www.xprgroup.com 4
This product herewith complies with requirements of EMC directive 2014/30/EU, Radio Equipment Directive 2014/53/EU. In addition it complies with RoHS2 directive EN50581:2012 and RoHS3 Directive 2015/863/EU.
*Important: These accessories are not included with the readers!
SOFTWARE SETTINGS
XPR Toolbox is software for settings and irmware update of the reader. XPR Toolbox can be downloaded from a
https://software.xprgroup.com/. To setup the reader or update the irmware, run the XPR Toolbox and select ”Genera-
tion 2” and the appropriate model, and click on “Open” tab. Follow the instruction in the software to set up or update
irmware. Connect the reader to PC using Micro USB connector. No additional power for the reader is required. If the
reader is used with EWS Controller, reader setting must be done by PROSCS software.
ACCESSORIES (Optional)*
•MTSPACER Surface mounts spacer for the MINI range housing. It’s the perfect accessories to install easily your
MINI range reader. It has six break-out openings for sheathed cabling. Smart and easy to install.
•MCMINI Mini metal covers for
the MINI Range.
Metal protection Covers for Single
MINI range readers.
A304 brushed steel, compulsory
cover for biometric MINI range for
outside use.
53.42
97.92
R4.10
R2.40
70.0711.73
33.40
9.12
59.84
A
A
BB
CC
3(M3x3mm)
2(3mm x 4mm)
12
96.92
9.01
9.04
6.30
4.80
50.37
SECTION
A-A
Breaking Wall for cable
16.50
SECTION
B-B
Braking Wall for Cable
Braking Wall for Cable
TRUE R3.99
8.15
9
19
SECTION
C-C
Braking Wall for Cable
Braking Wall for Cable
• USP Optional single metal plate
to it single US electrical gang
boxes. Also ideal for retroit to
cover pre-or old installation (small
wall damages, chips, paint work,
etc.) USP are supplied in the same
color as the readers used for a
blending aesthetic design.
70.00
115.00
