Yamaha EAD10 Mounting instructions
EAD10 Firmware Update Guide
1
EAD10
Firmware Update Guide
EN
Thank you for choosing a Yamaha product.
This document explains how to update the firmware of the EAD10 and the update history.
NOTICE
•
Please save your important data onto the USB flash drive before updating the firmware of the EAD10.
•
This updater is to be used at the user’s own risk.
•
DO NOT power off or disconnect the cable from the product during the updating process. The EAD10
may be damaged.
•
DO NOT remove the USB flash drive from the product during the updating process. The EAD10 and
the USB flash drive may become inoperable.
•
If the update fails, and the EAD10 still does not operate correctly even after you execute the update
once again, please contact your Yamaha dealer.
•
This firmware and documentation are the exclusive copyrights of Yamaha Corporation.
•
Reproducing or modifying all or parts of this firmware or its documentation without permission is strictly
prohibited.
•
The company names and product names in this document are the trademarks or registered trademarks
of their respective companies.
EAD10 Firmware Update Guide 2
Included Files
This folder contains the following files:
•
ead10_en_update_guide_v***.pdf This document (PDF file)
•
the "***.PGM" file The update program
Required Items
•
USB flash drive formatted on the EAD10
Please check the URL below for a list of supported USB flash drives.
http://download.yamaha.com
After selecting your country and clicking on “Documents and
Data” from the “Support” page, enter the model name into the
search box.
Checking the Current Version
Hold down the [RECORDER] button and then turn the power on by pressing the Standby/On switch.
"Firm ver : *.**" indicates the current version of the firmware.
If the message does not appear, turn the power off by pressing the Standby/On switch and try again.
+
EAD10 Firmware Update Guide 3
Updating Procedure
NOTICE
Please save your important data onto the USB flash drive
before updating the firmware of the EAD10.
1.
After downloading, decompress the archived file, and then find the "***.PGM" file. Copy the
"***.PGM" file to the root of the USB flash drive.
2.
Make sure to turn the power off (the Standby/On switch is set to the Standby position,) and then
connect the USB flash drive to the [USB TO DEVICE] terminal on the rear panel.
3.
Hold down the [RECORDER] button, and then turn the power on by pressing the Standby/On
switch.
4.
Press the [ ] (Click) button to start the update process.
This process takes a few minutes.
5.
When the update process is completed, following message will appear.
6.
Check the version of the firmware and you can turn the power off.
This completes the update process.
EAD10 Updater
Completed.
Boot *.** →*.**
Firm *.** →*.**
Reboot.
EAD10 Firmware Update Guide 4
Main Enhancements
v1.02 ➜v2.00
•
Continuous recording time when using a USB flash drive has been extended to 90 minutes.
•
New Talkback function.
•
New Pad function for switching Talkback on/off.
•
New Noise Gate adjustment function.
•
New Click Out routing function.
•
Solved some minor problems.
v1.00 or v1.01 ➜v1.02
•
Improved the accuracy of the Click Tempo.
•
Solved some minor problems.
Manual Development Group
©2018 Yamaha Corporation
Published 11/2019 YJ-B0
Other manuals for EAD10
2
Table of contents
Other Yamaha Recording Equipment manuals
Yamaha
Yamaha TX-802 User manual
Yamaha
Yamaha SPX90 User manual
Yamaha
Yamaha QX-3 User manual
Yamaha
Yamaha LC3 Music lab User manual
Yamaha
Yamaha TX-7 User manual
Yamaha
Yamaha GW33 User manual
Yamaha
Yamaha MDR-10 User manual
Yamaha
Yamaha VCJ5740 User manual
Yamaha
Yamaha TG300 User manual
Yamaha
Yamaha DSR1 User manual
Yamaha
Yamaha POCKETRAK W24 User manual
Yamaha
Yamaha MT44D User manual
Yamaha
Yamaha MU128 User manual
Yamaha
Yamaha FX550 User manual
Yamaha
Yamaha DSR1 User manual
Yamaha
Yamaha EMT-10 User manual
Yamaha
Yamaha C20A User manual
Yamaha
Yamaha QY-8 Assembly instructions
Yamaha
Yamaha Silent Brass ST5 User manual
Yamaha
Yamaha GW50 User manual
