Xterra MB8.5 User manual
MB8.5 INDOOR CYCLE
OWNER’S MANUAL
PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW INDOOR CYCLE
Table Of Contents
1
2
3
5
10
16
17
ATTENTION
THIS INDOOR CYCLE IS INTENDED FOR RESIDENTIAL USE ONLY AND IS
WARRANTED FOR THE APPLICATION. ANY OTHER APPLICATION VOIDS THIS
WARRANTY IN ITS ENTIRETY.
Product Registration
Important Safety Instructions
Important Operation Instructions
MB8.5 Assembly Instructions
Operation of Your New Indoor Cycle
Troubleshooting
Manufacturer’s Limited Warranty
MB8.5 Indoor Cycle
1
Record Your Serial Number
Please record the Serial Number of this tness product
in the space provided below.
Serial Number
Register Your Purchase
The self-addressed product registration card must be completed in full and returned to
XTERRA Fitness. You can also go to www.xterratness.com/warrantyreg.html
to register online.
Thank you for your purchase of this quality indoor cycle. Your new indoor cycle has been
manufactured by one of the leading tness manufacturers in the world and is backed by one
of the most comprehensive warranties available. XTERRA Fitness will do all we can to make
your ownership experience as pleasant as possible for many years to come.
If you have any questions about your new product or questions about the warranty contact
XTERRA Fitness at 1-800-258-8511. If you have a technical problem with your new indoor
cycle contact XTERRA Fitness technical service at 800-258-8511.
Please take a moment at this time to record below the name of the dealer, their telephone
number, and the date of purchase for easy contact in the future. We appreciate your
condence in XTERRA Fitness and we will always remember that you are the reason that we
are in business. Please complete and mail your registration card today and enjoy your new
indoor cycle.
Yours in Health,
XTERRA Fitness
Congratulations On Your New Indoor Cycle and Welcome to the XTERRA Fitness Family!
Product Registration
MB8.5_20130605
Purchase Location
Purchase Date
2
MB8.5 Indoor Cycle
WARNING - Read all instructions before using this appliance.
1. Use this equipment only for its intended use as described in this manual. Do not
attempt to ride this bike at high pedal speeds until you have ridden the bike for some
time and are comfortable riding at slower pedal speeds.
2. The bike is NOT equipped with a freewheel system which means that when the
ywheel is in motion, the pedals will be in motion. Do not attempt to stop the unit by
applying backward pressure to pedals while they are turning as knee injury may occur.
Do not attempt to remove your feet from pedals while they are moving.
3. Wait for ywheel to coast to a stop before dismounting the bike. If you want to stop the
ywheel, push down on the brake knob.
4. Serious injury or death may occur from over-training. Consult a medical doctor or
qualied tness instructor to determine an exercise program appropriate for your level
of tness.
5. Do not attempt to turn the pedal cranks by hand. Do not touch any driving mechanism
while it is in motion as possible injury could occur.
6. In a home setting, keep children away from the bike when it is not in use. Keep
children and pets away from the unit while it is in use.
7. Do not attempt to perform dip movements on handlebars.
8. Never drop or insert any object into any opening of the bike.
9. Only use the bike on a stable, level oor.
10.Follow instructions for safe use of the equipment including proper seat position,
handlebar position, and use of foot positioning system of pedals. Do not attempt to
pull up handlebar post and seat post over the ‘MAX.’ graduation.
11. For safe operation, allow for at least 1foot (30cm) of free space to either side of the
unit and 2 feet (60cm) of free space to the rear of the unit.
Regularly examine the bike for damage and wear. Inoperable components should be
replaced immediately or the equipment should not be used until it is repaired.
Failure to follow all guidelines may compromise the effectiveness of the exercise
experience, expose yourself (and possibly others) to injury, and reduce the longevity
of the equipment.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
Important Safety Instructions
MB8.5 Indoor Cycle
3
1. Obtain a complete physical examination from your medical doctor and enlist a health/
tness professional’s aid in developing an exercise program suitable for your current
health status.
2. When working out for the rst time, start out slowly for a minimum of ve minutes.
After your muscles are warmed up, gradually increase the pedaling speed and/or
resistance.
3. The speed and duration of your exercise program should always be subject to how
you feel. Never permit peer pressure to exceed your personal judgment while
exercising.
4. Overweight or severely de-conditioned individuals should be particularly cautious
when using the equipment for the rst time. Even though such individuals may not
have histories of serious physical problems, they may perceive the exercise to be far
less intense than it
really is, resulting in the possibility of overexertion or injury.
5. Proper installation and regular maintenance are required to ensure user’s safety.
Maintenance is the sole responsibility of the owner.
Important Operation Instructions
WARNING - AS THE OWNER OF THIS EXERCISE EQUIPMENT, YOU SHOULD
INSIST THAT ALL USERS FOLLOW THE SAME GUIDELINES: YOU SHOULD MAKE
THIS MANUAL AVAILABLE TO ALL USERS.
4
MB8.5 Indoor Cycle
MB8.5 Assembly Pack Checklist
Hardware Step 1
#81. 3/8” x 3-1/2”
Button Head Socket Bolt (4 pcs)
#82. 3/8”
Nut (4 pcs)
Hardware Step 2
#91. M5 x 10mm
Screw (2 pcs)
Hardware Step 3
#48. 5/16” x 16mm
Flat Washer (4 pcs)
#49. 5/16”
Split Washer (4 pcs)
#88. 5/16” x 5/8”
Screw (4 pcs)
#85. Wrench #86. Combination M5 Allen Wrench
& Phillips Head Screw Driver
#83. 3/8” x 23mm
Curved Washer (4 pcs)
Assembly Tools
MB8.5 Indoor Cycle
5
1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along the dotted Line. Lift
Box over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged
parts are found, or parts are missing, contact your dealer immediately.
3. Locate the hardware package. Remove the tools rst. Remove the hardware for each step as
needed to avoid confusion. The numbers in the instructions that are in parenthesis (#) are the item
number from the assembly drawing for reference.
Pre-Assembly
82
82
83
83
81
81
Hardware Step 1
1. Attach the Front ( the one with the wheels mounted in the bottom of the
tube) & Rear oor stabilizer tubes by inserting two Button Head Socket
Bolts (81) through each tube. Fasten two Curved Washers (83) and two
Nuts (82) on each tube using the wrench (85) provided.
Stabilizer Tubes
#82. 3/8” Nut (4 pcs)
#81. 3/8” x 3-1/2”
Button Head Socket
Bolt (4 pcs)
#83. 3/8” x 23mm
Curved Washer
(4 pcs)
MB8.5 Assembly Instructions
1
1. Attach the Rear Stabilizer cover with two Screws (91). Tighten using the
Combination M5 Allen Wrench & Phillips Head Screw Driver (86).
Rear Stabilizer Cover
2Hardware Step 2
#91. M5 x 10mm
Screw (2 pcs)
91
6
MB8.5 Indoor Cycle
Handlebar
3Hardware Step 3
#49. 5/16” Split
Washer (4 pcs)
#48. 5/16” x 16mm
Flat Washer (4 pcs)
#88. 5/16” x 5/8”
Screw (4 pcs)
1. Attach the handlebars (make sure they are oriented as in the illustration)
with four Screws (88), four Split Washers (49), and four Flat Washers
(48). Tighten rmly using the Combination M5 Allen Wrench & Phillips
Head Screw Driver (86).
Water Bottle Holder
4
1. Place the water bottle slightly to the right of center when looking at the
bike from the rear.
MB8.5 Indoor Cycle
7
25(R)
Left/Right Pedals
5
25(L)
1. Attach the Right and Left pedals to the appropriate crank. The
pedals have an “R” and an “L” stamped on the end of the threaded
area to distinguish them. Check the illustrations to make sure you are
attaching each to the correct side. Note: the left side has left hand
threads; therefore you will screw it on in a counterclockwise direction.
Tighten each pedal as rmly as possible with the Wrench (85) provided.
If you here a thumping sound when you are pedaling, this usually means
one or both pedals are loose. You may need to retighten them after use.
8
MB8.5 Indoor Cycle
5
6
4
3
2
1
Console
6
1 – Console
2 – Mounting Clamp
3 – Clamp mounting screw
4 – Clamping thumb screw
5 – Velcro
6 – Speed transmitter
Other manuals for MB8.5
1
Table of contents
