Yanmar YD42 User manual

en English

OPERATION

MANUAL

COLOR DISPLAY

YD42

Preface

Disclaimer

All information, illustrations and specifications in this manual are

based on the latest information available at the time of publishing.

The illustrations used in this manual are intended as representative

reference views only. Moreover, because of our continuous product

improvement policy, we may modify information, illustrations

and/or specifications to explain and/or exemplify a product, service

or maintenance improvement. We reserve the right to make any

change at any time without notice. Yanmar is a registered

trademark of YANMAR CO., LTD. in Japan, the United States and/or

other countries.

No part of this publication may be reproduced or used in any form

by any means - graphic, electronic, or mechanical, including

photocopying, recording, taping, or information storage and

retrieval systems - without the written permission of YANMAR CO.,

LTD.

Please review and comply with the applicable laws and regulations

of the international export control regimes at the territory or

country where the product and manual are intended to be

imported and used.

Warranty

Refer to the Yanmar Limited Warranty Handbook for a complete

warranty description.

Compliance statement

Yanmar declare under our sole responsibility that the product

conforms with the requirements of:

•CE under EMC Directive 2014/30/EU

•Level 2 devices of the Radio communications (Electromagnetic

Compatibility) standard 2017

Preface | YD42 Operation Manual 3

Warning

The user is cautioned that any changes or modifications not

expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

About this manual

This manual is a reference guide for operating the unit. It assumes

that all equipment is installed and configured, and that the system

is ready to use.

Some features may not be activated or available for screenshots in

the manual. As a result, screenshots of menus and dialogs may not

match the look of your unit.

Important text that requires special attention from the reader is

emphasized as follows:

ÚNote: Used to draw the reader’s attention to a comment or

some important information.

Warning: Used when it is necessary to warn

personnel that they should proceed carefully to

prevent risk of injury and/or damage to equipment/

personnel.

4Preface | YD42 Operation Manual

Contents

7 Basic operation

7Front panel and keys

8 Turning the unit on and off

8 Menus

8 Editing a value

9 Display setup

10 Selecting a page

12 Pages

12 Static gauge

12 Changing page data

13 Missing or faulty data

13 Predefined pages

22 Fuel

22 Requirements

22 Calibrate

22 Fuel management

23 Adding fuel

23 Fuel used

25 Alarms

25 System alarms

25 Engine alarms

26 The alarms dialog

29 Trip log

29 Accessing the trip log

29 Trip 1

29 Trip 2

30 Log

31 User settings

31 Accessing the settings dialog

31 Pages

34 Calibration

34 Damping

Contents | YD42 Operation Manual 5

35 AIS

37 Software setup

37 Software setup sequence

37 Accessing the system settings dialog

37 Network settings

40 Units settings

40 Decimal places

40 Key beeps

40 Language

41 Time

41 Display setup

42 Files

42 Simulate

42 Restore defaults

42 Engine setup

43 Global reset

43 About

44 Files

44 USB mass storage device

44 Accessing the files dialog

44 Software update

46 Import system settings

46 Export system settings

47 Maintenance

47 Preventive maintenance

47 Cleaning the display unit

48 Dimensional drawings

49 Technical specifications

50 Supported data

50 NMEA 2000

52 J1939

6Contents | YD42 Operation Manual

Basic operation

Front panel and keys

A Pages key

With no menu active:

•Press to scroll through the enabled pages

•Press and hold to display a list of enabled pages from

where you can select directly the page to display

Menu and dialog operation:

•Press to return to previous menu level or to exit a dialog

B Arrow keys

•Press to move up and down in menus and dialogs

•Press to adjust a value

C Enter key

•Press to select a menu option and to enter the next menu

level

•Press to activate/deactivate a menu/dialog option

D Menu/Backlight key

•Press once to display the page menu

•Double-press to display the settings dialog

•Press and hold to open the display setup dialog from

where you can adjust the backlight

Basic operation | YD42 Operation Manual 7

Turning the unit on and off

The unit is turned on by the power ON wire. Refer to the installation

documentation for more information.

It is possible to put the unit in sleep mode, refer to "Displaysetup" on

page 9.

Switch off the main power supply to turn the unit off.

First time startup

When the unit is started for the first time, or after a factory default,

the unit displays a series of dialogs. Respond to the dialog prompts

to make fundamental settings.

You can perform further setup and later change settings using the

system settings dialogs.

Menus

Not all pages have a page specific menu (A), but all page menus

give access to the Settings dialog.

Activate the menu by pressing the Menu key from any page.

To navigate the menu:

•Use the arrow keys

To confirm a selection:

•Press the enter key

To return to the previous menu level:

•Press the pages key

Editing a value

1. Press the enter key to turn the field into edit mode

8Basic operation | YD42 Operation Manual

- The left digit starts flashing

2. Use the arrow keys to set the value for the flashing digit

3. Press the enter key to move focus to the next digit

4. Repeat step 3 and 4 until all digits are set

5. Press the enter key to leave edit mode for the selected field

Selectedfield Fieldineditmode

To cancel editing or leave a dialog:

•Press the pages key

•Press the menu key

Display setup

The display setup can be adjusted at any time from the Display

setup dialog.

To access the dialog:

•Press and holding the menu key

Backlight level

Adjusts the backlight level.

When the dialog is active, you can cycle the preset backlight levels

by short presses on the menu key.

Basic operation | YD42 Operation Manual 9

Night mode

Activates/deactivates the night mode color palette.

Night mode color

Sets the night mode color palette.

Invert day color

Changes the background color for the pages from default black to

white.

Sleep mode

In Sleep mode, the backlight for the screen and keys are turned off

to save power. The system continues to run in the background.

To exit Sleep mode:

•Press the menu key

Selecting a page

Scrolling through enabled pages

To scroll through the enabled data pages:

•Press the pages key

10 Basic operation | YD42 Operation Manual

Other manuals for YD42

Table of contents

Other Yanmar Monitor manuals

Yanmar

Yanmar YD42 User manual

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual