottom of the navigation pane to view the related
help information on the current page.
•Click the Help tab to open the Help page to view the related help
information.
•Click at the top of the current web page to change the language
to chinese.
Confidential and Proprietary Information of ZTE CORPORATION 7
C h a p t e r 3
Device Status
CheckingDeviceInformation
This section describes how to check the device information.
Steps
Select Status > Device Information to open the Device Information page.
Device information is displayed on the Device Information page as Figure
2.
Figure 2 Device Information
Notes:
This page includes the information of model, serial no, batch number,
hardware version, software version, boot loader version and AP name.
—END OF STEPS—
ZXV10 W615 User Manual
8 Confidential and Proprietary Information of ZTE CORPORATION
CheckingInformationofNetworkInterfaces
Checking Ethernet Interface Information
This section describes how to check Ethernet interface information.
Steps
Select Status > Network Interface > Ethernet, the following page with
Ethernet interface information is displayed.
Figure 3 Ethernet Interface Information
Notes:
This page includes Ethernet port, MAC address, status, mode,
packets received/bytes received, and packets sent/bytes sent
information.
You can click Refresh to view the latest Ethernet interface
information.
—END OF STEPS—
Checking WAN Connection
This section describes how to check the network connection information.
Steps
Select Status > Network Interface > WAN Connection., the following page
with the established connection information is displayed.
Table of contents
Other Zte Wireless Access Point manuals
