ZALMAN ZM-M190 User manual
Contents
1. Warning & Cautions
2. Components
3. Monitor Buttons
4. Connecting Monitor Cables
5. On Screen Display Menu
6. Display Specifications
7. Monitor Specifications
8. Troubleshooting
(When using 2D & 3D Modes)
Warning & Cautions
1
Warning
- Inserting objects into the monitor’s vents or A/V outlet can result in fire or electrocution.
- Do not disassemble, repair, or alter the product without the consent of the manufacturer. It could
result in electrocution.
- Do not pull on the cables to unplug the power cord or touch the power cord with wet hands.
Cautions
- Only used the enclosed adaptor and power cord.
- Only connect the power plug to a grounded outlet.
- Plug the power plug all the way into the outlet to keep it stable.
- Keep the unit a certain distance away from the wall for good ventilation to prevent the increase in
internal temperature of the unit.
- Do not install on a place exposed to water, oil, or humidity.
- Install the monitor on a leveled and stable location and place the monitor in a gentle manner.
- Do not place candles, cigarettes, or other potential causes of fire on top of the monitor, and do not
install the monitor close to a heat source.
- Do not use or store any flammable spray or combustible materials near the monitor.
- Do not excessively bend the power cord or leave it under a heavy object.
- Make sure that the vents are not blocked by cloth or curtains.
- Keep and store the desiccating agent or vinyl wrap away from the reach of children.
- Leaving the unit faced down on the ground or exerting excessive force on the screen can damage
the LCD panel.
- Unplug the power plug when not using the monitor for an extended period of time.
- Remove the power cord when cleaning the monitor. Use a soft and dry cloth for cleaning the monitor.
- Do not clean the product surface with wet cloth or chemicals such as industrial brighteners, wax,
benzene, alcohol, solvents, insect repellents, aromatics, lubricant, rinsing liquid etc.)
- If smoke or strange smell is emitted from the monitor, unplug the power and contact the A/S Center.
- Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not
limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper
installation, or improper testing.
-Using the monitor in 3D Mode for 1 whole hour or more (playing games, watching videos etc.)
could cause dizziness. Please take a brief rest after 1 hour of using the monitor in 3D (the
time for causing dizziness varies for each individual).
Check the condition of the unit and its components before
installation. If there is a problem with the unit and/or its
components, please contact the retailer for a replacement.
Components
2
User’s Manual for
3D Monitor
Monitor Adaptor Power Cable
3D Glasses Audio CableDVI Cable15-Pin D-Sub
Cable
3D Installation CD
(1) POWER : Turns the monitor ON/OFF
(2) LED : Indicates the operational status of the monitor
Green - ON / Red : No VGA data
Orange (flickering) - Power Saving Mode
(3) OSD Control
- MENU : Opens / Shuts the OSD Menu
- SOURCE : Seclects OSD Menu / Saves OSD Menu
settings
-▲▼ : Surfs surfing through OSD Menu
-◀▶: Changes OSD Menu settings
※OSD (On Screen Display ) : For adjusting the Color (contrast,
brightness, color temperature, color adjustment), Picture Quality
(position, phase, frequency), language selection, initialization,
and the following Hot Button feature.
(4) Hot Button
- SOURCE : Selects signal source (Analog RGB /
Digital)
-UP(▲) : Automatic Screen Adjustment
-Down(▼) : Changes modes PC / GAME / MOVIE
-VOL(◀▶) : Adjusts the monitor’s speaker volume
Monitor Buttons
3
4Connecting Monitor Cables
1. Connect the cables to the bottom panel of the monitor.
5.1 Contrast & Brightness
OSD Menu
5
Used for adjusting the contrast and brightness.
Color
Picture
OSD Menu
Function
Misc.
Sound
Contrast
Brightness
Color Temp.
Color Adjust
Contrast
Brightness
Color Temperature
Function Used for selecting the color temperature between
9300K, 6500K, and User. The user can manually
adjusts the R,G,B settings in User Mode.
Horizontal Position and Vertical Position
Function Used for adjusting the horizontal and vertical positions
with the ◀▶ buttons
5.2 Picture
Color
Picture
OSD Menu
Function
Misc.
Sound
Contrast
Brightness
Color Temp.
Color Adjust
Color
Picture
OSD Menu
Function
Misc.
Sound
Red
Green
Blue
Color
Picture
OSD Menu
Function
Misc.
Sound
H.Position
V.Position
Phase
Clock
Clock
Function Used for adjusting the clock frequency to eliminate
on-screen noise using the ◀▶ buttons.
Automatic Picture Quality Adjustment & Automatic Color Adjustment
Function Used for automatic adjustment of phase, color,
horizontal / vertical positions, and sizes. Automatic
Picture Quality Adjustment and Automatic Color
Adjustment does not operate in DIGITAL mode.
5.3 Function
Phase
Color
Picture
OSD Menu
Function
Misc.
Sound
Automatic
Picture Adjust.
Automatic Color
Adjust.
YES NO
YES NO
Transparency
Function Used for adjusting the transparency of the OSD
window.
Language Selection
Function Used for selecting the language for the OSD Menu
(English, Spanish, German, French, Korean, and
Japanese)
5.4 OSD (On Screen Display) Menu
OSD Horizontal and Vertical Position Adjustment
Function Used for adjusting the Top/Bottom, Left/Right
position of the menu screen.
Color
Picture
OSD Menu
Function
Misc.
Sound
Language
Selection
OSD
H.Position
OSD V.Position
OSD Time
Transparency
Select Light
Function For selecting the light according to the light
environment or content.
5.5. Other
Select Signal
Function For selecting between ANALOG / DIGITAL signal
Initialization
Function For deleting the user’s settings, and recalling the
default settings.
Turning off the volume & sound
•Hot Key ◀▶ buttons function as the Hot Key for adjusting the
volume.
5.6. Volume
Select Signal
Select Light PC Game Movie
Initialization Yes
No
Color
Picture
OSD Menu
Function
Misc.
Sound
Color
Picture
OSD Menu
Function
Misc.
Sound
Sound
Volume
VGA DVI
Table of contents
Other ZALMAN Monitor manuals
