visit us @ www.ardaappliances.com
pg 6
Before You Start...
1. Read this manual carefully and completely.
2. ARDA range hoods conform to ETL/CSA standards.
WůĞĂƐĞĐŚĞĐŬLJŽƵƌůŽĐĂůďƵŝůĚŝŶŐĐŽĚĞƐĨŽƌĂŶLJĂĚĚŝƟŽŶĂů
ƌĞƋƵŝƌĞŵĞŶƚƐ
3. The appliance has been manufactured as class I, there-
ĨŽƌĞŐƌŽƵŶĚĐŽŶŶĞĐƟŽŶŝƐŶĞĐĞƐƐĂƌLJϭϭϱsƉůƵŐŝƐ
provided. The range hood must be installed so that that
the plug is easily accessible.
4. This appliance has been designed for use in both ducted
ĂŶĚƌĞĐŝƌĐƵůĂƟŶŐŵŽĚĞƐ&ŽůůŽǁƚŚĞĂƉƉƌŽƉƌŝĂƚĞŝŶƐƚĂůůĂ-
ƟŽŶŵĞƚŚŽĚ
IŶƐƚĂůůĂƟŽŶ/ŶƐƚƌƵĐƟŽŶƐ
Planning Your Installation
1. DĞĂƐƵƌĞƚŚĞŇŽŽƌƚŽĐĞŝůŝŶŐŚĞŝŐŚƚ
This hood can be installed on walls
between 8” and 9” tall.
2. &ŝŶĚƚŚĞĐĞŶƚƌĞƉŽŝŶƚŽĨLJŽƵƌƌĂŶŐĞ
cooktop. Drop a plumb line from
your ceiling to this point on your
cooking surface. DĂƌŬƚŚĞĐĞŝůŝŶŐ
ǁŚĞƌĞƚŚĞƉůƵŵďůŝŶĞƐƚĂƌƚƐ
3. Around this point, install cross brac-
ing between the ceiling joists for
the island hood to mount to.
4. Check your range/cook-top User
ManualĨŽƌƚŚĞƐƉĞĐŝĮĞĚŵŝŶŝŵƵŶ
and maximum distance above your
cooking suface. The minimum
distance between any element or
ŇĂŵĞŚĞŝŐŚƚĂŶĚƚŚĞŶĞĂƌĞƐƚĐŽŵ-
bustable surface is 61cm (24”).
5. Decided where the ductwork will
run between the hood and the out-
side. Short, straight duct runs will
ƉƌŽǀŝĚĞƚŚĞŵŽƐƚĂŝƌŇŽǁ
Floor to
ceiling
Center of
cooking
surface to
ceiling
Ceiling duct opening
Ceiling joists &
cross-bracings
/^>EDKhEd,KK^
