Zibro SRE 835 E User manual

R 125 E 1998 / 1999

D Benötigen Sie weitere Informationen oder treten Probleme auf, besuchen Sie bitte unsere Website www.zibro.com, oder setzen Sie sich mit

unserem Kundendienst in Verbindung (Telefonnummer auf www.zibro.com).

For alle yderligere oplysninger eller ved eventuelle problemer med apparatet henvises til www.zibro.com eller det lokale Kundecenter (telefon-

numre findes i www.zibro.com).

Si necesita información o si tiene algún problema, visite nuestra página Web www.zibro.com, o póngase en contacto con el servicio cliente

(hallará el número de teléfono en www.zibro.com).

F Si vous souhaitez obtenir des informations supplémentaires ou si vous rencontrez un problème, rendez-vous sur notre site Web (www.zibro.

com) ou contactez notre service client (vous trouverez l’adresse et numéro de téléphone sur www.zibro.com).

Jos haluat huoltoapua, lisätietoja tai laitteen kanssa tulee ongelmia, tutustu verkkosivustoon osoitteessa www.zibro.com tai kysy neuvoa PVG

kuluttajapalvelukeskuksesta (www.zibro.com).

If you need information or if you have a problem, please visit the our website (www.zibro.com) or contact our sales support (you find its phone

number on www.zibro.com)

I Per informazioni e in caso di problemi, visitate il sito Web www.zibro.com oppure contattate il Centro Assistenza Clienti (per conoscere il numero

di telefono, consultate www.zibro.com).

N Hvis du trenger informasjon, eller hvis du har et problem med produktet, kan du gå til nettsidene www.zibro.com. Alternativt kan du kontakte

med PVG’ forbrukertjeneste (telefonnummeret i www.zibro.com).

Als u informatie nodig hebt of als u een probleem hebt, bezoek dan de onze website (www.zibro.com) of neem contact op met de afdeling

sales support (adres en telefoon op www.zibro.com).

P Se necessitar de informações ou se tiver problemas, visite o Web site www.zibro.com ou contacte o Centro de Assistência (número de telefone

o www.zibro.com)

W przypadku problemów i w celu uzyskania szczegółowych informacji odwiedź stronę internetową Zibro dostępną pod adresem www.zibro.

com lub skontaktuj się z Centrum kontaktów Zibro (www.zibro.com)

S Om du behöver service eller information eller har problem med apparaten kan du besöka www.zibro.com eller kontakta Zibro kundtjänst (du

hittar telefonnumret på www.zibro.com).

Če želite dodatne informacije, obiščite spletno mesto podjetja na naslovu www.zibro.com ali pokličite na telefonsko (www.zibro.com).

Daha fazla bilgiye ihtiyaç duyarsanız veya bir sorunla karşılaşırsanız, www.zibro.com adresindeki Zibro Internet sitesini ziyaret edin veya ülkenizde

bulunan Zibro müşteri merkeziyle iletişim kurun (telefon numarasını: www.zibro.com).

--- --- -- ----

-- -- --- -----

-- ---- -- ----

-- -- --- -----

--- --- -- ----

-- ---- -- ----

www.zibro.com

Distributed in Europe by PVG Holding B.V.

Zibro® is registered trademark of TOYOTOMI Co., Ltd. for parafﬁn heaters.

ZIBRO brand parafﬁn heaters are made in Japan and imported by PVG Holding B.V.

SRE 835 E

FIN

MANUEL D'UTILISATION

GEBRAUCHSANWEISUNG

BRUGSANVISNING

INSTRUCCIONES DE USO

KÄYTTÖOHJE

OPERATING MANUAL

ISTRUZIONI D’USO

BRUKSANVISNING

GEBRUIKSAANWIJZING

INSTRUKCJA OBSŁUGI

BRUKSANVISNING

NAVODILA ZA UPORABO

102

112

cover_SRE835E.indd 3 28-06-12 11:17

D Benötigen Sie weitere Informationen oder treten Probleme auf, besuchen Sie bitte unsere Website www.zibro.com, oder setzen Sie sich mit

unserem Kundendienst in Verbindung (Telefonnummer auf www.zibro.com).

For alle yderligere oplysninger eller ved eventuelle problemer med apparatet henvises til www.zibro.com eller det lokale Kundecenter (telefon-

numre findes i www.zibro.com).

Si necesita información o si tiene algún problema, visite nuestra página Web www.zibro.com, o póngase en contacto con el servicio cliente

(hallará el número de teléfono en www.zibro.com).

F Si vous souhaitez obtenir des informations supplémentaires ou si vous rencontrez un problème, rendez-vous sur notre site Web (www.zibro.

com) ou contactez notre service client (vous trouverez l’adresse et numéro de téléphone sur www.zibro.com).

Jos haluat huoltoapua, lisätietoja tai laitteen kanssa tulee ongelmia, tutustu verkkosivustoon osoitteessa www.zibro.com tai kysy neuvoa PVG

kuluttajapalvelukeskuksesta (www.zibro.com).

If you need information or if you have a problem, please visit the our website (www.zibro.com) or contact our sales support (you find its phone

number on www.zibro.com)

I Per informazioni e in caso di problemi, visitate il sito Web www.zibro.com oppure contattate il Centro Assistenza Clienti (per conoscere il numero

di telefono, consultate www.zibro.com).

N Hvis du trenger informasjon, eller hvis du har et problem med produktet, kan du gå til nettsidene www.zibro.com. Alternativt kan du kontakte

med PVG’ forbrukertjeneste (telefonnummeret i www.zibro.com).

Als u informatie nodig hebt of als u een probleem hebt, bezoek dan de onze website (www.zibro.com) of neem contact op met de afdeling

sales support (adres en telefoon op www.zibro.com).

P Se necessitar de informações ou se tiver problemas, visite o Web site www.zibro.com ou contacte o Centro de Assistência (número de telefone

o www.zibro.com)

W przypadku problemów i w celu uzyskania szczegółowych informacji odwiedź stronę internetową Zibro dostępną pod adresem www.zibro.

com lub skontaktuj się z Centrum kontaktów Zibro (www.zibro.com)

S Om du behöver service eller information eller har problem med apparaten kan du besöka www.zibro.com eller kontakta Zibro kundtjänst (du

hittar telefonnumret på www.zibro.com).

Če želite dodatne informacije, obiščite spletno mesto podjetja na naslovu www.zibro.com ali pokličite na telefonsko (www.zibro.com).

Daha fazla bilgiye ihtiyaç duyarsanız veya bir sorunla karşılaşırsanız, www.zibro.com adresindeki Zibro Internet sitesini ziyaret edin veya ülkenizde

bulunan Zibro müşteri merkeziyle iletişim kurun (telefon numarasını: www.zibro.com).

--- --- -- ----

-- -- --- -----

-- ---- -- ----

-- -- --- -----

--- --- -- ----

-- ---- -- ----

www.zibro.com

Distributed in Europe by PVG Holding B.V.

Zibro® is registered trademark of TOYOTOMI Co., Ltd. for parafﬁn heaters.

ZIBRO brand parafﬁn heaters are made in Japan and imported by PVG Holding B.V.

                    

- EMC - LV

3 PAGE PLIANTE

2 FALTBLATT

6 FOLDEUDSIDE

5 HOJA DESPLEGABLE

AUKI TAITETTU SIVU

4 FOLD-OUT PAGE

> PIEGHEVOLE

u UTBRETTSIDE

1 UITVOUWBLAD

: INSTRUKCJĘ ROZŁOŻYC

= UTVIKNINGSSIDA

y ZADNJA STRAN ZGIBANKA

FIN

cover_SRE835E.indd 1 28-06-12 11:17

                            

                

1 LISEZ PRÉALABLEMENT LE MANUELD'UTILISATION.

2 EN CAS DE DOUTE, CONTACTEZ VOTRE REVENDEUR ZIBRO.

3 POUR LIRE, DÉPLIEZ LA DERNIÈRE PAGE.              3 POUR LIRE, DÉPLIEZ LA DERNIÈRE PAGE.             

AFNOR CERTIFICATION - 11, RUE FRANCIS DE PRESSENSE

93571 LA PLAINE SAINT-DENIS CEDEX

FICHE INFORMATIVE

NF 128 02 / 02

La marque NF garantit

la qualité de cet article

suivant les normes françaises

et Règles de certification

de l’application NF 128

CONFORME A LA NORME NF D 35-300 ET AUX SPECIFICATIONS

COMPLEMENTAIRES DEFINIES PAR LES REGLES

DE CERTIFICATION DE LA MARQUENF 128

PRINCIPALES CARACTERISTIQUES CERTIFIEES:

• Sécurité du dispositif d’allumage

• Débit calorifique

• Efficacité des dispositifs de sécurité

• Stabilité

• Contrôle de la teneur en NOx dans les produits de combustion

• Contrôle de la qualité de la combustion (absence de CO)

• Endurance

• Intermittence

CONSEILS D’UTILISATION ET D’ENTRETIEN

Se reporter à la notice jointe à l’appareil et à la plaque de sécurité sur

l’appareil

Référence et numéro de lot ou de série de l’article : se reporter au produit

Distributed in Europe by:

PVG Holding B.V.

P.O.Box 96, 5340 AB OSS

Pays-Bas Tél.: +31 (0) 412 694670

Si une difficulté subsistait, vous pouvez écrire à

CERTITA

39/41, rue Louis Blanc

92400 COURBEVOIE

En cas d’insatisfaction, consultez d’abord votre revendeur :

cover_SRE835E.indd 5 28-06-12 11:17

Dear Sir, Madam,

Congratulations with your purchase of the Zibro, the number one brand among

movable heaters. You have purchased a first-class quality product, which will

serve you for many years to come. This, of course, provided you use the heater

correctly. Please read these Directions for Use first, to ensure maximum lifetime

for your Zibro.

Your heater comes with a 48-month manufacturer’s warranty on all defects in

material or workmanship.

We wish you much warmth and comfort with your Zibro.

Yours sincerely,

PVG Holding b.v.

Customer Service Department

1 READ THE DIRECTIONS FORUSE FIRST.

2 IN CASE OF ANY DOUBT, CONTACT YOUR ZIBRO DEALER.

3 BEFORE YOU START READING, FOLD OUT THE LAST PAGE.          

                       

p052_061_SRE835E_uk.indd 52 28-06-12 11:22

GENERAL DIRECTIONS FOR USE

Below you will find the main steps to be taken for

using your Zibro. For more details, please refer to the

MANUAL (pages 53 ff.).

•As a fire precaution, the tank must be filled either

when the heater has been switched off or in an-

other room than the room where the heater is in-

stalled.

•Always ensure that the tank is closed properly af-

ter filling it at a safe distance from all sources of

heat and open flames (see chapter B).

•Store all fuel containers with their original caps

and seals in a cool and dark place.

•Fuel ages. Use new fuel at the start of every heat-

ing season.

•The use of Zibro Premium Quality Fuels as a heat-

ing fuel assures you that you have a good quality

fuel.

•Before changing brands and/or types of fuel make

sure that the mobile heater first completely emp-

ties all of the remaining fuel inside the heater.

1 READ THE DIRECTIONS FORUSE FIRST.

2 IN CASE OF ANY DOUBT, CONTACT YOUR ZIBRO DEALER.

3 BEFORE YOU START READING, FOLD OUT THE LAST PAGE.          

Remove all packaging materials (Fig. A).

Fill the removable tank  (refer to Section B, Fig. D).

Insert the plug into the wall-socket.

Ignite the heater using the key (refer to Section D).

If required, change the temperature using the adjustment keys

(refer to Section E).

Switch off the heater by pressing the key .

MAIN COMPONENTS

Front plate

Grid

Base plate

Lid for removable

tank

Operation panel

Handle

Removable tank

Air filter

Vent filter

Thermostat

Plug + cord

Information display

key

Childproof lock

Adjustment keys

(time and

temperature)

TIMER

SAVE key

Indicator lights

EXTENSION

Air quality control

system









































                       

p052_061_SRE835E_uk.indd 53 28-06-12 11:22

This transportation cap

is packed separately in

the box. Only this cap

ensures trouble-free

transportation of the

heater after use.

Store it well!

Only the use of the

correct fuel will ensure

safe, efficient, and

comfortable use of your

Zibro.

WHAT YOU NEED TO KNOW IN ADVANCE

ALWAYS MAKE SURE THAT THERE IS SUFFICIENT VENTILATION

Read this user manual carefully before using the appliance and keep it for future

reference. Install this device only when it complies with local/national legislation,

ordinances and standards. This product is intended to be used as a heater in resi-

dential houses and is only suitable for use in dry locations, in normal household

conditions, indoors in living room, kitchen and garage.

This heater is equipped with an air quality control system . When there is insuf-

ficient ventilation in the room or when the heater is being used in a room which is

too small, the heater will shut off automatically. For comfortable and safe heating

ensure that there is sufficient ventilation.

Note: To avoid unexpected shut off, we recommend to put a door or window ajar

when the heater is operating.

Regardless of the model, you must always make sure that the heater is used in a

room large enough to enable the heater to be used safely without extra ventila-

tion. If the room is smaller than required, you must always open a door or window

slightly (ensuring an opening of approx. 2.5 cm). It is important that every room

where the heater is used has sufficient air intake and efficient air outflow (both

openings must have a minimum cross section of 50 cm2). No modifications to the

safety system are allowed, as that will invalidate the guarantee that the air probe

will work properly. Consult your dealer in case of doubt.

Especially for France: Your heater was designed to operate exclusively on fuel for

liquid fuel-operated mobile heaters in accordance with the Decrees of 08-01-1998

and 18-07-2002. The use of other fuels is forbidden. Ask your dealer or check our

website for the addresses of our retailers. The liquid fuel-operated mobile heater

is intended as an extra heater, and not as a continuous source of heat.

Especially for United Kingdom: Only use Class C1 paraffin fuel in accordance with

BS2869; Part 2, or equivalent.

The user must comply with the following instructions for proper use: DO NOT

- use the liquid fuel-operated mobile heater in caravans, boats, and vehicle cab-

ins;

- use the liquid fuel-operated mobile heater in insufficiently ventilated rooms

(consult the table of properties for the minimum dimensions of the room to

be heated), underground rooms and / or at a height of over 1500 metres;

- modify the heater safety features.

The use of this type of heating in public rooms is subject to prior regulatory per-

mission. Obtain proper information on this in advance.

THE RIGHT FUEL

Your Zibro heater has been designed for use with high-quality water-free pure

paraffin oil, such as Zibro Premium Quality Fuels. Only fuels of this kind will ensure

clean and proper burning. Lower quality fuel may result in:

increased possibility of malfunctioning

incomplete burning

reduced heater lifetime

smoke and/or smells

deposits on the grid or mantle

p052_061_SRE835E_uk.indd 54 28-06-12 11:22

     

Using the right fuel is therefore essential for safe, efficient, and comfortable use

of your heater.

Damage and/or malfunctions of the heater due to the use of other than high qual-

ity water-free pure paraffin oil is not covered by the warranty.

Always refer to your local Zibro dealer for the right fuel for your heater.

MANUAL

AINSTALLING THE HEATER

1Carefully remove your Zibro from the box and check the contents.

In addition to the heater you also need to have:

a manual fuel pump

a transportation cap

these directions for use

Keep the box and the packaging materials (Fig. A) for storage and/or transporta-

tion.

2Open the lid of the removable tank and remove the piece of cardboard.

3Fill the removable tank as indicated in Section B.

4The floor should be firm and completely level. Reposition the heater, when it

is not level. Do not try to correct the situation by placing books or other

goods under the heater.

5Insert the plug into the wall-socket (230 Volts - AC / 50 Hz) and set the

correct time using the adjustment keys  (refer to Section C).

6Your Zibro is now ready for use.

p052_061_SRE835E_uk.indd 55 28-06-12 11:22

F: When the 4-digit stops

blinking, the setting has

been locked to the indi-

cated value.

empty full

BFILLING FUEL

Fill the removable tank in a suitable place since there can always be some spillage.

Follow the procedure below:

1Make sure that the heater is switched off.

2Open the upper lid and lift the removable tank out of the heater (Fig. B).

Note: Some drops may leak from the tank. Put down the removable tank (cap

pointing upwards, handle on floor (Fig. C) and screw off the fuel cap.

3Fill the removable tank using a fuel pump (refer to fuel pump operation

instructions.) Make sure that it is in a higher position than the removable tank

(Fig. D). Insert the ribbed hose into the opening of the removable tank.

4Check the removable tank fuel gauge while filling the tank (Fig. E). Stop fill-

ing once the gauge indicates that the tank is full. Never overfill the tank,

especially not when the fuel is very cold (fuel expands when it heats up).

5Let the remaining fuel in the pump flow back into the jerry can and carefully

remove the pump. Carefully screw the fuel cap back on the tank. Clean off

any spilled fuel.

6Check whether the fuel cap is straight and tightened properly. Reinstall the

removable tank in the heater (cap down). Close the lid.

CSETTING THE CLOCK

It is only possible to set the correct time, when the heater is connected to the

mains and not burning. Use the adjustment keys to set the time. First press

either of the two keys to switch on the function (the 4-digit  will start blinking).

Next, set the hours using the key (hour) and the minutes using the key (min.).

Press once to increase the value by one step. When you hold down the key, the

value will continue going up, until you release the key again. After approximately

10 seconds the 4-digit will stop blinking and the setting will be locked. 5 minutes

after switching off the heater, the information on the display will disappear and

the heater will automatically switch into the stand-by position.

When the heater has been unplugged for more than 10 minutes (or after a

power failure), the time needs to be set again.

DIGNITING THE HEATER

When used for the first time, a new heater may give out a smell for a short while.

You should therefore provide extra ventilation.

Always ignite the heater with the button



. Never use matches or a cigarette

lighter.

Just press the button to ignite the heater.

The

button will start blinking, indicating that the ignition procedure has start-

ed. This will take a short while. Once the heater is burning, the button  will

remain lit (red). The information display will show two numbers (Fig. G). The

actual room temperature is indicated below ROOM, while the temperature setting

is indicated below SET. The latter can be changed with the adjustment keys (refer

to Section E).

Prior to igniting the heater, always check for sufficient fuel in the removable tank.

p052_061_SRE835E_uk.indd 56 28-06-12 11:22

G: The required tem-

perature on the left, the

measured temperature

on the right.

H: The TIMER indicator

light indicates that the

timer function has been

switched on.

ESETTING THE REQUIRED TEMPERATURE

The temperature setting can only be adjusted, when the heater is burning. Use the

adjustment keys to adjust the temperature. First press either of the two keys to

switch on the function (the °C mark and 4-digit  will start blinking). Next, adjust

the temperature using the key (min.) to set the temperature to a higher setting

and the key (hour) to lower the temperature. Press once to increase the value

one step. After approximately 10 seconds the °C mark and 4-digit will stop blink-

ing and the setting will be locked (Fig. F).

The available temperature settings range from 6°C minimum to 28°C maximum.

When the heater has been unplugged for more than 10 minutes (or after a power

failure), the temperature will reset to the factory setting of 20°C.

FUSING THE TIMER

The timer allows you to switch on the heater automatically at a preset time.

In order to switch on the timer, the correct time must have been set (refer to

Section C) and the heater should be off. Follow the procedure below:

1Press the button and then the TIMER key immediately after that.

The TIMER light and the information display will start blinking.

2Use the adjustment keys to set the time at which the heater must ignite.

Use the key (hour) to set the hours and the key (min.) to set the minutes

(interval of 5 minutes).

3After approximately 10 seconds the information display will show CLOCK

again and the TIMER indicator light will light up, indicating that the timer

function has been activated (Fig. H).

4The timer will ensure that the room will have been heated to approximately

the required temperature at the set time.

When you want to switch off the heater and ignite it again with the timer, all

you have to do is press the TIMER key (refer to Section G).

Press the button once to clear the timer setting.

GSWITCHING OFF THE HEATER

There are two ways to switch off the heater.

1Press the button . The information display will show the CLOCK

signal. Within approximately one minute the flame will have extinguished.

2Press the TIMER key , when you want to switch off the heater and ignite it

again with the timer the next time. This not only switches off the heater, but

it also activates the timer function. Y

ou can change the required time with the

adjustment keys (refer to Section F).

p052_061_SRE835E_uk.indd 57 28-06-12 11:22

I: When the mark

appears, the childproof

lock has been activated.

In case of any malfunc-

tioning the information

display will tell you what

is the matter.

HTHE INFORMATION DISPLAY

The information display not only serves as an indicator of the (set) time and

temperature (Sections C, E, and F), it also indicates any malfunctioning of the

heater. The code on the information display tells you what is the matter:

CODE INFORMATION WHAT TO DO

e - 0 Temperature within the heater too high. Cool-down and re-ignite.

f - 0 Power interrupted. Re-ignite the heater.

e - 1 Faulty thermostat. Contact your dealer.

f - 1 Faulty burner thermistor. Contact your dealer.

e - 2 Starting problems. Contact your dealer.

e - 5 Tipping-over protection. Re-ignite the heater.

e - 6 Poor burning. Contact your dealer.

e - 7 Room temperature If necessary,

above 32°C. re-ignite the heater.

e - 8 Defective booster. Contact your dealer.

e - 9 Air filter dirty; or Clean filter

Fuel pump dirty. Contact your dealer.

The heater has been in operation

continuously for a period of 69 hours

and has turned itself off automatically. Switch the heater back on.

-- : -- +

Out of fuel. Refill removable tank.

-- : -- + Too little ventilation. Ventilate better.

e - 1 1 +Too little ventilation. Ventilate better.

Always contact your dealer for any malfunctioning not listed above and/or when

the error keeps occurring after taking the corrective measure as described above.

AUTOMATIC DEACTIVATION

This heater is fitted with a safety system that ensures that it switches off automati-

cally after 69 hours continuous operation. The following will then appear in the

display: . If desired, you can switch the heater on again by pressing the

button  (see Section D).

AUTOMATIC CLEANING MODE

When the heater has been burning continuously for two hours at its highest set-

ting, the burner will automatically start an autoclean procedure. The display will

show the autocleaning code cl:05 running back to cl:01. The procedure takes 5

minutes, during which the heater will burn at its lowest setting, while the burner

autocleans. When the burner is clean again, the heater will automatically switch

back to the highest setting again.

ICHILDPROOF LOCK

The childproof lock can be used to prevent children accidentally changing the heat-

er settings. When the heater is burning and the childproof lock is on, the heater can

only be switched off. Other functions are blocked then. If the heater has already

been switched off, the childproof lock also prevents accidental ignition of the

heater.

Activate the childproof lock by pressing the appropriate key and holding

it down for more than 3 seconds. The KEY-LOCK indicator

()

will appear on the

information display (Fig. I), indicating that the childproof lock has been activated.

Switch off the childproof lock by pressing the key and holding it down for more

than 3 seconds once again.

p052_061_SRE835E_uk.indd 58 28-06-12 11:22

Table of contents

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide