Zitzi Guppy User manual
EN
2014.09.02BR201209-01 . UT.02
User manual
Check the checkbox if the product is
CUSTOMIZED. The CE Mark is no
longer valid and should be removed.
The product is only intended for use as an under frame together with seating
systems produced by Anatomic SITT AB. If other uses are desired, please contact
Anatomic SITT AB.
User manual - Zitzi Guppy I 3© Anatomic SITT AB
Safety precautions
Introduction
Correspondence
Craschtested and approved
This product is manufactured by Anatomic SITT AB
For you to use all advandtages of the Zitzi Guppy, it is important that you read
through this manual thoroughly. This applies to all persons who are in the
vicinity of the user. Adjustment of the Zitzi Guppy should always be performed
by medically qualied person. If you need additional information, please contact
Anatomic SITT AB.
Zitzi Guppy and its accessories are CE marked products. A unique serial number
is located on a label placed on the lower part of the frame. This serial
number should be quoted in any correspondence regarding the product.
Zitzi Guppy is craschtested and approved according to 7176-19 for 70 kg in
vehicle.
Postal address Anatomic SITT AB, Box 6137, SE-600 06 Norrköping
Street address Anatomic SITT AB, Terminalgatan 1, SE-603 61 Norrköping
Telephone +4611-161800
Fax +4611-162005
Email [email protected]
Web anatomicsitt.com, youtube.com/anatomicsitt
Obs!
The prescriber or person with equivalent qualications and knowledge of the
user and the tool will always carry out a risk assessment before use. If this
analysis shows that there may be a risk of serious injury, the user must never
be left unattended when using the Guppy.
User manual - Zitzi Guppy I 4© Anatomic SITT AB
Safety precautions 3
Introduction 3
Seat part 6
Mounting of the seatplate 6
Tilt 7
Tilt of the seat 7
Armrest 9
Installation on chassis 9
Height adjustment 9
Width adjustement 9
Angle adjustment upwards and downwards 9
Depth adjustment 9
Driving-handle 11
Installation of driving-handle 11
Depth adjustment of the driving-handle 11
Angle adjustment of the driving-handle 11
Angle adjustment of driving-handle 11
Fold the driving-handle 11
Wheels with Quick-release 12
Mounting of wheels with quick-release 12
Release the wheel 12
Driving wheels 13
Wheel position 13
Caster 14
Installation of caster 14
Mounting of the caster on the caster house fork 14
Caster positioning 14
Caster fork position 15
Angle adjustment of caster fork 15
Brake 17
Drum brake 17
Setting the brakes 17
Releasing the brakes 17
Troubleshooting of the brakes 17
Installation of drum brake 19
Parking brake 20
Installation of parking brake 20
Using the parking brake 20
Footrest 21
Mounting of footrest 21
Safety stop 21
Adjusting the angle on the knee-joint 21
Adjustment the height of the footrest 21
Calf support 22
Mounting of calf support 22
Height adjustment of the calf support 22
Width adjustment of the calf support 22
Anti-tip device 23
Installation of anti-tip device 23
Using the anti-tip device 23
Step bar 24
Installation of the step-bar 24
Using the step-bar 24
Transportation kit 26
Installation of front bracket 26
Installation of rear bracket 26
Installation of safety-loop 26
Using the transportation kit 26
Direction lock 28
Install the direction lock 28
Activate direction lock 28
Releasing the direction lock 28
Table of contents
User manual - Zitzi Guppy I 5© Anatomic SITT AB
Mudguards 29
Installation of mudguards 29
Adjusting the mudguard 29
Transportation in a vehicle 31
Guidelines for transportation in a car 31
Crash tested and approved 31
Maintenance instructions 32
Service intervals 32
Cleaning and washing instructions 32
Gas piston 32
Warranty 33
Combinations 33
Spare parts 33
Marking 33
Recycling 33
Reconditioning 34
Service 34
Cleaning 34
Finishing 34
Marking 34
Wheels 34
EN
Paint 34
Stability 35
Tubular frame and details 35
Forks 35
Driving bow and push-handle 35
Brakes 35
Folding mechanism and tilt 35
Function control 35
Adaptation and customization 36
Recommendations 36
Risk assessment 36
Terms of sale 37
Warranty 37
Warranty claims 37
Returning products 37
Customer service 38
Technical data 39
User manual - Zitzi Guppy I 6© Anatomic SITT AB
Seat part
Installation of the mounting plate
The seating system mounting plate is easily mounted on the chassis by four (4)
screws, washers and nuts in selected tracks (A) on the chassis seatplate.
Place the seating systems mounting plate (B) on the chassis seatplate (C) and
stick through the supplied screw (D). Then meet up with nut and washer (F)
on the underside of its chassis seatplate. Tighten the screws (D) rmly.
Note!
The picture shows only one type of mounting plate assembly instructions. For
more information about mounting plates, see the instruction manuals for se-
lected seating system.
A
C
D
B
F
User manual - Zitzi Guppy I 7© Anatomic SITT AB
Tilt the seat
The seatplate is adjustable at an angle between 0-32°. Press the tilt handle (A)
while holding the handle and pushing it upwards or downwards. Let go of the tilt
handle (A) when the seat is in the required position.
To restore the angle to its neutral position, press the tilt handle (A) and push the
handle upwards and backwards.
Obs!
Be careful to avoid risk of pinching while tilting the seat.
Tilt
Obs!
Be aware of the possible increased risk of overturn during tilt.
A
User manual - Zitzi Guppy I 8© Anatomic SITT AB
D
B
C
A
User manual - Zitzi Guppy I 9© Anatomic SITT AB
Armrest
Mounting on the frame
Loosen the screws (A) completely on each side. Mount the mounting bracket
around the driving bow. Put back the screws (A) and tighten.
Height adjustment
Loosen the screws (A) and adjust to required height. Tighten the screws.
Width adjustment
Loosen the screws (B) and adjust to required width. Tighten the screws.
Angle adjustment upwards and downwards
To adjust the angle of the armrest loosen the adjuster (C) and adjust it to the
required angle. To compensate you can also adjust the angle in the armrests
attachment. Loosen the screws (A) and adjust the angle using the three holes
(E) in the attachment.
Depth adjustment
Loosen the screws (D) underneath the armrest plate and adjust to required
position using holes underneath.
User manual - Zitzi Guppy I 10© Anatomic SITT AB
A
B
C
D
Table of contents
Other Zitzi Wheelchair manuals
