zioncom ZC-IP0418A User manual
UserGuide
-1- www.zioncom.net
IP ROUTER
Wireless Broadband Router
11G 54Mbps·UPNP·QoS·VPN Server
Version 1.2
ZIONCOM Technology Co,.Ltd
2004.08
UserGuide
-2- www.zioncom.net
Great tks for your purchasing IP0415 Wireless Router ,IP0415 Supports
IEEE802.11G Standard ,transferring date with speed of 54Mbps , also conforms to
IEEE802.11B Standard.IP0415 satisfy enterprise with small scale ,SOHO user to lay
out WAN and Lan . IP0415 provide multi-protection for the security for the networks,
such as support or prohibit SSID broadcast, not allow AP to broadcast SSID network
name for SSID prevention. IP0415 support WEP for the security of WLANS with
powerful firewall. IP0415 allow many PCs to share one pcs WAN Cable and one
Internet account by ISP. IP0415 allow varies ways to internet ,such as ADSL ,Cable
Modem, dial up automatically, easy to configure. IP0415 combines 4 port Ethernet
Switch to connect with Ethernet adaptors . VLAN server allow internet user to visit
website ,FTP and other service in LAN . IP0415 control the outside visit, configure
different authorized access . IP0415 support Web management ,DMZ, network game
and video conference.
This manual is the user’s guide for IP0415.
This manual consist of hardware specification , installation guide, configuration
guide and definition on how to use IP0415.
Pls use this manual for your reference.
First , Pls read the installation guide in chapter 4, note some points when install.
Second , Pls read chapter 6, in order to allow IP0415 to run in corresponding internet
environment.
UserGuide
-3- www.zioncom.net
TABLE OF CONTENTS
1.WARNING…………………………………………………………………6
2.PACKAGE CONTENTS…...………………………………………………7
3.SPECIFICATION……………………………………………………………8
4.INSTALLATION…………………………………………………………12
4.1 Before Installation……………………………………………………………….12
4.2 Installation ……………………………………………………………12
4.3 Sketch Map …………………………………………………………………14
5. LOCAL COMPUTER SETUP….………………………………..........15
5.1 Windows 2000 SETUP…………………………………………………………..…16
5.2 Windows XP SETUP……………………………………………………………..…20
6. IP ROUTER SETUP ………………………………………..……………26
6.1 Start Internet Explore to Login……………………………………..……………26
6.2 PPPoE Configuration …………………………………………………………..27
6.3 Dynamic IP(Cable Modem...) Configuration………………………………… 32
6.4 Static IP Configuration ……………………………………………………………36
6.5 Status……………………………………………………………………………38
6.5.1 WAN Status………………………………………………………………38
6.5.2 Wireless Status………………………………………………………………39
6.5.3 LAN Status ……………………………………………………………40
6.6 Basic Configuration …………………………………………………………41
6.6.1WAN Configuration ……………………………………………………………41
6.6.2 Wireless Configuration ………………………………………………………42
6..3 LAN Configuration………………………………………………………………44
6.6.4 Connection Configuration …………………………………………………47
6.6.5 IP Routing List …………………………………………………………………48
6.7 Sytem……………………………………………………………………………49
6.7.1 Administrator Configuration …………………………………………………49
6.7.2 System Upgradation ………………………………………………………50
6.7.3 System Memradom……………………………………………………………52
UserGuide
-4- www.zioncom.net
6.7.4 Others Configuration ……………………………………………………53
6.8 QoS………………………………………………………………………………55
6.8.1 Basic Configuration ……………………………………………………………55
6.8.2 IP QoS……………………………………………………………………57
6.8.3 Application Programme QoS…………………………………………………58
6.8.4 Ports QoS…………………………………………………………………59
6.9 NAT………………………………………………………………………………60
6.9.1Application …………………………………………………………………60
6.9.2 Virtual Server……………………………………………………………62
6.9.3 Port Transfer …………………………………………………………………64
6.9.4 Port Trigger…………………………………………………………………65
6.10 Advance Configuration …………………………………………………………66
6.10.1 Firewall……………………………………………………………………66
6.10.2 DDNS……………………………………………………………………68
6.10.3 Remote Wake-up……………………………………………………………69
6.10.4 URL Filtering …………………………………………………………………70
6.10.5 Remote Management……………………………………………………71
6.10.6 Time Management …………………………………………………………72
6.10.7 VPN………………………………………………………………………74
UserGuide
-5- www.zioncom.net
1. Warning
1. Pls used adaptor provided by manufacturer ,otherwise will break IP0415.
2. Do not drop IP Router down or any damage to the Router and its
electronic component.
3. Do not disassemble IP Router ,otherwise warranty for repair will not be
guaranted
4. Do not exposure IP Router under Sunshine ,avoid heat.
5. Pls keep IP Router dry and away from fire.
6. Pls keep IP Router under shield and run under 0-40 to the perfect state.
UserGuide
-6- www.zioncom.net
2. PACKAGE CONTENTS
Package contents of Wireless IP Router as follows:
1. Wireless IP Router
2. Switch DC Power Adapter (7.5V,1.5A)
3. Ethernet Cable
4. UserGuide
UserGuide
-7- www.zioncom.net
3.SPECIFICATION
This Wireless IP Router is a highly integrated Wireless IP Router with many
functions such as Gateway, Switch, DHCP server, Firewall etc:
11G 54Mbps ：Support 802.11g ，high-speed data rate up to 54Mbps for
802.11g(draft) and 11Mbps for 802.11b with wide range coverage.
Network Address Transform (NAT)：With providing Internet application this IP
Router can allow more than one user to connect with Internet at the same time by
sharing one public IP address; It supports many connection ways：xDSL、Cable
Modem、LAN/ Leased Line and so on.
4 Ports 10/100M Switch：It has 4 Network 10/100M switch ports，port support
MDI/MDIX automatic identification function, Switch port can connect to other switches,
so that can support over hundred computers to go to Internet at the same time.
PPPoE(ADSL) Automatic Disconnection/Connection ：Users can optionally
choose automatic disconnection in idle time and connection in access time to save
internet access cost.
DHCP Server Supported：All of the networked computers can retrieve TCP/IP
settings automatically from this product.
Static IP Address Binding: Authorize user to manage and configure PC in LAN in
most by binding MAC address and IP address together .
System Memorandum: IP0414 record routing history and forwarder to administrator
mail box .
UPnP : Defaulted UPnP enable user to configure networking hardware and software.
Management Based on Web Page ：Both network configuration and system
configuration are based on inside Web Server. The user interface is clear and usage
is easy. By this interface users can also update software to enhance the system
stability and expansibility.
Internet Access Control：Different administration can be setup for different users.
Data Package Filtration : Port Filtration ,IP Address Filtration, MAC Address filtration,
Key word Filtration enable user to configure IP router to analyse data package can
be forwarded or refused.
Virtual Server：Allow other users from Internet access WWW, FTP server or other
UserGuide
-8- www.zioncom.net
servers in LAN.
QoS: Control the IP Router bandwidth forwarding and transferring by configuration IP
Address QoS , application QoS and port QoS.
Firewall：Users can randomly refuse or allow data from Internet
Scheduler : Manage and control Local Network accessing Internet by configuration
time .
DMZ Server：Allow one computer to be totally open to Internet to make sure special
application.
Remote Management：Users can totally manage office or home network wherever
they are.
DDNS：By this function users can set up their own web station.
Remote Wake-up: Enable user to remote wake up PCs in LAN .
Support VPN Pass-through：Supports VPN Pass-through PPTP dialogue，and also
supports users to configure VPN Server and Client in LAN.。
VPN server: Allow you to setup VPN server, allow 5 VPN client logging at same time
Detailed Specification
ITEM WIRELESS IP ROUTER
Standard IEEE 802.11G、IEEE 802.11B、IEEE 802.3、IEEE 802.3u、
IEEE 802.3x、
Protocol TCP/IP, NAT, DHCP ,UDP, FTP, PPPoE, PPTP,
L2TP,HTTP,DNS, IPSec/VPN Pass-through…
WAN One 10/100Mbps RJ-45 port, automatic
sense cross cable
External
Port LAN Four 10/100Mbps speed Ethernet switch
port, auto sense cross cable
Frequency
Range 2.412~2.472 GHz
Forward
Speed
1, 2, 5.5, 11Mbps(802.11b)
6, 9, 12, 18, 24, 36, 48, 54 Mbps(802.11g)
ical parameter
Wireless
Parameter
Opt.Channel 14
UserGuide
-9- www.zioncom.net
Data
Modulation CCK, DQPSK, DBPSK, OFDM
RF Power 16-18dBm
Antenna
Type
1*2.4Ghz Dipole Anenna
1*2.4Ghz Embedded Antenna
Cable UTP100Base-TX：UTP/STP 5 or above standard
Control
interface Based on Web application
UserGuide
-10- www.zioncom.net
Inside
function
10/100Mbps switch
LAN/WAN port auto sense cross cable
WAN port static/dynamic IP flexible setting up
Support 64/128 bit WEP and MAC
Support AP client Bridge-Point-to Point mode
Support client mode
PPPoE dial-up and connection time setting up
PPPoE dial-up and automatic/manual connection
Double IP Configuration
Support VPN Pass-through
DHCP Service
DNS relaying
DMZ Server
Static IP Address Binding
System Memorandum forwarding
IP Router configuration back-up
UPNP
Connection setting up and stat.
Time control on access to internet
Firewall
NAT ON/OFF
Port/IP/MAC/Key word Filtration
Remote control
Remote Wake-up
DDNS
Gateway
Virtual Server
Qos & VPN Server
UserGuide
-11- www.zioncom.net
CPU KENDIN KS8695PX(ARM9)
FLASH 2MB Flash
Memory 16MB SDRAM
LAN
connection Static or dynamic IP address
WAN
connection xDSL、Cable Modem、Special cable、LAN
Power supply DC 7.5V/1.5A switch power adapter
Size **mm×**mm×**mm
Weight *KG
Temperature 0 ~ 60 ℃
Product Specification
Humidity 10 ~ 85%
Compatible OS：
Windows 95/98/ME/NT/2000/XP
Mac OS Linux or other UNIX system
Notes:
If the specification and functions of IP Router have been changed, it will not be
informed. The users please take care of it by themselves.
4.INSTALLATION
4.1 BEFORE INSTALLATION：
4.1.1. Firstly please confirm your computer OS (Windows 95,98,NT,ME,2000, XP,
Linux, Mac) and Web browser (Internet Explorer 4.0 with JavaScript
function、Netscape Navigator 4.0 or above version)。
4.1.2. Make sure there is LAN Card which has been correctly installed in your
computer.
4.1.3. If you are xDSL user, please remember your user ID and password.
4.1.4. If you connect Internet by LAN or MAN , please get the following
UserGuide
-12- www.zioncom.net
information from your network administrator: IP address is static or
dynamic, DNS, default gateway, account and so on.
＊If your computer has installed ADSL PPPoE dial-up software before the
installation of IP Router, please backup your installation software and uninstall your
ADSL PPPoE dial-up software by Start->control panel->Add or Remove Programs.
4.2 INSTALLATION
4.2.1. Setup WAN connection: connect broadband cable (xDSL, Cable Modem or
LAN/ Leased cable) with WAN port of IP Router.
4.2.2. Setup LAN connection: connect your computer LAN card’s port or your
switch UPLINK port with one LAN port of IP Router by a common network
cable.
Note: All LAN ports of IP Router can automatically sense cross cable, so you can
either use through cable or cross cable to connect LAN card or switch.
4.2.3. Turn on the power : connect and the power supply, turn on it. Then IP
Router comes to self-detect state. During the self-detect: PWR LED will be
long light, RUN LED will slow flash after correct startup, other four LAN
LED and WAN LED will flash only twice rapidly, then the system will come
to normal work state.
4.2.4. Start computer
LED Description Explanation
PWR Power LED long light
RUN System status LED LED flash when device work normally.
LED doesn’t on or flash refer some problem
with device
WLAN WLAN port
connection LED
flashing refers to data transformation
WAN WAN port
connection LED
flashing refers to data transformation
LAN LAN port flashing refers to data transformation
UserGuide
-13- www.zioncom.net
connection LED
Port explanation
Antenna Antenna provide wireless LAN functionality and
ensure optimal signal strength
Power jack Connect power adapter (7.5V/1.5A)
Reset
Press Reset button. Switch the power off/on. After
switching the power on, about 5 seconds later
RUN LED will flash rapidly, then release the
button. After IP Router startup, all configuration
will restore to default configuration.
WAN Connect xDSL/Cable Modem or Special cable
LAN 1~4 Connect personal computer or hub, switch and so
on
PWR
RUN
WLAN
WAN
LAN 1 ~ 4
UserGuide
-14- www.zioncom.net
NOTE：After switch or hub expand, Wireless IP Router can connect at most 253
client computers in LAN or WLAN .
4.3 NETWORK SKETCH MAP
Antenna
Power Porta
Reset
WAN
LAN 1 ~ 4
UserGuide
-15- www.zioncom.net
Note：During the usage, the sequence of turn on is：firstly turn on Modem’s
power supply ，1 minute after Modem startup turn on IP Router power supply ,
then turn on the computer .
5. LOCAL COMPUTER SETUP
Users should configure local network to access Internet by IP Router. Users
should know the default configuration of IP Router before installation. Users must
connect with IP Router again After configure computer’s local network. Please
make sure your computer setting is as follows, Otherwise IP Router can not be
correctly connected (Linux and Mac users please setup as follows by relative
UserGuide
-16- www.zioncom.net
conference).
The default configuration of IP Router is:
— IP address：192.168.0.1
— Subnet Masks：255.255.255.0
Users can setup static or dynamic IP configuration.
5.1 Windows 2000 SETUP
(1) Install IP Router.
(2) Start Windows 2000 and check LAN LED is on or off. If off, please confirm
the connection of your computer with IP Router.
(3) Click “start”->“Setting”->“Panel Control”.
(4) Double click the “Network and Dial-up Connection” in “control panel”.
UserGuide
-17- www.zioncom.net
(5) Click “Local area connection”->“Properties”->“Internet protocol
（TCP/IP）”and “Properties”.
(6) Click“General ” bar ,Select “Obtain an IP address automatically” and “Obtain
DNS server address automatically”
(7) Click “OK”.
UserGuide
-18- www.zioncom.net
(8) Click ”Start” ->“Run”.
(9) Input ”cmd” ,then click “OK”.
(10) Input “ipconfig” in Pop-up Command window.
(9) Please make sure your IP is the same with below. If same then your
configuration is successful, or please redo the above steps and restart your
computer.
zThe IP address is between 192.168.0.2 and 192.168.0.254
zThe subnet mask is 255.255.255.0
UserGuide
-19- www.zioncom.net
zThe default gateway is 192.168.0.1
(10) Input “ping 192.168.0.1”, then “Enter”.
(11) If you can see “Reply from 192.168.0.1: bytes=32 time=2ms TTL=64”，then the
connection between your computer and IP Router is completed.
UserGuide
-20- www.zioncom.net
5.2 Windows XP SETUP
(1) Install IP Router.
(2) Start Windows XP and check LAN LED is on or off. If off, please confirm
the connection of your computer with IP Router.
(3) Click “Start”->“Setting”->“Panel Control”
(4) Double click the “Network and Internet Connections” in “control
panel”.
(5) Click “Network connection”->“local area connection”->“properties”->
“Internet protocol（TCP/IP）”and “Properties”.
(6) Click “General ” ,Select “Obtain an IP address automatically” and
“Obtain DNS server address automatically”
(7) Click “OK”
Table of contents
