Zenty ZT-116 User manual
(844) 200-1945 | [email protected] Page 4of 27 Copyright © Zenty AV
The ZT-MT88EA is a professional UHD 4K HDBaseT Matrix used for audio/video distribution.
Supporting 8 HDMI inputs, 1 HDMI outputs along with 7 HDBaseT extension outputs, users can
extend and distribute 4K signals up to 131ft., and 1080P signals up to 230ft. Each of the 7
HDBaseT receivers also support 2 HDMI outputs so that users can connect 2 displays to each
receiver for maximum flexibility. All of the HDBaseT receivers are powered by the main transmitter
box via Power over Cable function, helping remove the need for additional power supplies, and
ensuring a clean and neat setup. Manage signal routing and EDID via various control methods, such
as front panel buttons, RS232, IR remote, web interface, and Zenty mobile app. RS232 control port
allows for easy integration with 3rd party control systems. Save up to 8 fully customizable routing
presets for easy operation.
•Incorporates HDBaseT technology
•HDMI 2.0 version supports 4K@60Hz YUV4:4:4, 18G, HDR10
•Route any one of the 8 HDMI Sources to any one of the 8 HDMI Displays
•8 outputs (includes 7*HDBaseT output and 1*HDMI output)
•Transmit up to 230ft. under 1080p, 131ft. under 4K@60Hz
•HDCP 2.2/1.4 compliant
•Wide-band Bi-Direction IR routed control (38~56KHz)
•1 x Analog Audio and 1 x SPDIF Audio extraction output
•Supports RS232 Pass Through
•Front Panel Button with LCD, IR Routing, RS232, TCP/IP, PC Tool Control
•PoC (Receivers powered by HDBaseT Matrix)
•1U rack design with mounting ears
•AC 110V~220V/50HZ/60HZ input
(844) 200-1945 | [email protected] Page 5of 27 Copyright © Zenty AV
•(1) x Main Unit (HDBaseT Matrix) and 7x Receivers
•(1) x Power Cable
•(1) x Remote control
•(16) x IR Transmitter cables, 16x Wide-Band IR Receiver cables
•(1) x CD for control software & user manual
Operating Temperature Range
-5°C ~ 40°C (23°F ~ 104°F)
Storage Temperature Range
-10°C ~ 60°C (-14°F ~ 140°)
Operating Humidity Range
5 –90% RH (No condensation)
Input Video Signal
0.5 –1.0 volts p-p
Input DDC Signal
5 volts p-p (TTL)
Bandwidth
18Gbps
Video Format Support
4K 60HZ YUV 4:4:4
4K 30Hz, 1080P / 1080i / 720P / 576P /
480P / 576i / 480i
HDCP Compliance
1.4 | 2.2
Video Output
HDMI 2.0 | HDMI 1.4 (Over HDBaseT and
HDMI)
Audio Format Support
PCM, Dolby 5.1, DTS 5.1 digital audio
Maximum Transmission Distance
1080P: 230ft. | 4K: 131ft.
Power Consumption
100W (Max)
Dimensions (L x W x H)
480mm x 348mm x 44mm
18.90” x 13.70” x 1.73”
Net Weight
8.82 lbs.
(844) 200-1945 | [email protected] Page 7of 27 Copyright © Zenty AV
The signal switch includes 8 free switching channels, which can be configured as input/output
according to the requirements, forming a matrix of 1 x 8 ~ 8 x 1, which can switch any input.
Signal to 1 channel output or all channel output.
The specific operation is as follows:
(844) 200-1945 | [email protected] Page 8of 27 Copyright © Zenty AV
Switch the input to the output
Operation format: "output channel" + "input channel"
For Example: Output port 2,5,8 switch to input 7
Operation: Press OUT number "2" "5" "8" + IN number "7" to complete the switch
The video interface has two sub menus:
1. Video Switch
2. Video On/Off
The specific operation is as follows:
1. Video Switch:
Switching any output to one input or all outputs to the same input
①Select “Video”in the menu and press “ENTER”
②Then use “UP”, ”DOWN”button to select “Switching”
③Press “ENTER”enter next page
④Press “UP”, ”DOWN”button to select the output (The ninth port means ALL）
⑤Press “ENTER”
⑥Press “UP”, ”DOWN”to select the input
⑦Press “ENTER”, switching is done
(844) 200-1945 | [email protected] Page 9of 27 Copyright © Zenty AV
2.Video On/Off
Turn on/off any output video or all outputs video
①Select “Video”in the menu and press “ENTER”
②Then use “UP”, ”DOWN”button to select “On/Off”
③Press “ENTER”enter next page
④Press “UP”, ”DOWN”button to select the output (The ninth port means ALL）
⑤Press “ENTER”
⑥Press “UP”, ”DOWN” to select “On” or “Off”
⑦Press “ENTER”, switching is done
(844) 200-1945 | [email protected] Page 10 of 27 Copyright © Zenty AV
The Audio Control has NINE sub menus:
1. Out 1 ~ Out 8
2. Mute (Default)
The specific operation is as follows:
Audio interface can be set to output Audio (Analog or SPDIF), then choose Audio output or mute
Operating instructions:
Select "Audio" from the main menu and press "ENTER" to confirm
Press the up and down buttons to select "Out" or "Mute" and press "ENTER" to confirm the.
The bottom of the selected state will turn white with white dots at the back
This manual suits for next models
1
