Yardistry AVERY User guide

1 support@yardistrystructures.com

AVERY PAVILION

with ALUMINUM rOOF

Installaon and Operang Instrucons – YM11742

Yardistry – North America

Toll Free Customer Support: 1.888.509.4382

info@yardistrystructures.com

www.yardistrystructures.com

For Spanish instrucons visit our website at:

(Para obtener instrucciones españoles, visite nuestro sio web en:)

hp://yardistrystructures.com/instrucon-manuals/

Revised 11-14-2016

HEIGHT:

10’6” or 3.2m

Height: 9’ 11” (3.02 m)

10’ 7”

12’

[3657.8]

[3225.8]

http://bit.ly/averyinstall

2 support@yardistrystructures.com

Important Safety Notice!

Yardistry components are intended for privacy, decorative and ornamental use only.

Product is NOT INTENDED for the following:

• A safety barrier to prevent unsupervised access to pools, hot tubs, spas or ponds.

• As load bearing support for a building, structure, heavy objects or swings.

• Used in structures that trap wind, rain or snow that would create extra load on the

product.

Accumulated snow must be removed from roof.

DO NOT climb or walk on roof for any reason.

Permanent structures may require a building permit. As the purchaser and or installer of this

product you are advised to consult local planning, zoning and building inspection departments for

guidance on applicable building codes and/or zoning requirements.

Wood is NOT ame retardant and will burn. Grills, re pits and chimineas are a re hazard if

placed too close to a Yardistry structure. Consult user’s manual of the grill, re pit or chimnea for

safe distances from combustible materials.

Wear gloves to avoid injury from possible sharp edges of individual elements before assembly.

During installation, follow all safety warnings provided with your tools and use OHSA

approved safety glasses. Some structures may require two or more people to install safely.

Check for underground utilities before digging or driving stakes into the ground!

It is important during assembly to closely follow the instructions, complete the assembly

on a solid level surface and that you follow the instruction to square up, level and anchor the

structure, this will reduce the gap at wood connections during assembly.

General Information: Wood components are manufactured with Cedar (C. Lanceolata)

which is protected with factory applied water-based stain. Knots, small checks (cracks)

and weathering are naturally occurring and do not affect the strength of the product.

Annual application of a water-based water repellent sealant or stain is important and will

help reduce weathering and checks.

www.yardistrystructures.com

Questions?

Call toll free or write us at:

1 (888) 509-4382

[email protected]

Patents Pending

General Information

3 support@yardistrystructures.com

Limited Warranty

Yardistry warrants that this product is free from defect in materials and workmanship

for a period of one year from the original date of purchase. In addition, all lumber is

warranted for 5 years against rot and decay. This warranty applies to the original owner

and registrant and is non-transferable.

Regular maintenance is required to assure the integrity of your product and is a requirement of

the warranty. This warranty does not cover any inspection cost.

This Limited Warranty does not cover:

• Labor for replacement of any defective item(s);

• Incidental or consequential damages;

• Cosmetic defects which do not affect performance or integrity;

• Vandalism; improper use or installation; acts of nature;

• Actsofnatureincludingbutnotlimitedtowind,storms,hail,oods,excessivewater 

 exposure;

• Minor twisting, warping, checking, or any other natural occurring properties of wood that

do not affect performance or integrity.

Yardistryproductshavebeendesignedforsafetyandquality.Anymodicationsmadetothe

original product could damage the structural integrity of the product leading to failure and

possibleinjury.Yardistrycannotassumeanyresponsibilityformodiedproducts.Furthermore,

modicationvoidsanyandallwarranties.

This product is warranted for RESIDENTIAL USE ONLY. Yardistry disclaims all other

representations and warranties of any kind, express or implied.

This Warranty gives you specic legal rights. You may have other rights as well which vary from state to state or province to

province. This warranty excludes all consequential damages, however, some states do not allow the limitation or exclusion of

consequential damages, and therefore this limitation may not apply to you.

4 support@yardistrystructures.com

Instructions for Proper Maintenance

Your Yardistry structure is designed and constructed of quality materials. As with all outdoor

products it will weather and wear. To maximize the enjoyment, safety and life of your structure

it is important that you, the owner, properly maintain it.

Symbols:

Throughout these instructions symbols are provided in the top, right-hand corner of the page.

If you dispose of your Yardistry structure: Please disassemble and dispose of your

unit so that it does not create any unreasonable hazards at the time it is discarded. Be

sure to follow your local waste ordinances.

HARDWARE:

• Check metal parts for rust. If found, sand and repaint using a non-lead paint complying

with 16 CFR 1303.

• Inspect and tighten all hardware after completion of assembly; after rst month of use; and

then annually. Do not over-tighten as to cause crushing and splintering of wood.

• Check for sharp edges or protruding screw threads, add washers if required.

WOOD PARTS:

• Applying a water repellent or stain (water-based) on a yearly basis is important

maintenance to maintain maximum life and performance of the product.

• Check all wood members for deterioration, structural damage and splintering. Sand down

splinters and replace deteriorated wood members. As with all wood, some checking and

small cracks in grain is normal

• Some gapping may occur at some wood connections.

• Tape Measure

• Carpenters Level

• Standard or Cordless Drill

• 7/16”, 1/2” & 9/16” Wrench

• 7/16”, 1/2” & 9/16” Socket

Assembly Guides

• 8’ Step Ladder

• Safety Glasses

• Adult Helper

• Safety Gloves

• Hard Hat

Tools Required:

• Use Help, where this is shown, 2, 3 or 4

people are required to safely complete

this step. To avoid injury or damage to the

assembly make sure to get some help.

• Use a measuring tape to assure proper

location

• Pre-drill a pilot hole before fastening

screw or lag to prevent splitting of wood.

• 6’ Step Ladder x 2

• Square

• Rachet

• Check that assembly is square before

tightening bolts

5 support@yardistrystructures.com

Following are some helpful tips to make the assembly process smooth and efcient.

PRE-ASSEMBLIES:

(i.e. Post and Beam Assemblies, Roof Rafter Assembly, etc)

• Work on a raised, solid and at surface such as, a table or saw horse.

• Keep all connections ush where shown in the instructions.

• When assembling the beams keep parts at, straight and snug when

connecting.

METAL PARTS:

• Roong material may have sharp edges, wear safety gloves.

• Remove all plastic covering, on both sides of the metal panels, directly

before installing each piece.

• Place roong material on a non-abrasive surface before and after assembly

as it can bend, dent and scratch easily.

• The roong screws can easily crush the roof panels and roof edges when

using a power drill. We recommend hand tightening the roong screws so

they sit snug and tight to the roong material.

Assembly Tips

6 support@yardistrystructures.com

Note: It is critically important you start with square, solid and level footings, concrete

pad or deck to attach your Pavilion.

We supply Post Mounts with this structure which gives you the exibility to permanently install your structure

to a pre-existing or new wood or concrete surface.

• The hardware to attach the Post Mount to the structure is included.

• The hardware to mount the structure permanently will need to be purchased separately at your local

hardware store.

If you are mounting to concrete footers see below for the correct locations and placement. Please double

check for possibility of any underground utilities such as gas, telephone, cable or sprinkler lines.

Following are some examples of how to mount the structure to wood or concrete surfaces.

Refer to your local building and city codes, ordinances, neighbourhood covenants, or height restrictions

regarding this type of structure for guidance on acceptable installation requirements.

Permanent Installation Examples

Concrete Footer

Required

Depth

Anchoring Hardware not included

Post Mount

post to post

plinth to plinth

9'- 4

13'-2 19

13'-219

9'-4

10'-2 1

10'-6"

Post to Post

Plinth to Plinth

Post to Post

Post to Post Plinth to Plinth

9’ 3/4” 13’ 2-5/8”

10’ 6”

10’ 2-1/4”

9’ 4-1/2”

7 support@yardistrystructures.com

Permanent Installation Examples cont.

Concrete Patio (min. 10’ 8” x 11’) with 6” clearance on all sides

Wood Deck (min. 10’ 8” x 11’) with 6” clearance on all sides

Anchoring Hardware not included

Anchoring Hardware (not included)

Post

Mount

Post Mounts have a 1/2” diameter

hole for anchoring hardware.

8 support@yardistrystructures.com

Part Identification ( )

Dimensions are approximate and are shown to assist in the identification of parts for

assembly. Actual dimensions may be smaller or larger.

4pc. (423) - 6 x 6 Post

152.4 X 152.4 X 2336.8mm (6 x 6 x 92")

Y70119-423

4pc. (330) - Gusset Right

38.1 x 190.5 x 1003.3mm (1-1/2 x 7-1/2 x 39-1/2")

Y70119-330

16pc. (422) - Plinth 6 x 6 Post

19.1 x 133.4 x 190.5mm (3/4 x 5-1/4 x 7-1/2")

Y50119-422

4pc. (404) - Beam End - Inside

38.1 x 139.7 x 460.4mm (1-1/2 x 5-1/2 x 18-1/8")

Y50119-404

4pc. (401) - Beam Front Back

38.1 x 139.7 x 1714.5mm (1-1/2 x 5-1/2 x 67-1/2")

Y50119-401

2pc. (402) - Beam Inside

38.1 x 139.7 x 2336.8mm (1-1/2 x 5-1/2 x 92")

Y50119-402

Y50119-403

38.1 x 139.7 x 1590.7mm (1-1/2 x 5-1/2 x 62-5/8")

4pc. (403) - Beam Side

12pc. (412) - Rafter

31.8 x 76.2 x 1866.9mm (1-1/4 x 3 x 73-1/2")

Y50119-412

4pc. (415) - Gable End

25.4 x 139.7 x 1946.3mm (1 x 5-1/2 x 76-5/8")

Y50119-415

Y50119-405

25.4 x 50.8 x 1574.8mm (1 x 2 x 62")

2pc. (405) - Cross Gusset Support

4pc. (331) - Gusset Left

38.1 x 190.5 x 1003.3mm (1-1/2 x 7-1/2 x 39-1/2")

Y70119-331

4pc. (414) - Gable Gusset

31.8 x 133.4 x 580.1mm (1-1/4 x 5-1/4 x 22-27/32")

Y50119-414

6pc. (419) - Strap Long

31.8 x 76.2 x 1905.6mm (1-1/4 x 3 x 75-1/32")

Y50119-419

6pc. (418) - Strap Short

31.8 x 76.2 x 1275.8mm (1-1/4 x 3 x 50-7/32")

Y50119-418

Y50119-420

25.4 x 81.8 x 1590.7mm (1 x 3-7/32 x 62-5/8")

4pc. (420) - Rafter Top

Y50119-413

25.4 x 81.8 x 590.6mm (1 x 3-7/32 x 23-1/4")

2pc. (413) - Rafter Brace

2pc. (409) - End Gable Centre Front

88.9 x 139.7 x 766.3mm (3-1/2 x 5-1/2 x 30-11/64")

Y70119-409

2pc. (406) - End Gable Centre Back

76.2 x 139.7 x 795.5mm (3 x 5-1/2 x 31-5/16")

Y70119-406

4pc. (416) - Tie

31.8 x 88.9 x 2333.6mm (1-1/4 x 3-1/2 x 91-7/8")

Y50119-416

4pc. (417) - Tie Brace

31.8 x 88.9 x 352.6mm (1-1/4 x 3-1/2 x 13-7/8")

Y50119-417

9 support@yardistrystructures.com

Dimensions are approximate and are shown to assist in the identification of

parts for assembly. Actual dimensions may be smaller or larger.

Hardware Identification ( )

1pc. - Weather Seal -

Ridge Clip (6Pk)

(Y70818-120)

1pc. - Roof Panel (6 Pk)

(Y70828-111)

2pc.

Ridge Cap Short

(Y01028-116)

1pc.

Ridge Cap

(Y01028-117)

4pc.

Ridge Clip Short

(Y01028-115)

2pc.

Ridge Clip

(Y01028-114)

2pc.

Roof Edge Left

(Y01028-112)

2pc.

Roof Edge Right

(Y01028-113)

1pc. - Roof To Beam

Bracket Set (8Pk)

(Y70819-108)

1pc. - Tie Centre

Bracket Set (4Pk)

(Y70819-107)

1pc. - Post Mount

Bracket Set (8Pk)

(Y70819-109)

1pc. - Gazebo ID Plaque

(Y70800-104)

1pc. - Jamb Mount

Bracket Set (8Pk)

(Y70819-121)

1pc. - Tie Wrap

Bracket Set (8Pk)

(Y70819-106)

NOTE: Parts have been packed

inside (423) 6 x 6 Post. Check for parts inside the Posts.

10 support@yardistrystructures.com

Hardware Identification ( )

Dimensions are approximate and are shown to assist in the identification of

parts for assembly. Actual dimensions may be smaller or larger.

64pc. 5/16" Flat Washer

(Y05118-203)

1pc. #2 x 2" Robertson Driver (9200014)

8pc. - 3/8" Lock Nut

(Y08318-803)

1pc. - 1/8" Drill Bit (Y00400-002)

48pc. Wood Screw #8 x 2 1/2" - (52043522)

40pc. 5/16 - T-Nut

(Y08518-300)

32pc. 1/4" Flat Washer

(Y05118-201)

40pc. 5/16" Lock Washer

(Y05318-300)

16pc.

3/8" Flat Washer

(Y05118-801)

4pc. Hex Bolt

3/8 x 9-1/2"

(Y07718-892)

8pc. Hex Bolt 5/16 x 3-3/4" - (Y07718-333)

8pc. Lag Screw 5/16 x 4-3/4" - (Y06218-343)

58pc. Pan Screw #8 x 1"

(52433510)

128pc. Hex Roofing Screw

#8x 1"

(Y06728-510)

26pc. Wood Screw

#7 x 3/4"

(Y06091-003)

152pc. Wood Screw #8 x 1-1/2"

(52043512)

1pc. - Hex Driver

(Y00400-004)

6pc. Hex Bolt 1/4 x 2-3/4" - (Y07718-223)

4pc. #8x3/4" - Sheet

Metal Screw

(Y06428-503)

4pc. Wood Screw #10 x 4" - (52043940)

2pc. Hex Bolt 1/4 x 4-3/4" - (Y07718-243)

16pc. 1/4" Flat Washer Large

(Y05118-211)

16pc. Hex Bolt 1/4 x 2" - (Y07718-220)

36pc. Wood Screw #8 x 2 1/4" - (52043521)

16pc. Lag Screw 5/16 x 3" - (Y06218-330)

4pc. Hex Bolt

3/8 x 8"

(Y07718-880)

24pc. - 1/4" Lock Nut

(Y08318-203)

20pc. Hex Bolt 5/16 x 1-1/2" - (Y07718-312)

4pc. Hex Bolt 5/16 x 4" - (Y07718-340)

8pc. Hex Bolt 5/16 x 2-1/4" - (Y07718-321)

56pc. Wood Screw #8 x 1-3/4"

(52043513)

8pc. Pan Screw #10 x 2-1/2" - (Y06491-722)

80pc. Pan Screw #10 x 1-1/4"

(52443911)

This manual suits for next models

Table of contents

Other Yardistry Outdoor Furnishing manuals

Yardistry

Yardistry CAROLINA User manual

Yardistry

Yardistry CS016 Series User manual

Yardistry

Yardistry YM12978 User manual

Yardistry

Yardistry Structures CS008 Series User manual

Yardistry

Yardistry 12' x 12' MERIDIAN GAZEBO YM11769 User manual

Yardistry

Yardistry YM12952 User manual

Yardistry

Yardistry YM11915 User manual

Yardistry

Yardistry Fusion YM11703 User manual

Yardistry

Yardistry MERIDIAN OCTAGON YM11924 User manual

Yardistry

Yardistry YM12784 User manual

Yardistry

Yardistry YM12721 User manual

Yardistry

Yardistry YM12837 User manual

Yardistry

Yardistry YM12949 User manual

Yardistry

Yardistry YM12941Z User manual

Yardistry

Yardistry YM11640 User manual

Yardistry

Yardistry YM11772 User manual

Yardistry

Yardistry YM12632X User manual

Yardistry

Yardistry MERIDIAN YM11775 User manual

Yardistry

Yardistry CS002 Series User manual

Yardistry

Yardistry YM12935 User manual

Yardistry

Yardistry YM12705Z User manual

Yardistry

Yardistry YM12810X User manual

Yardistry

Yardistry YM12904 User manual

Yardistry

Yardistry MERIDIAN YM11756 User manual

Popular Outdoor Furnishing manuals by other brands

Belleze

Belleze 014-HG-20074 manual

Hatteras Hammocks

Hatteras Hammocks DCA1-K-HH instructions

Kozyard

Kozyard Morgan Aluminum Pergola Assembly manual

Lemeks

Lemeks Palmako PA120-5959 Assembly, installation and maintenance manual

Polywood

Polywood 400 Series Assembly instructions

OLT

OLT 24 Assembly manual

forest-style

forest-style HACIENDA 2354 Building instructions

Courtyard Creations

Courtyard Creations RUS0188-WM Assembly instructions

RPR

RPR OLLIE CHAIR manual

kingsley-bate

kingsley-bate MC-55 Assembly instructions

Weltevree

Weltevree Carrier product manual

Grange Fencing

Grange Fencing Elite Arch Assembly instructions

Grosfillex

Grosfillex AUVENT YR14 Assembly instructions

X-METAL

X-METAL EAGLE 33511 Assembly instructions

Anova

Anova FBW6R Assembly instructions

Outsunny

Outsunny 84A-090 manual

Ivy Terrace

Ivy Terrace IVTD212 Assembly instructions

Breezesta

Breezesta FANBACK ADIRONDACK AD-0101 Assembly