Yamaha Disklavier E3 Technical manual

Update Manual

Introduction ......................................................................................................................................... 2

Updating the Disklavier ...................................................................................................................... 3

Video Synchronized Recording........................................................................................................... 5

Video Synchronized Playback ............................................................................................................ 9

Setting the Disklavier for Audio Data Reception/Transmission ................................................... 10

Converting MIDI Data to a Standard Form (Strip XP)..................................................................... 11

Switching the Languages for the Screen ........................................................................................ 13

Table of Contents

Version 2.10 offers an expansion of the features available in the Disklavier E3

and increases the performance reliability of the Disklavier E3. The followings

are the new features in version 2.10:

• Video synchronized recording and playback features (Pages 5 – 9)

• Flexible audio input (OMNI IN) and output (OMNI OUT) setting (Page 10)

• “Strip XP” features (Page 11)

• Switchable language setting for the screen (Page 13)

First, update your Disklavier following the procedures on page 3.

Introduction

Important:

Be sure NOT to turn off the Disklavier

during the update.

First you need to update the Disklavier firmware using update program

(downloaded and saved from the website onto a USB flash memory, or

downloaded directly to the Disklavier via Internet).

Note:

For this operation you have to

download update program via Internet

in advance, and shut down the

Disklavier.

Note:

Be sure to make backups of the song

before updating.

Make sure that Disklavier is shut down.

Holding [PLAY/PAUSE] on the control unit, press [ON/OFF].

The current version information of each module appears one after the

other.

Make sure that the update program is prepared, then press

[ENTER].

The starting screen appears.

Press [ENTER] again.

After a while, the update confirmation message of each module

appears.

Updating the Disklavier

Shut down the Disklavier [PLAY/PAUSE] and [ON/OFF]

Hold

CTRL system V1.10

(ENT)*UPDATE

  



V1.10

(PLAY,STOP)CTRL-SURE?

V2.10

Continued to next page

Press [PLAY/PAUSE] to update, [STOP] to skip to the next

module.

When the update of the selected module completes, the update

confirmation message of the next module appears. Repeat steps 4

and 5.

The closing screen appears when the update for all modules

completes.

Restart the Disklavier.

V1.10

DO NOT REMOVE DISK! 3500

V2.10



   



For details on video synchronized

playback, see “Video Synchronized

Playback” on page 9.

By recording a song played on the Disklavier synchronized with the video

recording, later on, you can enjoy piano playback with the video. First set up

the camcorder, the DVD recorder, and the Disklavier, and then start recording

by following the procedures below.

■Setting for Video Synchronized Recording

Press [SETUP] on the remote control.

The setup menu screen appears.

Select “AudioI/O” with the cursor buttons ([ ] [ ] [ ]

[ ]), then press [ENTER].

The audio I/O setting screen appears.

Select “OMNI IN” with the cursor buttons ([ ] [ ]), then

press [+/YES] and [–/NO] to change setting to “AutoDetect”.

Video Synchronized Recording

Connect a camcorder and a DVD recorder[SETUP] “AudioI/O”



 



  

{



 



  

{

 

  

 

]

 

  

 

]

Continued to next page

Select “OMNI OUT” with the cursor buttons ([ ] [ ]), then

press [+/YES] and [–/NO] to change setting to “SYNC”.

Press [ENTER] to complete the operation.

Note:

Confirm the shape of input/output

connectors on the camcorder and the

DVD recorder, and prepare the cables

fit to them.

Connect a camcorder and a DVD recorder to the control unit.

 

  

 

]

[

(for displaying)

RCA cord

(not supplied)

Control unit

RCA cord

(not supplied)

audio

output

To video

input

audio

input

To A/V

output

To video

input

video

output

DVD recorder

(for recording and playback)

Video

connector

(yellow)

Video cord

(not supplied)

A/V cord

(supplied with the

camcorder)

Camcorder

(for shooting)

Continued to next page

■Starting Video Synchronized Recording



To select a medium and album, see

Chapter 3 “Basic Song Playback –

Selecting Medium and Their Contents”

on operation manual.

Select a destination medium and album.

Press [RECORD].

The video synchronized recording standby screen appears, and

[RECORD] on the control unit lights red, and [PLAY/PAUSE] flashed in

green.

Set the camcorder to video shooting mode.

Select the video input on the DVD recorder which the

camcorder is connected to, then start recording on the DVD

recorder.

Press [PLAY].

[PLAY/PAUSE] stops flashing, and the counter starts to advance.

Note:

This step is necessary for

synchronization of the song and the

video playback, and should not be

omitted.

Wait for approximately ten seconds, and then start playing

your song.

Press [STOP] when you finish playing your song.

Stop recording on the DVD recorder.

(New Song)

=Record=(SYNC) SO

<00:00>

LR 99%

A01-005

(New Song)

=Record=(SYNC) SO

<00:00>

LR 99%

A01-005

Continued to next page

■Using the Camcorder only

If your camcorder has both mic input and audio output, you can

perform video synchronized recording using the camcorder only.

1. Set the Disklavier following the procedures 1 to 5 on page 5.

2. Connect a camcorder to the control unit.

3. Select a destination medium and album.

4. Press [RECORD].

5. Start recording on the camcorder.

6. Press [PLAY].

7. Wait for approximately ten seconds, and then start playing your

song.

8. Press [STOP] when you finish playing your song.

9. Stop recording on the camcorder.

Camcorder

RCA cord with

resistance

(not supplied)

To mic/line

input

To audio

output

Control unit

RCA cord

(not supplied)



For details on video synchronized

recording, see “Video Synchronized

Recording” on page 5.

You can enjoy piano playback with the video recorded on the DVD recorder.

Perform the video synchronized recording in advance.

Note:

Be sure to rewind the video cassette to

locate the beginning of the recording.

It may take some time before piano

playback starts if you start playback

halfway through the video.

Make sure that the OMNI IN setting is set to “AutoDetect”.

Note:

When using the song copied to the

USB flash memory, it may take some

time until the Disklavier recognizes the

information for synchronization.

Turn down the volume completely on the TV if you connect

the audio output of the DVD recorder to the TV.



See “Setting for Video Synchronized

Recording” on page 5.

Turn down the volume completely on the camcorder if you use the

camcorder only.



If the piano playing is not

synchronized with the video picture,

adjust the offset time for

synchronization. See “Setting the

Disklavier for Audio Data Reception/

Transmission” on page 10.

Start playback on the DVD recorder.

Start playback on the camcorder if you use the camcorder only.

The Disklavier automatically searches and selects the song paired

with the video, and then starts playback as well.



If noises (synchronized signal) are

heard during video synchronized

playback, turn down the signal level

and re-record. See “Setting the

Disklavier for Audio Data Reception/

Transmission” on page 10.

Note:

You cannot operate the Disklavier

using the control unit or remote control

during video synchronized playback. If

you want to stop playback of the song,

stop playback on the DVD recorder (or

the camcorder).

Video Synchronized Playback

PIANO005.MID





 



You can select the kind of the incoming/going out audio signals. The following

options are available in version 2.10.

OMNI IN

Auto Detect: Select this when you make the Disklavier detect the input signal

automatically.

OMNI OUT

SYNC: Select this when you output the SMPTE signal used for video

synchronization playback.

SYNC IN Offset

Adjusts the length of the offset time that leads the actual playback of entire

recording. The offset time can be set in a range of –500ms to +500ms.

Decrease this value to delay the piano playing, and increase to advance the

piano playing.

SYNC OUT Level

Adjusts the output level of the SMPTE signal. For normal use, the adjustment

of this option is not required. If noises (synchronized signal) are output from

the OUTPUT jacks during video synchronized playback, turn down the level

and re-record.

Setting the Disklavier for Audio Data Reception/Transmission

(Additional Features)

[SETUP] “AudioI/O”

Other manuals for Disklavier E3

Table of contents

Other Yamaha Musical Instrument manuals

Yamaha

Yamaha Venova YVS-100 User manual

Yamaha

Yamaha PSR-S710 User manual

Yamaha

Yamaha YT-280D User manual

Yamaha

Yamaha AW 1600 User manual

Yamaha

Yamaha Silent Bass SLB-100 User manual

Yamaha

Yamaha AvantGrand NU1X VAP9780 User manual

Yamaha

Yamaha Clavinova CLP-970AM Installation and operation manual

Yamaha

Yamaha AES620 User manual

Yamaha

Yamaha disklavier MX-100B User manual

Yamaha

Yamaha Electone EL-90 User manual

Yamaha

Yamaha Electone E-50 User manual

Yamaha

Yamaha Clavinova CVP-205 User manual

Yamaha

Yamaha Silent Series User manual

Yamaha

Yamaha Clavinova CVP-601 User manual

Yamaha

Yamaha PSR-S750 User manual

Yamaha

Yamaha Arius YDP-135 User manual

Yamaha

Yamaha YPP-55 User manual

Yamaha

Yamaha Disklavier E3 Technical manual

Yamaha

Yamaha AVANTGRAND NU1X User manual

Yamaha

Yamaha Electone B-6E series User manual

Yamaha

Yamaha P-125 User manual

Yamaha

Yamaha Electone B-30AR User manual

Yamaha

Yamaha Electone C-35 User manual

Yamaha

Yamaha YPP-35 User manual

Popular Musical Instrument manuals by other brands

Kawai

Kawai CN17 Operation guide

Korg

Korg SP-170S owner's manual

Roland

Roland ep-97 owner's manual

Roland

Roland LX-15 Brochure & specs

Johannus

Johannus Rembrandt 200 user manual

Casio

Casio celviano ap-700 user guide

Modulus

Modulus Quantum Series owner's manual

Gear4music

Gear4music SDP-4 user manual

HOMCOM

HOMCOM 390-006 Assembly instruction

Xotic Guitars

Xotic Guitars ProVintage Series owner's manual

Sadowsky

Sadowsky MetroLine Series operating manual

Bosendorfer

Bosendorfer CEUS user manual

Gewa

Gewa UP 260 G owner's manual

Casio

Casio TONEBANK MT-750 Operation manual

Alesis

Alesis AHB-1 Assembly guide

Roland

Roland V-Accordion FR-1x owner's manual

Samick

Samick DCP-12 manual

thomann

thomann DP-50 user manual