Yamaha YHT-22 Assembly instructions

1ST DRAFT

QUICK-CONNECT GUIDE

YHT-22

YHT-22 QUICK-CONNECT GUIDE

INTRODUCTION

Yamaha developed the YHT-22 A/V Home Theater

package to turn your home into a theater. In addition

to enhancing the sound of a video source, like your

TV, DVD player, or VCR, the YHT-22 also superbly

reproduces audio sources, such as a CD player or a

cassette deck.

This Quick-Connect Guide will help you get started.

Study the speaker system plan (below), and then use

the interconnect diagrams (on the following pages) to

connect the receiver and speakers to your system.

For the video portion, you will need a DVD (or LD)

player or a hi-fi stereo VCR and a television or monitor.

Refer to the Yamaha HTR-5140 Owner’s Manual, as well as

the owner’s manuals that came with your other compo-

nents, for complete instructions and cautions. Be sure to

turn off all power while making connections.

Please keep this guide handy for future reference.

NOTE: Label the end of each speaker wire (i.e., left rear, right

front, etc.) before connecting them to the A/V receiver. For wire

runs over 30 feet, use larger 18- or 16-gauge speaker wire.

• Toggle bolts, molly anchor screws, sheet metal screws,

and/or speaker brackets (for securing the NS-A327

speakers to walls)

NOTE: If you are unsure of how to securely and safely fasten

speakers to a wall, please contact a reliable source about the best

type of hardware for your particular wall's construction.

Secure installation is the purchaser's responsibility.

TOOLS AND PARTS

The YHT-22 Home Theater package consists of (1) HTR-5140

A/V receiver with RAV200 remote control, (1) NS-AP327

package containing (4) 2-way NS-A327 front/rear channel

speakers, (1) NS-AC327 2-way center-channel speaker,

100' of speaker wire, (1) YST-SW45 Powered Subwoofer,

and related owner’s manuals. You will also need:

• Wire strippers (optional)

SPEAKER SYSTEM PLAN

NS-A327

(left side, same height as TV)

NS-A327

(right side, same height as TV)

L = Left Channel

R = Right Channel

C = Center Channel

S = Surround Channel

NS-A327

(on stand or wall, at least

ear level or preferably higher)

NS-A327

(on stand or wall, at least

ear level or preferably higher)

8'~10' apart

NS-AC327

(on top or below TV)

6'~8' apart

Couch

Listening Area

Sub

YST-SW45 Subwoofer (on floor)

YHT-22 QUICK-CONNECT GUIDE

CONNECTING AUDIO COMPONENTS

Yamaha HTR-5140 Receiver (Rear Panel)

NOTE: For your convenience, the Yamaha HTR-5140 receiver is equipped with

two switched ac outlets (100 W max.). If desired, use them to power on connected

components (e.g., CD player or turntable) each time the receiver is turned on.

However, do not use them for components equipped with clocks (e.g.,VCR).

L Out

Ground

Use RCA Audio Cables For Audio Interconnections

R Out

L Out R Out

L Out* R Out*

* Use Playback Or Line Out

** Use Line In

L In** R In**

RCA Cable Color Codes

Yellow = Video

White = Left Audio

Red = Right Audio

Turntable

CD Player (Changer)

Cassette Deck

YHT-22 QUICK-CONNECT GUIDE

CONNECTING THE YHT-22 SPEAKERS

NS-A327

(Front Right)

NS-AC327

(Center Channel)

NS-A327

(Surround Right)

NS-A327

(Surround Left)

NS-A327

(Front Left)

Set IMPEDANCE Selector

to top position

RearCenter

YST-SW45

(Subwoofer)

From

Amplifier

To Speakers

Clear

Wire

Clear/

Stripe

Wire

Clear

Wire

Clear/

Stripe

Wire

Clear

Wire

Clear/

Stripe

Wire

Clear

Wire

Clear/

Stripe

Wire

Clear

Wire

Clear/

Stripe

Wire

Speaker

Wiring

Initial

Settings

(on Front

Panel)

❶

Strip 1⁄4" off ends of

speaker wires.

❷Loosen terminals.

❸Insert speaker wires;

tighten terminals.

❶

❸

❷

RED = positive (+)

use clear wire

BLK = negative (–)

use clear with

white stripe wire

HIGH CUT

STANDBY/ON

50 Hz 150 Hz

VOLUME

010

YHT-22 QUICK-CONNECT GUIDE

CONNECTING VIDEO CABLES FOR VIDEO COMPONENTS

Yamaha HTR-5140 Receiver (Rear Panel)

NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line

position to record from another source connected to the Yamaha HTR-5140 receiver.

RCA Cable Color Codes

Yellow = Video

White = Left Audio

Red = Right Audio

Use RCA Video Cables And Jacks For Video Interconnections

Optional 75-ohm Coaxial Cable

Hi-Fi Stereo VCR

DVD or LD Player (or

Video Game Player)

Video In Video Out

Video Out

Video InANT In

ANT Out

(RF Out)

Monitor/TV

Satellite Receiver

YHT-22 QUICK-CONNECT GUIDE

CONNECTING A 5.1-CHANNEL DECODER

If you own a 5.1-channel decoder (or a unit which

incorporates a 5.1-channel decoder), you can connect

its discrete outputs to the HTR-5140 as shown below.

• To hear playback of a stereo or mono audio source

or one encoded with Dolby Pro Logic Surround*,

connect the unit (e.g., DVD player) to the DVD/LD

(or TV/DBS) AUDIO SIGNAL input terminals.

• The discrete signals feeding to the HTR-5140 cannot

be recorded by a tape deck, MD recorder, or VCR.

To record programs from a source (e.g., laserdisc

player), connect the source unit to the DVD/LD (or

TV/DBS) AUDIO SIGNAL input terminals.

• If your audio system does not include a subwoofer

(i.e., SUBWOOFER input terminals are not used), set

signal routing on the 5.1-Channel Decoder so that

the LFE channel feeds both LEFT and RIGHT MAIN

output terminals. For details, refer to the owner's

manual for your 5.1-Channel Decoder unit.

*Dolby Pro Logic Surround is a trademark of Dolby Laboratories Licensing Corp.

Yamaha HTR-5140 Receiver (Rear Panel)

RCA Cable Color Codes

Yellow = Video

White = Left Audio

Red = Right Audio

Use an RCA Video Cable And Jacks For Video Interconnections

Digital Audio Cable

(Optical or Coaxial)

DVD Player

Audio L Out Audio R Out

R Main Out

L Main Out

Sub Out

Center Out

R Surround Out

L Surround Out

Video Out

5.1-Channel Decoder

YHT-22 QUICK-CONNECT GUIDE

CONNECTING A DVD PLAYER

Yamaha HTR-5140 Receiver (Rear Panel)

RCA Cable Color Codes

Yellow = Video

White = Left Audio

Red = Right Audio

Use an RCA Video Cable And Jacks

For Video Interconnections

DVD Player

Video Out

Audio R Out*

Audio L Out*

Digital Audio Out (coaxial)

Digital Audio Out (optical)

*Analog Audio Out connections are required for playback of CD-Rs and recording

from DVD to VCR.

YHT-22 QUICK-CONNECT GUIDE

CONNECTING AUDIO CABLES FOR VIDEO COMPONENTS

Yamaha HTR-5140 Receiver (Rear Panel)

NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line

position to record from another source connected to the Yamaha HTR-5140 receiver.

Audio

R Out

Audio

L Out

Use RCA Audio Cables And Jacks For Audio Interconnections

RCA Cable Color Codes

Yellow = Video

White = Left Audio

Red = Right Audio

Audio L Out

Audio R Out

Audio

L In

Audio

R In

Audio

L Out

Audio

R Out

Hi-Fi Stereo VCR

DVD or LD Player (or

Video Game Player)

Satellite Receiver

YHT-22 QUICK-CONNECT GUIDE

CABLE HOOK-UP(BASIC AND PREMIUM CHANNELS)

Yamaha HTR-5140 Receiver (Rear Panel)

NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch

(on the VCR) to Line position to record from another source

connected to the Yamaha HTR-5140 receiver.

Audio

L In

Audio

R In

Audio

L Out

Audio

R Out

RCA Audio Cables

ANT In Video Out

Video In

Basic Cable

(From Wall Jack)

ANT In

Premium Cable

(From Wall Jack)

RCA Cable Color Codes

Yellow = Video

White = Left Audio

Red = Right Audio

RCA Video Cables

Audio

L In

Audio

R In

Audio

L Out

Audio

R Out

RCA Audio Cables

Video Out

Video In

RCA Video Cables

Hi-Fi Stereo VCR

(Tuner set to Channel 3 or 4)

Descrambler

(Channel 3 or 4

Output)

Converter

Box

YHT-22 QUICK-CONNECT GUIDE

PROGRAMMING THE RAV200 REMOTE CONTROL

SETTING UPCOMPONENTS

Perform the procedure for each component you own.

At the end of each step 5, the remote control’s processor

will automatically assign the selected component’s

control functions to its own buttons, ready for your use.

SETTING UPYOUR TV

1. Turn on the television set and look up a setup code

for your brand of television (see pages 113 and 114

of the HTR-5140 Owner’s Manual).

2. On the RAV200, press TV.

3. Press and hold both VOLUME buttons at least four

seconds until the indicator LED flashes twice.

4. Using the keypad, enter the four-digit setup code.

The indicator LED will flash twice after your entry.

If the LED did not flash twice, repeat steps 3 and 4.

5. To verify the code works, aim the RAV200 at the

television set, press TV, and then press POWER. The

television set should turn off. If it doesn’t respond,

use another code for the same manufacturer and

repeat steps 3 through 5.

The YHT-22 Home Theater package includes the

RAV200 pre-programmed remote control with factory

codes to control your HTR-5140 receiver and most

Yamaha audio components. To program other brands of

components (i.e., TV, VCR, etc.) or if your Yamaha unit

does not respond, you will need to program the remote

control with the manufacturer’s codes (listed on pages

113 through 117 of the HTR-5140 Owner’s Manual).

NOTE: The RAV200 is designed to control most major

brands of audio and video components. For other units, use

the original remote control supplied with the product.

POWER ON

1. Load the supplied batteries into the RAV200.

2. Aim the remote control at the HTR-5140, press

AMP/TUNER, and then press POWER.

3. The receiver should turn on.

Indicator LED

Use Keypad

To Enter

Setup Codes

Turns On

Component’s

Power

Component

Selector

Buttons

Use To Enter

Setup Mode

Use To Enter

Setup Mode

Table of contents

Popular Speakers System manuals by other brands

JVC

JVC CA-MXK5R instructions

LG NB4532B owner's manual

JVC

JVC CA-FSH100 instructions

5Core

5Core Pro Series Operation manual

EAW

EAW MQV1394e Specifications

Lynx

Lynx GXR-LA10A user manual

iLive

iLive ITB066B user guide

RDX

RDX QuickStation 4 product manual

Electro-Voice

Electro-Voice S-122 Specifications

Sven

Sven SPS-619 GOLD Operation manual

Pioneer

Pioneer CS-7070 instruction manual

EAW

EAW UB82e Technical specifications

Sondpex

Sondpex Active Speaker System and Digital Music... User manual and installation instructions

JVC

JVC NX-PN7 instructions

Marshall Amplification

Marshall Amplification AR-DM61-BT user manual

SE Audiotechnik

SE Audiotechnik I-LINE manual

Gemini

Gemini WRX-843 Series user manual

TCL

TCL 6100 Series user manual