SAFETY INSTRUCTIONS
This symbol, wherever it appears,
alerts you to important operatin and
maintenance instructions in the
accompanyin literature. Read the
manual.
Detailed Safety and Operation Instructions:
All the operation instructions and sa ety should be read be ore the machine is operated.
Follow instructions:
All operation and user instructions should be ollowed by the user or the installer.
Retain Instructions:
The sa ety and operating instructions should be care ully retained or uture re erence.
Heed Warnin s:
All warnings on the machine and in the operating instructions should be adhered to.
Water and Moisture:
The machine should not be used near water or in place ull o moisture.
Ventilation:
The machine should be placed so that its location does not inter ere with its proper ventilation. For
example, the appliance should not be situated on a bed, carpet, or similar sur ace that may create an
obstacle or the ventilation openings: or placed in a built-in installation, such as a bookcase or cabinet that
may impede the low o air around the machine.
Heat:
The machine should be situated ar away rom heat sources such as heat registers, radiators, stoves, or
other machines (including ampli iers) that produce heat.
Power Source:
The machine should be connected to a power supply only o the type described in the operating
instructions or as marked on the external power trans ormer.
Power-Cord Protection:
Power supply cord should be routed so that it is not likely to be walked on or pinched by items placed
upon or against it, paying particular attention to cords, power trans ormer and plugs and the point where
they exit rom the appliance.
Cleanin :
The machine should be cleaned only as recommended by the manu acturer.
Non-use Periods:
The external power trans ormer should be unplugged rom the outlet when le t unused or a medium or
long period o time.
Object and Liquid Entry:
Care should be taken so that objects do not all and liquids are not spilled into the enclosure through
openings, do not leave bottles or cans upon the unit.
Dama es that Require Service:
The unit should be serviced by quali ied service personnel in the ollowing cases:
1. The external power trans ormer, power supply cord or the plug has been damaged.
2. The enclosure o the unit has been damaged.
3. The unit has been exposed to water or moisture.
4. The unit does not appear to operate normally or exhibits a marked change in per ormance.
5. Objects have allen, or liquid has been spilled into the unit.
Servicin :
The user should not attempt to service the unit beyond what is described in the Operating Instructions. All
other servicing should be re erred to quali ied and authorized service personnel.
2 – 3D ENHANCER USER’S MANUAL
