Zte MF286D User manual
MF286D
Quick Start Guide 1
Snabbstartsguide 26
Hurtigstartveiledning 51
Hurtig Start Guide 76
Pikakäynnistysopas 101
1
MF286D
Let’s go
Getting started with your device
2
LEGAL INFORMATION
Copyright © 2020 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or
utilized in any form or by any means, electronic or mechanical, including
photocopying and microlm, without the prior written permission of ZTE
Corporation.
The manual is published by ZTE Corporation. We reserve the right to
make modications on print errors or update specications without prior
notice.
Version No. : R1.1
3
Getting to Know Your Device
External View
Indicators
Indicator State Description
POWER Blue on Power is on and external power
supply is working normally.
O Power is o or external power
supply is working abnormally.
4
Indicator State Description
WIFI Blue on Wi-Fi works normally.
Blue ashing WPS is active.
O Wi-Fi is o.
PHONE Blue on A phone call in ongoing.
Blue ashing The phone is ringing.
O The phone is not in use.
3G/4G
Red
The device is turned on but not
registered to the mobile network
or no SIM card is inserted or
there is no network service
available.
Blue ashing
The device is connected to the
4G/LTE network and data is
being transferred.
Blue on The device is registered to the
4G/LTE network.
Green ashing
The device is connected to the
3G network and data is being
transferred.
Green on The device is registered to the
3G network.
5
Indicator State Description
SIG Blue on Signal strength level. The signal
strength is from weak to strong.
O There is no signal or no SIM card
is inserted.
NOTE:
The phone function needs support from your network provider.
Buttons
Button Description
RESET Press and hold for about 3 seconds to restore factory
default congurations.
WLAN Press to turn o/on the Wi-Fi function.
WPS Press to activate the WPS function.
6
Installing the SIM card
Hold the SIM card with the cut corner oriented as shown below and slip
it into the card slot until you hear a click.
7
WARNING!
• Before installing the SIM card, power o your device and remove
the external power adapter.
• Your device does not support micro-SIM or nano-SIM card or any
other nonstandard SIM cards. To avoid device damage, please do
not use them or any card holders.
8
Getting Started With Your Device
Starting Your Device
CAUTION:
Your device must be placed in a well-ventilated environment. Do not
cover the device.
Slide the on/o switch to start your device. After the device is initialized,
make sure the LED indicators are in normal status.
NOTE:
After your device is powered o, if you receive a call, the caller will hear
a message similar to “The subscriber you are dialling cannot be reached
now.”
Accessing the Internet
The router is precongured and will connect to Internet automatically
when it is started. Connect computers and other network devices with
cable or using the wireless network.
Other manuals for MF286D
3
Table of contents
Languages:
Other Zte Network Router manuals
Zte
Zte ZXHN F680 User manual
Zte
Zte VS2801SG User manual
Zte
Zte mf910l User manual
Zte
Zte MF920U User manual
Zte
Zte WF821 User manual
Zte
Zte ZXR10 3800-8 Installation instructions
Zte
Zte ZXV10 W300 User manual
Zte
Zte ZXV10 W300 User manual
Zte
Zte ZXR10 2600 Technical specifications
Zte
Zte ZXHN H108L User manual
