Zenoah EBZ8560 User manual
EBZ8560, EBZ8560RH
EN Operator's manual 2-17
JA 取扱説明書 18-33
KO 사용자 설명서 34-49
ZH-TW 操作手冊 50-64
Contents
Introduction............................................................... 2
Safety........................................................................3
Assembly.................................................................. 8
Operation................................................................ 10
Maintenance........................................................... 12
Transportation, storage and disposal......................15
Technical data.........................................................16
Warranty................................................................. 17
Introduction
Product description
This product is a backpack blower with a fuel engine.
We have a policy of continuous product development
and therefore reserve the right to modify the design
and appearance of products without prior notice.
Intended use
Use the product to blow leaves and other unwanted
material from areas such as lawns, pathways and
asphalt roads.
Product overview
EBZ8560
3425
24
8
9
7
2
1
5
6
15 16
11
26
12
10
17
18
11
19 18
23
22
20
13
15
14
21
1. Frame
2. Harness
3. Engine cover
4. Fan housing
5. Air intake screen
6. Fan
7. Air filter
8. Starter rope handle
9. Fuel tank
10. Spark plug
11. Vibration damping system
12. Choke control
13. Handle
14. Stop switch with throttle position adjustment
15. Throttle trigger/Throttle lever
16. Stop switch
17. Pipe angle
18. Clamp
19. Flexible hose
20. Control pipe
21. Cable clamp
22. Intermediate pipe
23. Standard nozzle
24. Operator's manual
22142 - 005 - 06.07.2023
25. Combination wrench
26. Handle
Symbols on the product
WARNING! This product is dangerous.
Injury or death can occur to the
operator or bystanders if the product
is not used carefully and correctly.
To prevent injury to the operator or
bystanders, read and obey all safety
instructions in the operator's manual.
Read the operator's manual carefully
and make sure that you understand the
instructions before use.
Use approved hearing protection
and approved eye protection. If the
environment contains dust, use a
breathing mask.
Severing of fingers or hand by fan
blade.
Use approved protective gloves.
Mixture of gasoline and two-stroke oil.
Air purge bulb.
Keep all parts of your body away from
hot surfaces.
Choke, open position.
Choke, close position.
Look out for thrown ob-
jects. Thrown objects
can cause serious injury.
Use personal protective
equipment.
Keep a safety distance
at a minimum of 15 m to
persons or animals.
yyyywwxxxxx The rating plate or the
laser printing shows the
serial number. yyyy is
the production year and
ww is the production
week.
Note: Other symbols/decals on the product refer
to certification requirements for other commercial
areas.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not
from the manufacturer or not approved by the
manufacturer.
• the product is not repaired at an approved
service center or by an approved authority.
Safety
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a
risk of injury or death for the operator
or bystanders if the instructions in the
manual are not obeyed.
CAUTION: Used if there is a risk of
damage to the product, other materials
or the adjacent area if the instructions in
the manual are not obeyed.
Note: Used to give more information that is
necessary in a given situation.
2142 - 005 - 06.07.2023 3
General safety instructions
WARNING: Read the warning
instructions that follow before you use
the product.
• Under no circumstances may the design of the
product be modified without the permission of the
manufacturer. Always use genuine accessories.
Non-authorized modifications and/or accessories
can result in serious personal injury or the death
of the operator or others.
• Never use a product that has been modified in
any way from its original specification.
• Never use a product that is faulty. Carry out
the safety checks, maintenance and service
instructions described in this manual. Some
maintenance and service measures must be
carried out by trained and qualified specialists.
Refer to
Maintenance schedule on page 13
for
instructions.
• All servicing and repair work on the product
requires special training. This is especially true of
the safety equipment. Never use a product with
faulty safety equipment. If your product fails any
of the checks described in this operator's manual
you must contact your service agent. The safety
equipment of the product must be maintained
as described in this operator's manual. When
you buy any of our products we guarantee the
availability of professional repairs and service.
If the retailer who sells your product is not a
servicing dealer, ask him for the address of your
nearest service agent.
Safety instructions for operation
WARNING: Read the warning
instructions that follow before you use
the product.
• This product is a dangerous tool if used
carelessly or incorrectly and can cause serious,
even fatal injuries. It is extremely important that
you read and understand the contents of this
operator’s manual.
• Long-term exposure to noise can result in
permanent hearing impairment. Always use
approved hearing protection.
• Do an overall inspection of the machine before
use. Refer to
Maintenance schedule on page
13
.
• Never use the machine if you are tired, if
you have drunk alcohol, or if you are taking
medication that could affect your vision, your
judgement or your coordination.
• Wear personal protective equipment. Refer to
Personal protective equipment on page 5
.
• All covers and guards must be fitted before
starting. Ensure that the spark plug cap and
ignition lead are undamaged to avoid the risk of
electric shock.
• The blower operator must make sure that no
bystanders or animals come nearer than 15 m.
Whenever several operators are working in the
same work area, they should maintain a safe
distance of at least 15 m from one another.
• Never allow children to operate the machine.
Never allow anyone else to use the machine
without first ensuring that they have read
and understood the contents of the operator’s
manual.
• Always check for any objects that may block the
air intake screen before beginning work.
• Never remove the air intake screen.
• In case of emergency, release the harness
from both shoulders and let the machine fall
backwards.
• Always contact local authorities and make sure
you are following applicable directives.
• Keep all parts of your body away from hot
surfaces.
• Never start the machine indoors. Exhaust fumes
can be dangerous if inhaled.
• Observe and be aware of the surroundings.
Ensure that no people or animals can come into
contact with the product. If anyone approaches
your work area, set the throttle control to the
lowest throttle until the person is at a safe
distance. Direct the product away from people,
animals, play areas, open windows and cars
etc. No unauthorised persons or animals may be
present in the working area, which is 15 metres.
• Overexposure to vibration can lead to circulatory
damage or nerve damage in people who have
impaired circulation. Contact your doctor if
you experience symptoms of overexposure to
vibration. Such symptoms include numbness,
loss of feeling, tingling, pricking, pain, loss of
strength, changes in skin colour or condition.
These symptoms normally appear in the fingers,
hands or wrists. The risk increases at low
temperatures.
• Engine exhaust fumes contain carbon monoxide,
which can cause carbon monoxide poisoning.
For this reason you should not start or run
the product indoors, or anywhere that is poorly
ventilated. The exhaust fumes from the engine
are hot and may contain sparks which can start
a fire. Never start the product indoors or near
combustible material.
• Allow the engine to cool before refueling.
42142 - 005 - 06.07.2023
• The powerful currents of air can move objects
at such a speed that they can bounce back and
cause serious eye injuries.
• Do not direct the air jet towards people or
animals.
• Do not use the machine in bad weather, such as
dense fog, heavy rain, strong wind, intense cold,
etc. Working in bad weather is tiring and can lead
to dangerous conditions, e.g. slippery surfaces.
• Minimize the time of operation by lightly wetting
dusty areas or using spray equipment.
• Make sure you can move and stand safely.
Check the area around you for possible
obstacles (roots, rocks, branches, ditches, etc.)
in case you have to move suddenly. Take great
care when working on sloping ground.
• Never put the product down with the engine
running unless you have it in clear sight.
• Never operate the product from ladders or high
places (such as roofs), it is prohibited and could
result in severe injury.
• Do not use the product unless you are able to
call for help in the event of an accident.
• Watch out for thrown objects. Always wear eye
protection. Stones, rubbish, etc. can be thrown
up into the eyes causing blindness or serious
injury. Keep unauthorised persons at a distance.
Children, animals, onlookers and helpers should
be kept outside the safety zone of 15 m. Stop the
machine immediately if anyone approaches.
• Do not operate the product if the exhaust gas
outlet on the engine cover is covered by a wall
and/or some other obstacles. The product could
get damaged. Make sure that the distance is 50
cm or more from the obstacles during operation.
• Always stop the engine before cleaning.
• Always move the product away from the refueling
area and source before starting. Place the
product on a flat surface.
• The product may only be started in its complete
design. If the product is started without all the
guards fitted there is a risk of personal injuries.
Personal protective equipment
WARNING: Read the warning
instructions that follow before you use
the product.
• Always use approved personal protective
equipment when you use the product. Personal
protective equipment cannot fully prevent injury
but it decreases the degree of injury if an
accident does occur. Let your dealer help you
select the right equipment.
• Use approved hearing protection.
2142 - 005 - 06.07.2023 5
• Use approved eye protection. If you use a visor,
you must also use approved protective goggles.
Approved protective goggles must agree with the
ANSI Z87.1 standard in the USA or EN 166 in
EU countries.
• Use gloves when it is necessary, for example,
when you examine or clean the product.
• Use protective boots, or shoes, with non-slip
soles.
• Use clothing made of a strong fabric. Always
use heavy, long pants and long sleeves. Do not
use loose clothing that can catch on twigs and
branches. Do not wear jewelry, short pants, open
shoes or go with bare feet. Put your hair up
safely above your shoulders.
• Use breathing protection when there is a risk of
dust.
• Keep first aid equipment close at hand.
Safety devices on the product
WARNING: Read the warning
instructions that follow before you use
the product.
In this section the product’s safety features, its
purpose and how checks and maintenance should
be carried out to ensure that it operates correctly.
See instructions under the heading
Product overview
on page 2
to find where these parts are located on
your product.
The life span of the product can be reduced
and the risk of accidents can increase if product
maintenance is not carried out correctly and
if service and/or repairs are not carried out
professionally. If you need further information please
contact your nearest servicing dealer.
WARNING: Never use a product
with damaged safety components. The
product's safety equipment must be
inspected and maintained as described
in this section. If your product fails any of
these checks, contact your service agent
to get it repaired.
CAUTION: All servicing and repair
work on the machine requires special
training. This is especially true of
the machine′s safety equipment. If
your machine fails any of the checks
described below you must contact your
service agent. When you buy any of our
products we guarantee the availability of
professional repairs and service. If the
retailer who sells your machine is not a
servicing dealer, ask him for the address
of your nearest service agent.
To do a check of the muffler
WARNING: Do not use a product
with a damaged muffler.
WARNING: The muffler becomes
very hot during and after operation, also
at idle speed. Use protective gloves to
prevent burn injuries.
The muffler keeps noise levels to a minimum and
sends exhaust fumes away from the operator.
62142 - 005 - 06.07.2023
1. Stop the engine.
2. Do a visual check for damage and deformation.
Note: The inner surfaces of the muffler contain
chemicals that can cause cancer. Be careful
not to touch these elements if the muffler is
damaged.
3. Make sure that the muffler is correctly attached
to the product. Tighten the screws to 8–12 Nm.
4. Examine the spark arrester screen, do a visual
check.
a) Replace the spark arrester screen if it is
damaged.
b) Clean the spark arrester screen if it is
blocked. Refer to
To do maintenance of the
muffler on page 14
for more information.
Vibration damping system
The product has a vibration damping system that
decreases vibrations and makes operation easier.
Examine the vibration damping system and make
sure that it is not damaged. Make sure that the
vibration damping system is attached correctly.
x2
Air filter
Do not use the product without an air filter or if the
air filter is damaged or has a deformation.
Stop switch
Use the stop switch to stop the engine. Make sure
that the engine stops fully.
Harness safety
Always use the harness when you operate the
product. If you do not use the harness, you cannot
operate the product safely. This can result in injury to
you or other persons. Make sure that the straps are
attached and correctly adjusted. There is a risk that
an straps that are loose can go into the fan of the
product.
Fuel safety
WARNING: Read the warning
instructions that follow before you use
the product.
• Do not mix the fuel indoor or near a heat source.
• Do not start the product if there is fuel or engine
oil on the product. Remove the unwanted fuel/oil
and let the product dry. Remove unwanted fuel
from the product.
• If you spill fuel on your clothing, change clothing
immediately.
• Do not get fuel on your body, it can cause injury.
If you get fuel on your body, use a soap and
water to remove the fuel.
• Do not start the engine if you spill oil or fuel on
the product or on your body.
• Do not start the product if the engine has a leak.
Examine the engine for leaks regularly.
• Be careful with fuel. Fuel is flammable and the
fumes are explosive and can cause injuries or
death.
• Do not breathe in the fuel fumes, it can cause
injury. Make sure that there is sufficient airflow.
2142 - 005 - 06.07.2023 7
• Do not smoke near the fuel or the engine.
• Do not put warm objects near the fuel or the
engine.
• Do not add the fuel when the engine is on.
• Make sure that the engine is cool before you
refuel.
• Before you refuel, open the fuel tank cap slowly
and release the pressure carefully.
• Make sure there are sufficient airflow when
refueling and mixing fuel (petrol and two-stroke
oil) or draining the fuel tank.
• Fuel and fuel vapor are highly flammable and
can cause serious injury when inhaled or allowed
to come into contact with the skin. For this
reason, observe caution when handling fuel and
make sure there is sufficient airflow.
• Tighten the fuel tank cap carefully or a fire can
occur.
• Move the product at a minimum of 3 m (10 ft)
from the position where you filled the tank before
a start.
• Do not put too much fuel in the fuel tank.
• Make sure that a leak cannot occur when you
move the product or fuel container.
• Do not put the product or a fuel container where
there is an open flame, spark or pilot light. Make
sure that the storage area does not contain an
open flame.
• Only use approved containers when you move
the fuel or put the fuel into storage.
• Empty the fuel tank before long-term storage.
Obey the local law on where to dispose fuel.
• Clean the product before long-term storage.
• Remove the spark plug cap before you put the
product into storage to make sure that the engine
does not start accidentally.
Safety instructions for maintenance
WARNING: Read the warning
instructions that follow before you use
the product.
• Your warranty may not cover damage or liability
caused by the use of non-authorized accessories
or replacement parts.
• The inside of the muffler contains chemicals that
may be carcinogenic. Avoid contact with these
elements in the event of a damaged muffler.
• Stop the engine before assembling or
dismantling accessories or other parts.
• Check that the thick round pin (A) is inserted in
the strap. If it is inserted incorrectly it may lead to
personal injury.
A
Assembly
Introduction
WARNING: Read and understand
the safety chapter before you assemble
the product.
To assemble the tube and handle on
the product (EBZ8560RH)
1. Attach the flexible hose (A) to the pipe angle and
the control pipe (B) with the clamps (C), (D).
B
D
A
C
Note: Lubricate the control pipe and the
flexible hose to make them more easy to
assemble.
2. Attach the handle (E) to the control pipe and put
the knob through the handle.
E
3. Tighten the knob.
82142 - 005 - 06.07.2023
4. Attach the cable to the flexible hose with the
cable clamp.
5. Attach the intermediate pipe to the control pipe.
6. Attach the blower nozzle to the intermediate
pipe.
To assemble the tube and handle on
the product (EBZ8560)
1. Attach the flexible hose (A) to the pipe angle with
the clamp (C).
C
A
D
B
E
F
G
2. Push the handle (E) onto the control pipe (B)
.
3. Attach and tighten the bolt, washer and nuts as
shown in the illustration.
4. Attach the control pipe (B) to the flexible hose (A)
with the clamp (D). Make sure that the mark on
the control pipe is up.
5. Attach the intermediate pipe (F) to the control
pipe.
6. Attach the blower nozzle (G) to the intermediate
pipe.
2142 - 005 - 06.07.2023 9
7. Loosen the knob (H) to adjust the position of the
handle.
H
8. Tighten the knob again.
To adjust the harness
A correctly adjusted harness and product makes
operation easier.
1. Put on the harness of the product.
2. Tighten the side straps until the product is tight
against your body.
Operation
Introduction
WARNING: Read and understand
the safety chapter before you use the
product.
Fuel
To use fuel
CAUTION: This product has a two-
stroke engine. Use a mixture of gasoline
and two-stroke engine oil. Make sure
to use the correct quantity of oil in the
mixture. Incorrect ratio of gasoline and
oil can cause damage to the engine.
Gasoline
CAUTION: Do not use gasoline with
an octane number less than 90 RON
(87 AKI). This can cause damage to the
product.
CAUTION: Do not use gasoline with
more than 10% ethanol concentration
(E10). This can cause damage to the
product.
CAUTION: Do not use leaded
gasoline. This can cause damage to the
product.
• Always use new unleaded gasoline with a
minimum octane number of 90 RON (87 AKI)
and with less than 10% ethanol concentration
(E10).
• Use gasoline with a higher octane number if you
frequently use the product at continuously high
engine speed.
• Always use a good quality unleaded gasoline/oil
mixture.
Two-stroke oil
• For best results and performance use Zenoah
two-stroke oil, which is specially formulated for
our two-stroke engines.
• If Zenoah two-stroke oil is not available, you may
use another two-stroke oil of good quality that
is intended for air cooled engines.Contact your
dealer when you select an oil.
• Do not use two-stroke oil intended for water-
cooled outboard engines, also referred to as
outboard oil.
• Do not use oil intended for four-stroke engines.
Gasoline, litre Two-stroke oil, litre
2% (50:1)
5 0.10
10 0.20
15 0.30
20 0.40
To make the fuel mixture
Note: Always use a clean fuel container when you
mix the fuel.
10 2142 - 005 - 06.07.2023
This manual suits for next models
3
Table of contents
Languages:
Other Zenoah Blower manuals
Zenoah
Zenoah EBZ3000RH User manual
Zenoah
Zenoah HB2311EZ Instruction manual
Zenoah
Zenoah EBZ7001 Manual
Zenoah
Zenoah HBZ2600 User manual
Zenoah
Zenoah HB2302 User manual
Zenoah
Zenoah EBZ3000RH User manual
Zenoah
Zenoah EBZ3000RH User manual
Zenoah
Zenoah EBZ8001 User manual
Zenoah
Zenoah STRATO-CHARGED EBZ4800 User manual
Zenoah
Zenoah EBZ5100 Manual
Zenoah
Zenoah EBZ5100Q Manual
Zenoah
Zenoah EBZ7500 User manual
Zenoah
Zenoah HBZ2601-CA Manual
Zenoah
Zenoah EBZ5000 Owner's manual
Zenoah
Zenoah EB7000 User manual
Zenoah
Zenoah HB2301 Manual
Zenoah
Zenoah HBZ2601 User manual
Zenoah
Zenoah Zenoah EB4300 User manual
Zenoah
Zenoah Zenoah EB6200 User manual
Zenoah
Zenoah EBZ5100 User manual
