Yoder Smokers YS 480 User manual

Procedure for replacing the fans in a Yoder Smokers Pellet Grill

(YS480, YS640, YS1500 Models)

! CAUTION: BEFORE BEGINNING THIS PROCEDURE, INSURE THAT THE POWER CORD TO THE

SMOKER IS DISCONNECTED! FAILING TO DO SO MAY RESULT IN BODILY INJURY.

1. Remove the eleven screws (#10 x 3/4” Hex

Head Self-Drilling Screws) securing the hopper

end panel, and then pull out the panel.

2. Disconnect the two wires (one green, one

white) from the outer fan. NOTE: (Disconnect

the two purple wires from the fuse holder on

Comp cart models only)

3. Remove the fan diffuser from the outer fan by

loosening the two 632x38MS screws and two

632HN nuts.

4. Remove existing fan from outer Hopper panel

by removing the four screws (#10x3/4 hex head

self drilling).

5. Important: On the top of both fans are

directional arrows indicating the correct

orientation for the fans. Make sure that the

new fan matches the air flow orientation as

shown below. (air flow direction pointed

towards chamber)

6. Install the new outer fan to the hopper end

panel using the 4 screws removed in step 3.

(#10 x 3/4” Hex Head Self-Drilling Screws)

7. Install the fan diffuser to the outer fan using the

two 632x38MS screws and two 632HN nuts.

8. Disconnect the two wires (one green, one

white) from the inner fan.

9. Next use a flat head screwdriver to loosen the

housing from the silicone that is securing the

inner fan housing in place. NOTE: 240 volt

models only( loosen the ground wire screw,

nut and star washer before removing the

housing)

10. Remove the housing with the fan attached from

the hopper to replace the inner fan.

11. Using a phillips head screwdriver, loosen the

four screws (#8-32x1/2” phillips head

machine screws) and nuts (#8-32).

12.Install the new inner fan making sure

that the air flow arrow is pointed towards

the housing and the wire terminals are

positioned to the upper left.

13.Apply silicone to the underside of each

side of the housing and slide the housing

in place against the inner hopper wall.

NOTE: make sure that the igniter wire

is located in the large “C” cutout on

the housing.

14.View showing inner fan assembly

positioned under the auger motor

assembly:

WIRE TERMINALS

GROUND WIRE

15.(240 volt models only) Position the

housing so that the screw that was

removed for the ground wire can be

inserted into the housing. Secure the

ground wire using the screw, nut and

star washer removed in step 9.

16. Connect the two wires (one green, one white)

to the inner fan.

17. Connect the two wires (one green, one white)

to the outer fan. NOTE: (Connect the two

purple wires to the fuse holder on Comp cart

models only)

18.Install the end panel using the eleven (#10

x 3/4” Hex Head Self-Drilling Screws) screws to

secure the hopper end panel.

END OF PROCEDURE

Other manuals for YS 480

This manual suits for next models

Table of contents

Other Yoder Smokers Grill manuals

Yoder Smokers

Yoder Smokers YS 1500 User manual

Yoder Smokers

Yoder Smokers YS 480 User manual

Yoder Smokers

Yoder Smokers S Series User manual

Yoder Smokers

Yoder Smokers YS 640 User manual

Yoder Smokers

Yoder Smokers Backyard Smoker User manual

Yoder Smokers

Yoder Smokers YS 480 User manual

Yoder Smokers

Yoder Smokers YS 640 User manual

Popular Grill manuals by other brands

Orbegozo

Orbegozo GR 2300 instruction manual

bora

bora PT11 Operating and installation instructions

Klarstein

Klarstein 10031664 manual

Garland

Garland MWE3W Installation and operation manual

Char-Broil

Char-Broil 463722714 Product guide

Nexgrill

Nexgrill 720-0830HK Operating instruction

Kenmore

Kenmore 415.16123800 Use and care guide

Camp Chef

Camp Chef PG24CLAU Warning & instruction booklet

Tucker Barbecues

Tucker Barbecues GTR Series Assembly, installation and operating instructions

Monogram

Monogram ZGG540NCP1SS owner's manual

Equipex

Equipex Sodir Savoy Operation manual

Gaggenau

Gaggenau VR 414 610 use and care manual

Miele

Miele KM 408-1 operating instructions

George Foreman

George Foreman GGR50B owner's manual

AOG

AOG T series quick start guide

Gorenje

Gorenje TG2000CB Instruction manua

Weber

Weber Genesis Silver-B Permamount NG 051701 owner's guide

Glen

Glen SA 3037 user guide