Xiaomi RMMNT30HFCW User manual
Curved Gaming Monitor 30'' User Manual . 1
Руководство пользователя Изогнутого игрового монитора
Xiaomi Curved Gaming Monitor 30" . 14
Manual de usuario de Xiaomi Curved Gaming Monitor 30" . 27
Вигнутий ігровий монітор Xiaomi Curved Gaming Monitor 30"
Посібник користувача . 40
Manuale utente Xiaomi Curved Gaming Monitor 30" . 53
Manuel d'utilisation de Xiaomi Curved Gaming Monitor 30" . 66
Xiaomi gebogener Gaming-Monitor 30 Zolln Benutzerhandbuch . 79
Xiaomi Kavisli Oyun Monitörü 30" Kullanım Kılavuzu . 92
Zakrzywiony monitor do gier Xiaomi 30'' Instrukcja obsługi .105
Xiaomi Curved Gaming Monitor 30" Gebruikershandleiding .118
Panduan Pengguna Xiaomi Curved Gaming Monitor 30" . 131
Contents
Product Overview
Monitor Overview
Package Contents
How to Install
Installing the Base
Cable Management
Wall Mount Installation
Instructions
Connections
Indicator Status
Menu Description
Precautions
Troubleshooting
Specifications
2
2
2
3
3
4
5
6
6
7
7
7
8
10
11
12
13
Regulatory Compliance Information
Power Adapter DP Cable
Monitor
Stand
Base
Studs × 4
8BSSBOUZ/PUJDF
Power Button & Indicator
Function Button
DisplayPort (DP) cable
User Manual
Quick Release
Caution: To reduce the risk of the monitor from
accidentally falling down, please make sure the
stand is firmly installed in place.
4. Install the stand onto the mounting point until
it clicks into place. Try to shake the stand to
make sure it is securely installed.
Note: Press the quick release button to remove
the stand.
Do not remove the
monitor from the
protective foam during assembly.
1. Unpack the box, then remove the monitor
with its protective foam together from the box
and place them on a flat stable surface.
2. Install the stand onto the base and fasten it
with the thumb screw from the bottom of the
base.
How to Install
Remove the cable-management cover, then pass the power cord and the cable through the opening in the
stand to connect them to the monitor. Install the cable-management cover back onto the monitor.
Cable Management
5. Use both hands to carefully take out the fully assembled monitor and place it on a flat stable surface.
CAUTION: To avoid damaging the screen, be careful not to press on the LCD screen when standing
it up.
Do not press the screen.
Cable-management Cover
3. Refer to the instructions of the wall mount to mount the monitor. Do not press on the screen during the
mounting process so as to avoid damaging the screen.
Wall Mount Installation
1. Press the quick release button to remove the stand.
CAUTION: To reduce the risk of falling down, please properly install the wall mount and take safety
protection on the monitor to avoid any injury or damage. Do not place anything on top of the wall
mount or hang anything from it. The recommended height of the wall mount shall not exceed two
meters.
Wall
Wall
Wall Mount
(sold separately)
Monitor Arm Wall Mount
(sold separately)
2. Insert the four studs into the back of the monitor in the positions indicated, then refer to the
instructions of the wall mount (sold separately) to install it to the studs.
Note: The compatible wall mount must have the VESA pattern mounting holes of 75 × 75 mm apart from
each other vertically and horizontally.
Quick Release Button
%1$BCMF
)%.*$BCMF
DC IN HDMI 1 HDMI 2 DP
(HDMI 1.4) (HDMI 2.1) (DP1.2)
Connecting the DP cable. The DP cable is only used for transferring data or signals via the DP port.
a. Make sure the monitor and the computer are both turned off.
b. Connect one end of the DP cable to the computer's DP port, and the other end to the monitor's DP port.
Note: The maximum resolution of the DP port (DP 1.2) is 2560 × 1080, and the maximum refresh rate is 200 Hz.
Connecting the HDMI cable. The HDMI cable is only used for transferring data or signals via the HDMI port.
It is sold separately.
a. Make sure the monitor and the computer are both turned off.
b. Connect one end of the HDMI cable to the computer's HDMI port, and the other end to the monitor's
HDMI port.
Note: Due to the detailed classification of the HDMI certification standard, HDMI 2.1 is divided into TMDS
protocol (its bandwidth is equivalent to HDMI 2.0's) and FRL protocol. The monitor's HDMI 2.1 port
supports the TMDS protocol. The maximum resolution of the HDMI 2.1 port is 2560 x 1080, and the
maximum refresh rate is 180 Hz. The maximum resolution of the HDMI 1.4 port is 2560 × 1080, and
the maximum refresh rate is 75 Hz. The FreeSync Premium function cannot be enabled when this
port is used.
Plug both the power cords of the computer and the monitor into a power outlet.
Earphone
DC Power Cord
Connect a headset or any 3.5 mm compatible external audio device to the monitor's audio output port.
Note: The audio port is only for transmitting the audio data
Note: If the power adapter cord or DP cable is damaged, it must be replaced with a genuine
one purchased from the manufacturer or after-sales service department
Press Turn On/Off
On
In sleep mode
On
Dimmed Off
Breath
Indicator Status
1
2
Down/Right
Exit/Go back
//
3
4
Operation
Result
When menu is not
displayed on the monitor
When shortcut menu is
displayed on the monitor
When main menu is
displayed on the monitor
Press
Press
Press
Press
Open shorcut menu
Open shorcut menu
Open shorcut menu
Open shorcut menu
Open main menu OK
Press and hold
for 5 seconds Disable menu
Shortcut key 1
Shortcut key 2
Close shorcut menu
Note: Once the menu is disabled, the monitor is no longer responds to user actions. A message will pop up
to inform you that the on-screen display (OSD) has been locked up. Press and hold any button for 5
seconds to enable the menu and unlock the OSD.
Menu Description
Shortcut Key Description
Main menu Shortcut
key 1
Shortcut
key 2
Exit
Main Menu Icon and Description
4UBOEBSENPEF
Bri/Con
Display
PQ
Game realated
Smart modes
Brightness
Contrast
DCR
Black level
0–100 60
75
Display
Color
temperature
Standard/Warm/Cool/
Custom
Hue
Saturation
Gamma
Adjust the monitor's sharpness
Aspect ratio
PQ Response time
Sharpness
0–100
Off
500–100
0–100
0–100 50
50
1.8/2.0/2.2/2.4/2.6 2.2
Full/1:1/Auto
Ultrafast/Superfast/
Fast/Normal Normal
0–100 50
Adjust the monitor's response time
Game
realated
FreeSync Premium On/Off Off
On/Off Off
Enable or disable FreeSync
Premium function
To reduce high brush picture ghosting
Displays the aiming sight
Refresh rate
IMBC
Aiming sight
On/Off Off
Off/Style 1–Style 6 Off
Displays the current refresh rate
Standard
Full
Main menu Submenu Description Option Default
Bri/Con
Brightness
Contrast
DCR
Black level
Adjust the monitor's brightness
Adjust the monitor's contrast
Adjust the monitor's dynamic
contrast
Adjust the monitor's black level
On/Off
Adjust the monitor's color
temperature
Adjust the monitor's hue
Adjust the monitor's saturation
Adjust the monitor's gamma
Adjust the monitor's aspect ratio
When the menu is not displayed, press any function
button to enter the shortcut menu.
Press the corresponding function button below each item of
the shortcut menu to enter the corresponding option.
You can set the shortcut function via Main menu > Seings >
Shortcut key > Shortcut key 1 / Shortcut key 2. By default,
the shortcut Key 1 is Input source settings and the shortcut
Key 2 is Smart mode settings.
(FPS/RPG/RTS/MOBA/SPT)
/
/
/
/
Bottom
left
Medium
/
Volume
Information
Reset
English
//
///
Adjust the monitor's volume
Model number
Current resolution
Input source
HDMI Logo
Low blue light content
0–100 50
10 s5 s/10 s/15 s/20 sOn-screen display (OSD) time
Main Menu Submenu Description Option Default
Smart
modes
Standard
ECO
Game
Movie
Low blue light
Set to standard mode
Set to eco mode
Set to game mode
Set to movie mode
Set to low blue light mode
Only one mode can be
selected at a time Standard
Language
PBP
Single window Only display the main window Input source
Win 1 input
Win 2 input
Win 1 input
Win 2 input
Win 2 size
Win 2 position
PIP
Select the menu language
Picture-by-Picture. Display two
video inputs side by side
Picture-in-Picture. Display the
main window and a subwindow
Shortcut
key
Shortcut
key 1
Shortcut
key 2
Set function for shortcut key 1
Set function for shortcut key 2
Input
Smart
modes
FreeSync Premium/Brightness/
Contrast/Color temperature/
Smart modes/Input/Volume
FreeSync Premium/Brightness/
Contrast/Color temperature/
Smart modes/Input/Volume
Setting
Window
setting
English/Español/РУССКИЙ/Francais/Italiano/
Deutsch/Polski/ /Français canadien/
Español de Latinoamérica/繁體中文 (香港)/
繁體中文 (台灣)/日本語/한국어
ﻲﺑﺮﻋ
This manual suits for next models
1
Table of contents
Languages:
Other Xiaomi Monitor manuals
