Yamaha RX-V377 User manual

SERVICE MANUAL

RX-V377/HTR-3067

1 0 1 2 9 7

AV RECEIVER

RX-V377/HTR-3067

'14.03

Note:

When the DIGITAL P.C.B. or IC222 on DIGITAL P.C.B. is replaced, this unit will display “Internal Error” and will not

operate properly. The model name and destination MUST be written to the backup IC (EEPROM: IC222 on DIGITAL

P.C.B.) to have proper operation. (For details, refer to “S5. SOFT SWITCH” menu of the self-diagnostic function.)

注意：

DIGITAL P.C.B. または DIGITAL P.C.B. のIC222 を交換すると、“Internal Error” が表示されて本機が正常に動作し

なくなります。正常に動作させるために、モデル名と仕向け先をバックアップ IC（EEPROM：DIGITAL P.C.B. の

IC222）へ書き込む必要があります。（詳細は、ダイアグの “S5. SOFT SWITCH” メニューを参照してください。）

■CONTENTS

TO SERVICE PERSONNEL ........................................... 2

FRONT PANELS ........................................................ 3–4

REAR PANELS ........................................................ 5–10

REMOTE CONTROL PANEL ........................................11

SPECIFICATIONS / 参考仕様 ................................ 12–16

INTERNAL VIEW ......................................................... 17

SERVICE PRECAUTIONS / サービス時の注意事項 .... 17

DISASSEMBLY PROCEDURES / 分解手順 .......... 18–21

UPDATING FIRMWARE /

ファームウェアのアップデート ........................... 22–25

SELF-DIAGNOSTIC FUNCTION /

ダイアグ（自己診断機能） .................................... 26–57

POWER AMPLIFIER ADJUSTMENT /

パワーアンプ調整 ...................................................... 58

DISPLAY DATA ...................................................... 59–60

IC DATA .................................................................. 61–70

BLOCK DIAGRAMS ............................................... 71–72

WIRING DIAGRAM ...................................................... 73

PRINTED CIRCUIT BOARDS ................................ 74–85

PIN CONNECTION DIAGRAMS .................................. 86

SCHEMATIC DIAGRAMS ...................................... 87–96

REPLACEMENT PARTS LIST ............................. 97–109

REMOTE CONTROL ........................................... 110–111

CONFIGURING THE SYSTEM SETTINGS .................112

システム設定を変更する .............................................113

FIRMWARE UPDATING PROCEDURE .............. 114–117

ファームウェア更新手順 .....................................118–121

RX-V377/HTR-3067

■TO SERVICE PERSONNEL

1. Critical Components Information

Components having special characteristics are marked ⚠ and

must be replaced with parts having specifications equal to

those originally installed.

2. Leakage Current Measurement (For 120V Models Only)

When service has been completed, it is imperative to verify

that all exposed conductive surfaces are properly insulated

from supply circuits.

• Meter impedance should be equivalent to 1500 ohms shunted

by 0.15 μF.

WALL

OUTLET

EQUIPMENT

UNDER TEST

AC LEAKAGE

TESTER OR

EQUIVALENT

INSULATING

TABLE

• Leakage current must not exceed 0.5mA.

• Be sure to test for leakage with the AC plug in both polarities.

For U model

“CAUTION”

“F1501: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 6.3A,

250V FUSE.”

For C model

CAUTION

F1501: REPLACE WITH SAME TYPE 6.3A, 250V FUSE.

ATTENTION

F1501: UTILISER UN FUSIBLE DE RECHANGE DE MÉME TYPE DE 6.3A, 250V.

WARNING: CHEMICAL CONTENT NOTICE!

This product contains chemicals known to the State of California to cause cancer, or birth defects or other reproductive

harm.

DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON

WHATSOEVER!

Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or

expose eyes to solder/ﬂux vapor!

If you come in contact with solder or components located inside the enclosure of this product, wash your hands before

handling food.

About lead free solder / 無鉛ハンダについて

All of the P.C.B.s installed in this unit and solder joints are

soldered using the lead free solder.

Among some types of lead free solder currently available,

it is recommended to use one of the following types for

the repair work.

• Sn + Ag + Cu (tin + silver + copper)

• Sn + Cu (tin + copper)

• Sn + Zn + Bi (tin + zinc + bismuth)

Caution:

As the melting point temperature of the lead free solder is

about 30°C to 40°C (50°F to 70°F) higher than that of

the lead solder, be sure to use a soldering iron suitable to

each solder.

本機に搭載されているすべての基板およびハンダ付けに

よる接合部は無鉛ハンダでハンダ付けされています。

無鉛ハンダにはいくつかの種類がありますが、修理時に

は下記のような無鉛ハンダの使用を推奨します。

• Sn+Ag+Cu（錫 +銀+銅）

• Sn+Cu（錫 +銅）

• Sn+Zn+Bi（錫 +亜鉛 +ビスマス）

注意：

無鉛ハンダの融点温度は通常の鉛入りハンダに比べ 30 〜

40℃程度高くなっていますので、それぞれのハンダに合っ

たハンダごてをご使用ください。

RX-V377/HTR-3067

■FRONT PANELS

RX-V377 (U, C, R, K, A, B, G, F, L, V, S, H, J models)

J model

U, C, R, K, A, B, G, F, L, V, S, H models

RX-V377 (T model)

RX-V377/HTR-3067

HTR-3067 (U, C, R, K, A, G, F, L, S, H, J models)

J model

U, C, R, K, A, G, F, L, S, H models

HTR-3067 (T model)

RX-V377/HTR-3067

■REAR PANELS

RX-V377 (U, C models)

RX-V377 (R, V, S models)

RX-V377 (T model)

RX-V377/HTR-3067

RX-V377 (K model)

RX-V377 (A model)

RX-V377 (B, G, F models)

RX-V377/HTR-3067

RX-V377 (L model)

RX-V377 (H model)

RX-V377 (J model)

RX-V377/HTR-3067

HTR-3067 (U, C models)

HTR-3067 (R, S models)

HTR-3067 (T model)

RX-V377/HTR-3067

HTR-3067 (K model)

HTR-3067 (A model)

HTR-3067 (G, F models)

RX-V377/HTR-3067

HTR-3067 (L model)

HTR-3067 (H model)

HTR-3067 (J model)

Other manuals for RX-V377

This manual suits for next models

Table of contents

Other Yamaha Stereo Receiver manuals

Popular Stereo Receiver manuals by other brands

Marantz

Marantz CINEMA 70S owner's manual

Kenwood

Kenwood KMDX92 instruction manual

Pioneer

Pioneer AVH-Z7250BT owner's manual

Denon

Denon AVR-1311 owner's manual

Denon

Denon AVR-S760H owner's manual

Denon

Denon AVR-X7200W Service manual

Pioneer

Pioneer SC-LX904 Initial setup guide

Sony

Sony XAV-1500 operating instructions

Radio Shack

Radio Shack DX-399 owner's manual

Sony

Sony STR-DE535 - Fm Stereo/fm-am Receiver operating instructions

Pioneer

Pioneer SX-1000TA operating instructions

Sony

Sony STR-DE335 - Fm Stereo/fm-am Receiver operating instructions

Sony

Sony STR-DG500 - Multi Channel Av Receiver Service manual

Panasonic

Panasonic AJSD955B - DVCPRO50 STUDIO DECK Brochure & specs

Pioneer

Pioneer SX-838 Service manual

Sherwood

Sherwood S-2660CP operation instruction

Sony

Sony STR-K790 - Lifier Service manual

Pioneer

Pioneer XR-VS77 Service manual