ZENDEX RAKJAK DBT2 Guide

Please careully cut out card along dotted lines, fill out information and mail.

30 29

Form Part Number 4040

Revised 05/16/07

4 Larson Drive ▪ Danbury, CT 06810 ▪ U.S.A.

Visit Our Web Site at www.zendextool.com

Lift load from Jack Pad only...

Lifting from top will damage top plate

and create an unsafe condition.

Be absolutely sure jack pad is

secure at lift point.

Sharp object puncturing

bag will release load without

warning.

Always place RAK JAK on a solid

flat surface. Base must be parallel

to lifting point to prevent uneven

jacking that may cause sudden drop

of load.

WARNING: With air line disconnected,

bag can be deflated by pressing either

the red or green arrow on the handle.

TO RAISE:

Push green arrow.

TO LOWER:

Push red arrow.

(See Illustrations below)

MODEL DBT2

Study, understand and follow all instructions before

operating this device.

Do not exceed rated capacity (2 tons).

Do not overinflate, maximum air pressure (105 p.s.i).

Lifting device only. Immediately after lifting, support

the vehicle with appropriate means.

Use only on hard level surface.

Keep hands away from jack pad at all times.

Lift only on areas of the vehicle as specified by the

vehicle manufacturer.

Only attachments and/or adaptors supplied by the

manufacturer shall be used.

Wear Safety goggles.

Avoid contact with petroleum based products or

chemicals of any kind.

Avoid sharp objects near bag. Bag penetration will

result in jack dropping without warning, which will

result in serious injury or property damage.

Failure to heed these markings may result in personal

injury or property damage.

Add a few drops of

pneumatic tool oil to air inlet

occasionally (monthly).

Visually inspect Rak Jak

before each use. Do not use

Rak Jak if you detect scars,

abrasions, rips or punctures in

air bag. If so, Rak Jak should be

returned to factory for inspection

and evaluation.

Return Address:

WARRANTY REGISTRATION CARD

Please return this warranty and product update registration.

Purchased from:

Purchaser:

Address:

City: State City

Acknowledged Signature Date

WARNING:

DO NOT

Remove

Brass Plug

AIR INLET:

Accepts

Your 1/4”

Brass Plug

MODEL DBT2

Other ZENDEX Lifting System manuals

ZENDEX

ZENDEX GO JAK G4107 User manual

Popular Lifting System manuals by other brands

morse

morse 82H-124 Operator's manual

Braun

Braun NL955 Series Operator's manual

haacon

haacon 1889.10 quick start guide

Protekt

Protekt AT 252 instruction manual

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 operating manual

Nova Technology International, LLC

Nova Technology International, LLC NAS Series quick start guide

Genie

Genie Z-60/34 Operator's manual

Screen Technics

Screen Technics INTERFIT Vertical Up Lift instructions

Mortuary Lift

Mortuary Lift ULTIMATE 1000 instructions

Custom Equipment

Custom Equipment Hy-Brid 3 Series MAINTENANCE & TROUBLESHOOTING MANUAL

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Maintenance and troubleshooting manual

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 MAINTENANCE & TROUBLESHOOTING MANUAL

BERG

BERG BeNomic EasyLeaf Technical manual

Powermate

Powermate LiftGate LG-3 Installation & operation manual

Snorkel

Snorkel TM12 Series Operator's manual

Terberg

Terberg OMNIDEKA Translation of the original instructions

Harmar Mobility

Harmar Mobility AL625 Installation & owner's manual

Rotary

Rotary SPO16 installation instructions