Z-EDGE Z3D User manual
Z3D
USER GUIDE
BEDIENUNGSANLEITUNG
CONTENTS / INHALTSVERZEICHNIS
English 1
Deutsch 28
TABLE OF CONTENTS
-1-
1 Introduction
1.1 Features
1.2 Package Contents
1.3 Product Overview
2
2
2
3
2 Getting Started
2.1 Inserting the Memory Card
2.2 Installation
2.3 Adjust Device Position
2.4 Connecting to Power
2.5 Reset
2.6 Set Date, Time & UTC
2.7 Language
2.8 Preset Modes
4
4
4
7
7
8
8
9
9
3 Using the Dash Cam
3.1 Recording Videos
3.2 Recording Screen &
Standby Screen
3.3 Adjusting the Settings
3.4 Adjust the Recording
Resolution
3.5 Loop Recording
3.6 Emergency Video Protection
3.7 Vibration Detection
(G-Senor)
3.8 Motion Detection
3.9 Parking Mode
3.10 WDR
3.11 Screen Saver
3.12 Key Tone
3.13 Power On/Off Tone
3.14 Watermark
3.15 Fatigue Driving Alert
3.16 Light Reminder
3.17 Enable/Disable Wi-Fi
10
10
10
12
12
12
13
13
13
14
14
14
14
14
15
15
15
15
4 WiFi Setup and
Smartphone APP
4.1 WiFi Setup
4.2 App Overview
3.18 Device Auto Off
3.19 File Delete Reminder
3.20 Format SD Card
3.21 Restore Factory Settings
3.22 Taking a Snapshot
3.23 Sound Recording
3.24 Playback Videos & Photos
3.25 Deleting Video & Photo Files
3.26 Managing Video & Photo Files
3.27 GPS & Z-EDGE Multimedia
Player
19
19
19
15
15
16
16
16
16
16
17
17
18
5 Menu Overview 21
6 Product Specifications 23
8 Customer Support 25
9 Warranty 25
FCC STATEMENT 27
7 FAQs 24
10 IMPORTANT SAFETY
PRECAUTIONS
26
-2-
• Dual Recording 1440P+1080P Resolution
• 2.7" LCD Color Screen
• Up to 155 Degrees Wide Angle Lens
• WiFi Connection & Smartphone App
• Built-in GPS Logger
• Built-in G-Sensor
• Audio Recording
• Parking Mode
• Motion Detection
• Support up to 256GB Micro SD Memory Card (Not included)
1 Introduction
Thank you for purchasing Z-EDGE Z3D 2K WiFi GPS Dual Dash Cam.
Please read this manual carefully before using this product.
Keep this manual for future reference.
1.1 Features
1.2 Package Contents
Car Dash Cam Car Mount with
Built-in GPS
Rear Camera &
20ft Connecting Cable
Car Charger &
USB Charging Cable USB Data Cable User Guide
User Guide
Warranty Card
Warranty Card
Cable Tool Adhesive Cable Clips
-3-
1.3 Product Overview
1
2
3
4
5
7
8
10
11
12
13
14
15
16
17
Power Button
Micro SD Card Slot
ESC/Menu Button
Up Button
Down Button
OK Button
Micro USB Port
Suction Mount Slot
9Mini USB Port
Speaker
Front Lens
Microphone
Micro USB Cable of GPS
GPS Suction Mount
Micro USB Port of GPS
Mini USB Port
Rear Lens
6
1
3
4
5
6
2
7 8 9
12
10 11
13 14 15
16
17
-4-
2 Getting Started
2.1 Inserting the Memory Card
Insert the memory card, with the pins facing towards
the back of the device, until it clicks into place.
Push the edge of the memory card inward until you feel it click, then allow it
to push out until you can remove it from the slot.
Remove Memory Card
WARNING:
We recommend that you format the memory card in the dash cam
directly before use. Setting>Format SD Card. Please note that all data
saved on the memory card will be deleted after formatting.
Note:
•Do not remove or insert the memory card while the device is powered on -
this may damage the memory card.
Please Note:
• This package does not include Micro SD card.
• We recommend Samsung EVO Plus Micro SD card.
• Supports Micro SDXC cards up to 256GB (Class 10 or above).
2.2 Installation
Please follow the below instructions for mounting your dash cam to the
windshield of your vehicle:
Front Camera Installation
1. Slide the GPS suction mount into the slot on top of the device until a click
sound is heard.
-5-
2. Connect the dash cam to the power outlet in your car. (see 2.4)
3. Turn the camera on, whilst looking at the display screen, find a suitable
location for installing your dash cam on your windshield.
4. Press the suction mount firmly against your windshield, and rotate the lever
clockwise (12 o'clock) to secure.
5. Use the hand tool provided to tuck the power cable into the headliner.
6. In most cases, the power cable can be tucked behind the rubber trim along the
A-pillar and door frame, use the hand tool provided or gently tug on the
rubber trim to remove it to make room for the power cable. The rubber trim
can be replaced after using the hand tool. In rare cases, it may be necessary to
remove the A-pillar cover.
7. Trace the cable down the side of the door frame to the floor of the vehicle.
Then lift the carpet in the passenger side foot-well and trace the cable beneath this.
8. Alternatively, route the power cable down the door frame and tuck it behind/
below the glove box. Use the cable clips if required.
9. Bring the cable out by the center console to the lighter/auxiliary power socket.
1 2
-6-
Rear Camera Installation
1. Connect one end of the Mini USB cable into the Mini USB Port (9) on the dash
cam. Connect the other end into the Mini USB Port (16) on the rear cam.
2. Turn on the dash cam. The rear-lens view will automatically appear on the
display screen in Dual format (PiP).
Tip: To view full-screen, press the 'Down' button (5) to switch while in Standby
mode (no recording). Or enter the Setting menu and find [Display] to select
different display views.
3. Whilst looking at the display screen and without removing the adhesive
backing, find a suitable location for installing your rear cam on your rear
windshield.
4. Having found a suitable location on your rear windshield, peel off the
protective plastic backing from the adhesive mount. Press firmly against your
rear windshield to secure.
5. For a more organized car environment, the rear cam USB cable can be routed
as indicated by the dashed line in the diagram.
WARNING:
Do not install the device on a tinted window - doing so may damage the tint
film.
Note:
•Consult your vehicle's technical manual or consult a professional if you are
not sure how to remove interior panels.
-7-
2.3 Adjust Device Position
1. Loosen the nut to swivel the device vertically. Click into place and secure by
tightening the nut.
2. Swivel the device horizontally for a clear view.
2.4 Connecting to Power
Use only the supplied USB car charger to power the dash cam and charge the
built-in battery.
1. Slide the GPS Suction Mount into the slot on top of the dash cam until a
click sound is heard.
2. Plug the Micro USB Cable of GPS (13) into the dash cam's Micro USB Port (7).
3. Plug one end of the USB charging cable into the Micro USB Port of GPS (15).
4. Plug the other end into the USB car charger, and insert the charger into your
vehicle's cigarette lighter socket.
• Once the vehicle's engine is switched on, the dash cam will automatically
power on.
• When the vehicle engine is switched off, the dash cam will automatically save
the recording and power off within 5 seconds.
Automatic Power
1 2
Other manuals for Z3D
1
Table of contents
Languages:
Other Z-EDGE Dashcam manuals
