ZKC PDA3501 User manual
Shenzhen ZKC Software Technology Co.,Ltd
Web: www.sznewbest.com
Address: 1st Floor, No. 1 Block, Zhongkenuo Industry Park, Beiqi Road, Xixiang Town, Bao'an District,
Shenzhen
PDA3501 User Manual
1. Product Brief Introduction
Shenzhen ZKC Software Technology Co.,Ltd
Web: www.sznewbest.com
Address: 1st Floor, No. 1 Block, Zhongkenuo Industry Park, Beiqi Road, Xixiang Town, Bao'an District,
Shenzhen
2. Power on/off
Power on: Please put the battery right before power on the device(the battery is
put opposite while shipping). Long press the power key to start.
Power off: Long press the power key and click “power off”.
Shenzhen ZKC Software Technology Co.,Ltd
Web: www.sznewbest.com
Address: 1st Floor, No. 1 Block, Zhongkenuo Industry Park, Beiqi Road, Xixiang Town, Bao'an District,
Shenzhen
3. Barcode, Qrcode Scanner
3.1 Camera scanner(scan barcode and Qrcode)
Open the “ZbarScan”App, then press “scan”key to scan(the scanning
distance have to be within 10cm ).
Shenzhen ZKC Software Technology Co.,Ltd
Web: www.sznewbest.com
Address: 1st Floor, No. 1 Block, Zhongkenuo Industry Park, Beiqi Road, Xixiang Town, Bao'an District,
Shenzhen
3.2 Laser Barcode Scanner version(scan barcode only)
Open the “barcode scanner”App, then press the “scan”key to scan
Shenzhen ZKC Software Technology Co.,Ltd
Web: www.sznewbest.com
Address: 1st Floor, No. 1 Block, Zhongkenuo Industry Park, Beiqi Road, Xixiang Town, Bao'an District,
Shenzhen
When the “barcode scanner”App run on the backend, it can scan any barcode
in any input box.
For example, open the message input box, and press the “scan”key, the
barcode number will show as below:
3.3 Qrcode scanner(scan barcode and Qrcode)
Same as laser barcode scanner, please refer to 3.2.
Shenzhen ZKC Software Technology Co.,Ltd
Web: www.sznewbest.com
Address: 1st Floor, No. 1 Block, Zhongkenuo Industry Park, Beiqi Road, Xixiang Town, Bao'an District,
Shenzhen
Note 1: If the device can not use input box to scan barcode, please confirm
that whether the “barcode scanner” App run on the backend, or whether the
soft keyboard is “English(United States)”.
Setting---Language&input-----English(United States)
Note 2: If you can see red line when scan barcode (or QR code ),but no beep
and can not get barcode(or QR code) number on the screen , pls setting as
below:
For laser barcode version device, press”barcode modules set”,than
press”Restore Factory Settings”,press”Setting Data Format”,do not exit the
setting page and try to scan barcode,try this once more if still not get barcode.
For QR code scanner version,press Qr modules set,than press”Restore
Factory Settings”,press”Setting Data Format”.
Shenzhen ZKC Software Technology Co.,Ltd
Web: www.sznewbest.com
Address: 1st Floor, No. 1 Block, Zhongkenuo Industry Park, Beiqi Road, Xixiang Town, Bao'an District,
Shenzhen
4. NFC Test
Open the “NFC reader”App and put the NFC card on the back of the
device(Reading distance is within 6cm).
Shenzhen ZKC Software Technology Co.,Ltd
Web: www.sznewbest.com
Address: 1st Floor, No. 1 Block, Zhongkenuo Industry Park, Beiqi Road, Xixiang Town, Bao'an District,
Shenzhen
5. GPS Test
Pull-down the screen and open “GPS”, then open the “GPS Test”App,
test it outdoor.
Shenzhen ZKC Software Technology Co.,Ltd
Web: www.sznewbest.com
Address: 1st Floor, No. 1 Block, Zhongkenuo Industry Park, Beiqi Road, Xixiang Town, Bao'an District,
Shenzhen
6. 3G Test
Insert into the 3G card to the slot and power on the device.
Click “Change”and select “data connection”, then click “SIM2”as below:
Shenzhen ZKC Software Technology Co.,Ltd
Web: www.sznewbest.com
Address: 1st Floor, No. 1 Block, Zhongkenuo Industry Park, Beiqi Road, Xixiang Town, Bao'an District,
Shenzhen
7. WIFI and Bluetooth test are same as Android mobile phone
Pull-down the screen to open WI-FI and bluetooth.
8. SDK Link
Table of contents
