XZENT X-402 User manual
Bedienungsanleitung
2-DIN Naviceiver X-402
XZENT by ACR AG · Bohrturmweg 1 · Bad Zurzach · Switzerland
www.xzent.com
USER MANUAL
X-402
Manual 402_de_en.indd 1 08.08.16 13:38
2
ABOUT THIS MANUAL
This manual contains important information and warnings about the operation of this XZENT unit.
Please store it in a place where you have access later on.
REMOTE CONTROL 4
X402-HDMI FRONT PANEL HARD KEYS 6
MAIN MENU 7
FM/AM TUNER MODE 8
FM/AM TUNER Operation Buttons 8
FM/AM Tuner Setup (PopUp) 9
DAB TUNER MODE 10
USB / Disc / IPod MODE 12
BT MODE 16
Front-Rear-Camera MODE 20
SETUP MODE 21
Note 1.The descriptions and other content shown in this manual may deviate from the real device.
2.Pictures shown in this manual and some HMI screenshots may deviate from the real unit.
3.Specifications and technical design of this device model are necessarily subject to
change without notice.
CONTENT
Manual 402_de_en.indd 2 08.08.16 13:38
3
nRead the instructions entirely. Heed all warnings. Follow the instructions.
nRetain this manual. Whoever will use the unit should have access to this manual.
nThis unit is designed to be functional in vehicles with 12 V DC battery and negative ground.
nDo not operate the unit in any other way than described in this manual. Failure to follow the in-
structions as provided may void your warranty.
nDo not disassemble or alter the unit in any way because this will void your warranty. Do not
attempt to repair or to service the unit yourself, but contact an authorized XZENT dealer instead.
nUse only original accessories which are designed and manufactured for the unit, otherwise you
will risk damage. Install the unit according to the mounting instructions by using the supplied
mounting accessories. Acceleration forces during accidents can be huge. Incorrectly mounted
devices pose a serious risk for the driver and passengers during an accident.
nProtect the unit from water and other liquids that could enter the housing. A short circuit or even
a fire could result.
nTo prevent a short circuit, never insert any metallic object (such as coins or metal tools) into the
unit.
nBefore you replace a defective fuse try to find the cause for the short circuit. Pay attention to the
cables of the power supply! If the short circuit does not result from a failure of the power supply
or wiring, you can replace the defective fuse with a new one (of identical value). If the short-
circuit persists, contact an authorized XZENT dealer.
nWhen connecting to any other device, read the user‘s guide for compatibility and notes on
electrical connections. Do not try to connect incompatible products.
nBe careful not to drain the car battery while using the unit when the car engine is turned off.
Because the unit consumes a considerable amount of energy and the battery will be charged
only while the engine is running, it might happen that the battery will discharge to a point
where it is not possible to start the engine anymore.
nAccording to the law in different European countries, driving with monitors showing movies
in the viewing range of the driver is not allowed, because the driver might get distracted from
traffic. Please respect the traffic regulations of your country or you may face legal penalties in
case of accidents or even lose your insurance coverage. Pay attention to the playback volume
inside your vehicle since you are required to notice exterior warning sounds like police sirens etc..
nDon‘t expose the unit to hard impacts. A mechanical or electrical malfunction of the unit could
be the result.
nThis unit utilizes a laser of class 1 category. Performance of procedures other than those
specified herein may result in hazardous exposure to coherent light. Do not open covers and
do not attempt to repair anything by yourself. Refer servicing to qualified personnel.
nShould any problems or questions occur during the installation, please consult your XZENT
dealer/importer.
SAFTY INFORMATION
Manual 402_de_en.indd 3 08.08.16 13:38
4
REMOTE CONTROL
Manual 402_de_en.indd 4 08.08.16 13:38
5
Operation buttons
1. POWER Device ON/OFF
2. EJECT Eject disc
3. MUTE Mute/Un-mute audio output
4. SRC Change sources
5. KEYPAD DVD input track/chapter/title
6. VOL+ Increase volume
7. VOL– Decrease volume
8. INFO Show DVD info
9. SRCH DVD input track/chapter/title
10. STOP/BAND Stop DVD/change radio band
11. SEL Open EQ
12. ESC Close DVD menu
13. MENU Open main menu
14. PIC No function
15. REPEAT A-B No function
16.OK Play/Pause;conrminDVDmenu
17. DIRECTION BUTTONS Move cursor in DVD menu
18. TITLE Open DVD menu
19. ROOT Open DVD menu
20. REPEAT DVD repeat track/chapter/title
21. SKIP NEXT Media player: jump to next track/chapter/title
Tuner: jump to next preset station
22. SKIP PREVIOUS Media player jump to previous track/chapter/title
Tuner: jump to previous preset station
23. FAST REVERSE DVD fast reverse
24. FAST FORWARD DVD fast forward
25. AUDIO Change DVD audio language
26. ZOOM No function
27. ANGLE Change DVD viewing angle
28. SUB-T Change DVD subtitle
Manual 402_de_en.indd 5 08.08.16 13:38
6
Operation Buttons/ touch-area Buttons:
1. Power: Long Press to turn OFF/ON device
Short Press to Mute device
2. Home: Short Press to enter MAIN MENU, Long Press to enter NAV Menu
3. Volume “+” Press to Volume UP
4. Volume “-”: Press to Volume DOWN
5. HDMI: Press to enter in SOURCE HDMI
6. POWER RESET: Press to perform a reset
Various:
A Disc Slot
B. Built-In Mic
C. Infrared sensor
D NAV Card micro SD
E Disc indicator LED (dual L/R)
X402-HDMI FRONT PANEL HARD KEYS
MAP
HDMI
1
2
BA
3
4
5
C
E
D
6
Manual 402_de_en.indd 6 08.08.16 13:38
7
Enter Source Menu
2) Front panel key Tap on Home- button to enter Source Menu
Fix- MAIN MENU Operation buttons left area
A Date/Clock- Time Tap to open Full-screen with Date and Clock- Time, Tap and hold
to enter TFT-Standby. Longpress to display clock in full screen.
B. Day/Night Tap to toggle TFT brightness Day / Night / Auto
MAIN MENU Operation buttons area
Slide on touchscreen left or right to change the displayed page
Press on the page indicators to change the displayed page
1. Navigation Tap to enter Navigation source
2. FM/AM Tuner Tap to enter FM/AM Tuner source
3. DAB Tuner Tap to enter DAB Tuner source
4. Bluetooth Tap to enter BT source
5. USB Tap to enter USB source
6. DISC Tap to enter Disc source
7. iPod Tap to enter iPod source
8. HDMI Tap to enter HDMI source
9. AV Tap to enter AV source
10. Rear CAMERA Tap to enter Camera source
11. Demo Tap to enter Demo source
12. Setup Tap to enter Setup source
MAIN MENU
A
B
1
3
5
2
4
6
A
B
7
9
11
8
10
12
Manual 402_de_en.indd 7 08.08.16 13:38
8
FM/AM TUNER Operation buttons
1. Switch DAB/FM Tap to change between FM/DAB directly
2. BAND Tap to switch radio band (FM1 > FM2 > FM3 > AM1 > AM2)
Band= Shows active Band
3. Scala Slide Scala left or right to scan for next Station
4. Preset Tap to select Preset
Tap & hold to save current frequency as Preset
5. Tuner Setup Tap to open pop up for Tuner settings
6. PREV/ Adjust down Long- press to scan previous available station
Tap to adjust frequency 50 kHz down
7. NEXT/Adjust up Long- press to scan next available station
Tap to adjust frequency 50 kHz up
8. Key- pad Tap to open Key- pad and set Frequency directly
9. RDS-text TaptoopenRDS-texteld,radiotext,ifavailable
Information fi elds
10. Source Info Show the active source
11. Clock Time Shows clock time, sync with GPS signal
FM/AM TUNER MODE
1
3
5
2
4
6
44
444
78 9
1110
13
Manual 402_de_en.indd 8 08.08.16 13:38
9
FM/AM Tuner Setup (PopUp)
1. EQ Tap on EQ to enter in Equalizer
2. Auto Store Tap on Start to Auto store preset buttons
3. Mode Tap to switch between LOC/DX
4. Band Tap to switch radio band (FM1 > FM2 > FM3 > AM1 > AM2)
5. AF Tap to turn off/on AF function
6. TA Tap to turn on/off TA function
7. close Tap to hide Tuner Setup
Note:
nSelected and active items are highlighted in orange.
nThis unit features an RDS tuner. RDS is a system which transmits data on top of the FM radio
signal. Availability and content of the RDS data depend on the respective broadcast station
and its signal strength. RDS does, for example, transmit alternative frequencies, which allow
for frequency changes without user interaction. AM band doesn´t support any RDS function.
nYou need to have the AF function activated in order to use the RDS functionality and features.
1
3
5
2
6
4
7
Manual 402_de_en.indd 9 08.08.16 13:38
10
DAB TUNER MODE
DAB TUNER Operation buttons
1. Switch DAB/FM Tap to change between FM/DAB directly
2. Preset Tap to select Preset
Tap & hold to save current station as Preset
3. DAB Setup Tap to open pop up menu for DAB settings
4. PREV/ Adjust down Tap to play previous Station in same Ensemble
Long- press to jump to previous available Ensemble
5. NEXT/Adjust up Tap to play next Station in same Ensemble
Long- press to jump to next available Ensemble
6. DAB-List Short press to see scan result list
Long press to start comfort scan
7. DLS-text TaptoopenDLS-texteld,radiotext,ifavailable
Information fi elds
8. Source Info Show the active source
9. Clock Time Shows clock time, sync with GPS signal
10. Signal Quality Show: Black= No Antenna/ Signal
Red= bad reception> No Audio or many dropouts
Orange= reception> some audio dropouts may occure
Green= Good reception>
11. Slideshow Show Picture of Station; if available
12. Ensemble Active Folder of DAB channel> 8C=DR Deutschland
13. Played Station Shows station name and radio text of Ensemble from 12.
1
12
3
13
2
4
22
222
56 7
98
11
10
Manual 402_de_en.indd 10 08.08.16 13:38
Table of contents
Languages:
Other XZENT Car Navigation System manuals
