ZKTeco ZKIWBA01B User manual
Mobile Stand Installation Guide Installation steps
Version: 1.1
Step 1 Step 2
Adjust the wheel to the brake state and screw it into
the brackets (as Figure 1).
Attach the Wall Bracket to the Left Bracket (as
Figure 2), 3 sets of mounting heights (1 & 4, 2
& 5, 3 & 6), optional on demand.
· To ensure correct and safe use, please read
carefully this manual before installation.
· It is recommended to equip this model with a 55 to 86
inch interactive whiteboard.
Adjust the wheel to
the braking state
before the operation.
· The maximum weight of the bearing can support up to 100 kg. one hole position
twoof support
3456
one Wall Bracket Hole Suggestions
Compatible models matching holes
Packing list 55“ 3, 6
2, 5
1, 4
65" - 70"
75" - 86"
Front of
Front of
A - Left bracket 1 piece C - Wall bracket 1 piece E - Wheels 4 pieces
Figure 1 Figure 2
Step 3 Step 4
Attach the right bracket to the other end of the bracket.
wall (as shown in Figure 3).
Installing the tray between the two
supports (as in Figure 4).
First insert the
B - Right bracket 1 piece D - Tray 1pc F - Bar for hanging on the wall 2 pieces* tray in the
positioning pin
on the stand
Cross Slotted Recessed Hex Head Screw M8×25mm 14 pieces one
Spring cushion M12 ∅20×∅13mm 4 pieces
M6 screw*
Phillips Screwdriver (User Prepared)
M6×130mm 2 pieces
1 pc
1 pc
adjust the
tray in the
Adjustable Wrench (Prepared by user) positioning
bolts
hold everything
the bolts one
Note: "*" Indicates that due to differences in models, some models include this accessory, please refer to the
current one. figure 3 Figure 4
Translated from Spanish to English - www.onlinedoctranslator.com
step 5 step 6 OBSERVATIONS:
Attach the wall hanger bar to the entire machine as required. Hang the complete assembled machine on the wall bracket
and lock the safety screw on the
When the interactive whiteboard with its own hanging bar cannot be effectively combined with the tripod, you
need to modify it together with the wall mount plate as shown below.
necessary (as shown in Figure 5).
Bar to hang on the wall (as in Figure 6).
Make sure the brakes are locked, this step
requires at least 2 professionals to complete. oneAttach the wall mount plate to the wall bracket.
F
one
Front of
front a
Make sure the side of the
wall plate with the locking
holes is the front side.
Figure 5 Figure 6
twoHang the interactive whiteboard on the wall mount plate and lock the safety pin.
step 7
Please refer to the following image to see the
finished product.
ZKTECO CO.,LTD. www.zkteco.comCopyright © 2020 ZKTECO CO., LTD. All rights reserved.
ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia City, Dongguan, China. Telephone: +86
769 - 82109991 Fax: +86 755 - 89602394
Other ZKTeco Rack & Stand manuals
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
