ZEPP Z A1934 User manual
Product Manual
Zepp Z
A1934
Smartwatch with the band × 1 Charging base × 1 Instruction Manual × 1
01 Package Contents
1
Note:
Press and hold the crown to turn on the watch. If the watch cannot be turned on, please charge it and
then try again.
Optical heart rate/
Blood oxygen sensor
Upper button/
Front electrode
Crown
Touch
screen
Lower button
Microphone
Rear electrode
02 About the Watch
2
Note:
1.
2.
3.
For a better user experience, please use the most recent version of the App.
The operating system needs to be Android 5.0, iOS 10.0, or above.
Do not pair the watch directly using your mobile phone’s Bluetooth. Follow the
steps in the app to pair your watch correctly.
03 Pairing the Watch
1.
2.
3.
4.
Scan the QR code on the Instruction Manual with your mobile phone to download the app to your mobile
phone. You can also download the latest version of App from the Google Play Store or Apple App store.
Open the APP, register an account and log in.
Follow the steps in the app to pair your watch correctly. Once the pairing is done, the watch will display
the correct time.
You can set the other watch functions as needed.
3
Download Zepp App
Note:
1.
2.
Please use the charging base that comes with the watch. Make
sure that the charging base is dry before charging.
Please use a 1A power adapter.
1.
2.
3.
Connect the watch's charging cable to a power adapter or a computer's USB port.
Place the bottom of the watch on the charging base.
When charging starts, the watch screen displays the charging progress.
04 Charging the Watch
4
05 Disassembly and Assembly of the Watch Strap
Please refer to the illustrations to disassemble or assemble the watch strap.
Note:
Once the strap is assembled, pull the strap properly to ensure it is installed successfully.
5
06 Wearing
1.
2.
3.
Wear the watch strap not too tight or too loose, and leave enough space for the skin to breathe. This
makes you feel comfortable and allows the sensor to function.
When measuring blood oxygen saturation, wear the watch correctly. Avoid wearing the watch on the
wrist joint, keep your arm flat, maintain comfortable (appropriately tight) fitting between the watch and
the wrist skin, and keep your arm still throughout the measurement process. When affected by external
factors (arm sag, arm sway, arm hair, tattoo, etc.), the measurement result may be inaccurate or the
measurement may fail with no output.
We recommend that you tighten the watch strap during exercise and loosen it afterwards.
6
Product model: A1934
Input: 5 V d.c. 1 A MAX
Bluetooth Frequency: 2400–2483.5 MHz
Water resistance rating: 5 ATM
Device requirements: Devices installed with Android 5.0 or iOS 10.0 or above OS versions
View product certification information on the watch's Settings > System > Regulation page.
The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Anhui Huami Information Technology Co., Ltd. is under license. Other trademarks
and trade names are those of their respective owners.
07 Basic Parameters
7
Bluetooth version: BLE V5.0
BLE output power: <5 dBm
Operating temperature: 0°C to 45°C
08 Regulatory Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
2.
FCC ID: 2AWQ5A1934
Any changes or modifications that are not expressly approved by the party responsible for the
compliance may void the user’s authority to operate the device.
8
This device may not cause harmful interference, and
This device must accept any interference received, including the interference that may cause
undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
9
This manual suits for next models
1
Table of contents
Other ZEPP Watch manuals
