Xinuo HM-5818 User manual

ECDIS (Electronic Chart Display and Information System)

◆HM-5818( 19”24” )

User Manual

ECDIS User Manual

User Instructions:

Unless hereby stated, no part of this manual can be reproduced, printed, copied, sent,

disseminated, downloaded or stored on any media without prior written authorization of

Xinuo Information Technology (Xiamen) Corporation Limited. As permitted by Xinuo

Information Technology (Xiamen) Corporation Limited, simplified copies of this manual

can be downloaded to hard disks or other electronic media for browsing, or this manual

and its revisions can be printed. The ownervessel of copyright shall be specified in all

reproductions. This manual or any of its revisions is prohibited from being used for

commercial purposes.

This manual is subject to change without notice. You can get the updates and the

information on how to use or operate this product and others from www.xinuo.com, the

website of Xinuo Information Technology (Xiamen) Corporation Limited.

Warning: Please read the notes of this manual carefully to know about safety statements

and other important information of products.

Declaration: All words like “Xinuo” and “Xinuo Hangke” mentioned here below

refer to as “Xinuo Information Technology (Xiamen) Corporation Limited”.

Note: This set of equipment shall not be directly used for navigation.

In practices, please use the equipment in combination with other navigation equipment

and actual marine conditions such as paper chart, portable beacon, radar, tide,

hydrological conditions and weather.

Declaration: Names of other products and companies mentioned in this user manual are

only used for identification. They possibly belong to registered trademarks or copyrights of

other companies.

Names and versions of software are just displayed on a display, but not described in this

manual in detail.

Explanation of the mark used in this manual:

【】: Titles of quoted menus. For example, 【Basic Menu】is the basic menu called from

a system.

ECDIS User Manual

Notes:

Before starting the vessel borne navigation equipment, be sure to read following notes

carefully to avoid product failures arising from improper operation:

1. Please don’t place the vessel borne navigation equipment at random without

fastening, in order that the equipment won’t be severely damaged when it falls off

because of tossing or other factors during the navigation.

2. Please don’t use any other power adapter which is not equipped for this product, or

else the vessel borne navigation equipment would fail to work for differences in circuit

design, or its performances would be affected, and the machine would be even

damaged. The voltage of this machine must be AC 220V, and must not go beyond

this range.

3. Please don’t dismantle the vessel borne navigation equipment, or else you will be

unable to enjoy the free warranty services if the vessel borne navigation equipment is

dismantled by yourself instead of a maintenance engineer authorized by our

company.

4. In operating or cleaning the vessel borne navigation equipment, avoid any liquid or

other objects falling off inside the equipment, in order not to cause damages to circuit

or a short circuit.

5. Please don’t place the vessel borne navigation equipment and its accessories in

damp areas or have them directly exposed to sun. The machines shall be operated

under dry conditions.

6. The power supply shall be reliably grounded to avoid static electricity and lightning

strike. If the instrument is not used for the time being, please switch the power supply

off.

7. When the vessel borne navigation equipment fails to position for a long while, please

check if the antenna is properly installed, poorly connected, sheltered or disturbed by

other things around it. GPS antenna is active, so please make sure its cable joints are

intact without short or open circuits before starting the vessel borne navigation

equipment. Then, install the antenna correctly. When the equipment is under

operation, the antenna shall not be pulled out at will, to protect the equipment from

damage.

8. In case of over high external temperature, the vessel borne navigation equipment

would crash. In this case, please shut down it for the time being, and restart it when it

is restored to the normal temperature.

9. When LCD (Liquid Crystal Display) is used, it shall not be directly exposed to the

sunshine, and its angle of elevation may be adjusted anytime for optimal visual

effects.

10. In case of any hardware failure (e.g. burnt out power cord, damaged casing or foreign

bodies falling inside the machine), please power the machine off and contact the

distributor immediately.

11. Our company shall not be liable for any legal and other responsibilities arising from

any marine accidents, financial or profit losses of vessel s equipped with out vessel

borne navigation equipment.

ECDIS User Manual

Content

User Instructions:...........................................................................................................1

Notes: ..............................................................................................................................2

Content............................................................................................................................3

Chapter 1.........................................................................................................................6

1.1 Product Descriptions ........................................................................................ 7

1.1.1 Hardware Components ........................................................................ 7

1.1.2 Host Interfaces ..................................................................................... 7

Chapter 2.......................................................................................................................10

2.1 Home Screen.................................................................................................. 11

2.1.1 Description of Operational Interface................................................... 11

2.1.2 Quick Operation Menu ....................................................................... 13

2.2 Route design .................................................................................................. 18

2.2.1 New route........................................................................................... 18

2.2.2 Editing waypoints ............................................................................... 18

2.2.3 Deleting waypoints ............................................................................. 19

2.2.4 Locking the route................................................................................ 19

2.2.5 Deleting a route.................................................................................. 19

2.2.6 Display Settings ................................................................................. 20

2.2.7 Route detection .................................................................................. 20

2.2.8 Loading the route ............................................................................... 21

2.2.9 Save the route.................................................................................... 21

2.2.10 List of waypoints............................................................................... 22

2.2.11 Voyage schedule .............................................................................. 23

2.2.12 Route Export/Import ......................................................................... 25

2.2.13 Interaction Log ................................................................................. 25

2.2.14 Settings ............................................................................................ 26

2.3 Route monitoring ............................................................................................ 27

2.4 Electronic chart management ......................................................................... 28

2.4.1 Chart unit ........................................................................................... 29

2.4.2 Unit License ....................................................................................... 29

2.4.3 Update log.......................................................................................... 30

2.4.5 Data Service Provider ........................................................................ 30

2.5 Manual update................................................................................................ 30

2.5.1 New object ......................................................................................... 31

2.5.2 Deleting objects.................................................................................. 31

ECDIS User Manual

2.5.3 Moving objects ................................................................................... 32

2.5.4 Correcting the object .......................................................................... 33

2.5.5 Manually updates ............................................................................... 33

2.6 Mariners’ feature............................................................................................. 33

2.7 Mariners’ Note ................................................................................................ 35

2.8 Navigation record ........................................................................................... 35

2.9 AIS Information ............................................................................................... 36

2.9.1 AIS List ............................................................................................ 37

2.9.2 Messages........................................................................................... 37

2.9.3 AIS Settings ....................................................................................... 37

2.9.4 AIS navigation parameter settings...................................................... 38

2.10 Radar target.................................................................................................. 38

2.11 ECDIS chart 1............................................................................................... 39

2.12 Settings......................................................................................................... 39

2.12.1 OwnShip setting ............................................................................... 39

2.12.2 System Settings ............................................................................... 41

2.12.3 Chart setting..................................................................................... 43

2.12.4 Sensor Settings................................................................................ 48

2.12.5 Alarm Settings .................................................................................. 49

2.12.6 Network Settings .............................................................................. 51

2. 13 Alarm ........................................................................................................... 51

2.13.1 Overview .......................................................................................... 51

2.13.2 Alarm prompts and responses.......................................................... 52

2.13.3 Alarm Record ................................................................................... 52

2. 14 LOP positioning ........................................................................................... 53

2.14.1 Overview .......................................................................................... 53

2.14.2 How to use ....................................................................................... 54

2.15 Distance and position calculation ................................................................. 56

2.15.1 Distance calculation ......................................................................... 56

2.15.2 Position calculation .......................................................................... 56

2.16 Standard Legend .......................................................................................... 56

Chapter 3.......................................................................................................................58

3.1 Summary............................................................................................... 59

3.2 View Chart Information ................................................................................... 59

3.3 Chart Sequencing........................................................................................... 59

3.4 IHO S-63 Data Protection Solution ................................................................. 59

ECDIS User Manual

3.5 SA Certificate.................................................................................................. 59

3. 5.1 Installation of SA Certificate .............................................................. 60

3.5.2 Uninstall SA Certificate....................................................................... 61

3.6 User permit ..................................................................................................... 61

3.6.1 Generate User Permit ........................................................................ 62

3.7 Data Service Providers ................................................................................... 62

3.8 Cell permit ...................................................................................................... 62

3.8.1 Install Cell Permit ............................................................................... 63

3.8.2 Uninstall Cell Permit........................................................................... 64

3.9 Electronic Chart Cells ..................................................................................... 64

3.9.1 Install Exchange Set .......................................................................... 65

3.9.2 Install Map (S-57 Electronic Chart) .................................................... 68

3.9.3 Uninstall electronic chart .................................................................... 68

3.9.4 Update log.......................................................................................... 69

Chapter 4.......................................................................................................................70

4.1 Equipment maintenance ................................................................................. 71

4.2 Operation Manual for HM-5818 Update Disk.................................................. 72

4.2.1 Select boot device (If the default boot device is USB flash disk，you can

skip this step) .............................................................................................. 72

4.2.2 Function Options ................................................................................ 73

4.2.3 Update application ............................................................................. 73

4.3 Operation manual for HM-5818 system rescue .............................................. 74

4.3.1 Select boot device.............................................................................. 74

4.3.2 Function Options ................................................................................ 75

4.3.3 General Recovery .............................................................................. 76

4.3.4 Advanced Options .............................................................................. 77

Annex I: Mounting Dimensions of Host ....................................................... 78

Mounting Dimensions of Display(19inch): ................................................... 78

Mounting Dimensions of Display(24inch): ................................................... 79

Annex 2: ............................................................................................................... 80

Specifications and Standards...................................................................... 80

ECDIS User Manual

Chapter 1

Overview

In this chapter, an introduction is made to product appearances, accessories

and keyboards.

ECDIS User Manual

1.1 Product Descriptions

HM-5818(19´24´) Electronic Chart Display and Information System (ECDIS) is controlled

by the host and composed according to structures of displays with different size, to make

it convenient to install the system and meet the needs for different display size. Its

software system is operated on an open platform known as Linux, designed with

functional modules. Being stable and convenient for operation, it has a simple and clear

human machine interface that can meet users’ requirements.

1.1.1 Hardware Components

1.1.2 Host Interfaces

Model 1 :

ECDIS User Manual

Model 2:

Table of contents

Other Xinuo GPS manuals

Xinuo

Xinuo XF-1069GF User manual

Popular GPS manuals by other brands

Raven

Raven Cruizer II Manual

Hama

Hama 53118 Operating instruction

Garmin

Garmin SOUNDER 125 Owner's manual & reference

Garmin

Garmin DEZL 580 owner's manual

Jigabot

Jigabot EX quick start guide

Pointer

Pointer Cellocator CelloTrack XT LTE overview

Queclink

Queclink GV55LITE user manual

Voxson

Voxson Voxtrack GPS500 Quick user guide

Garmin

Garmin ECHOMAP PLUS owner's manual

Starcom Systems

Starcom Systems Kylos Compact user guide

Garmin

Garmin 15 H Series Technical specifications

Cobra

Cobra Marine MC 600Ci owner's manual

Cellocator

Cellocator CelloTrack T installation guide

Enfora

Enfora Mini-MT GSM2228UG001 user guide

Magellan

Magellan eXplorist 100 Reference manual

LTE

LTE G50B user manual

Garmin

Garmin DEZL OTR500 owner's manual

SkyGolf

SkyGolf SkyCaddie SG1 user guide