Xiaomi Mi Smart Home Kit User manual
Thank you for choosing Mi Smart Home Kit
Connecting the new device
Quick Setup
Sharing Device Meet your devices
Mi Smart Home Kit - is a multifunctional gateway with a
presence of motion sensor, for windows / doors and the
main hub. This set of devices is very easy to install and
they are quite easy to manage.
Via Mi Smart Home Kit, you can use these functions: a
night light, smart notications, wireless doorbell, and also
these can be variously combined with other smart devices.
* This device is intended for indoor use only
* the whole set of Mi Smart Home Kit, on release from the
factory, is by default connected to the gateway, so after
installation of the device, you can immediately use it.
motion detector sensor
multifunctional gateway
the main hub
sensor for windows/doors
Download an application
In Mi store nd «Mi Smart House» or scan
the QR-code.
First, connect the multifunctional gateway to the power
supply and at the same time, make sure you connect your
smartphone to a WiFi network. Open the Mi Smart home
App and choose a fast connection of new devices or in the
upper right corner, click +, and add to the list of devices Mi
Smart Home Kit.
* The best place
to connect the
multifunctional gateway:
away from the wireless
router, with the best
distance of 2 meters.
In order to use the device
simultaneously with other users,
on the main page of Mi Smart
Home Kit press button “options”
and you will be able to connect to
the other members of the family
Mi Smart Home Kit.
Mi multifunctional gateway
The Mi multifunction gateway has a built-in Smart Module
- this is the control center of Mi Smart Home Kit. Due to
the multifunction gateway, each sensor can be connected
to other Smart devices.
* safe use of the device in
areas that are below 2000
meters above sea level
One click: On / O
Double-click : home security (on / o)
Three clicks: adding devices
LED lighting
Speaker
XIAOMI-MI.COM
Motion Sensor
Induction lens
(status indicators)
reset (binding
device / delete)
In infrared motion sensor is used function to detect
movement of people or animals indoors. Low power
consumption, easy installation without tools, placement
anywhere.
Sensor for windows / doors
main
sensor
magnet
status
indicator
reset
Sensor for windows / doors consists of a main sensor and
the magnet, which are installed close to each other and xing
initial position of windows or doors. Low power consumption,
easy installation without tools, install and use immediately.
The main hub
LED Status Reset (binding
device / delete)
Hub Button
The main hub - a new type of remote control devices,
with low power consumption. Very compact, so it can
be placed anywhere, easy to install without tools.
Install and use immediately, you can easily control the
operation of lamps, sockets and smart devices.
Logging in the App
After a quick installation of the device in accordance with
the instructions, and after a successful connection to the
Smart Home Kit smartphone user, you can enjoy all the
advantages of this device:
1: Night Light
- Install motion sensor near the bed
- Using a smart phone, set the desired color
2: Notications
- Install sensor for window / door sensor or motion in the
desired area of the room
- In «Smart House» App select necessary functions
- One-click on «Safe Mode», activate the protection of your
home. In case of opening a window or door, or if someone
entered the house, the main hub immediately emit a
corresponding sound, and you’ll get a notication on your
smartphone.
3: Doorbell
- Set the main hub on non-metallic surface
- Click on the button of the main hub and multifunction
gateway will immediately beep doorbell
- The doorbell and its volume can be adjusted in the Smart
House App
4: Controlling other devices
- In Smart House App install house management
ongurations
- After a successful installation, with one click, you can
operate the hub device
- More fun is waiting for you
You need to know
1. Before using the Mi Smart Home Kit, you must be sure
you have carefully read the instructions.
2. Mi Smart Home Kit is designed to improve the conditions
of life in your home, and is not a security measure, since it
does not apply to products in China compulsory certication
(3C) the 19th paragraph, which refers to the product
categories for security.
3. Mi Smart Home Kit is designed to inform about the status
of devices, and not for a special home security, buildings,
warehouses or any business premises. If the user violates
the rules of use of the goods using our device as a special
security facilities, the company bears no responsibility.
XIAOMI-MI.COM
Installation
Distance for the eective operation of the device: select a
suitable site for the installation of the sensor, it is necessary
to reset the factory settings using a special needle. After this
multi-function gateway will make a corresponding sound,
which signals that you chose the optimal distance between
the sensor and a multi-function gateway.
Motion Sensor
Method 1: You do not have to stick with the back of the
sensor to the wall or other surface, you can simply install it
in the right place.
Method 2: Remove the protective cover (in kit of your device
you get adhesive membrane) and you can stick the sensor
to the back of any surface or wall.
* Optimal height at which the sensor should be, 1.2-2.1m.
At a height of less than 1.2 m, the detection range becomes
smaller, but it does not aect its use. When you place the
sensor more than 2.1m, in the room will appear blind spots,
so there can be problems with nding people, animals.
* During installation, pay special attention to induction lens.
It should be directed to the side of space that you want to
monitor. Install or stick the sensor maximum close to the
edge of a table or cabinet.
1 Stick to any desired surface
Remove the protective
membrane
Optimal detection range / Optimal detection radius
Sensor for windows / doors
1 Remove the protective membrane
During installation, try
as much as possible to
balance the location of
the primary sensor and
the magnet at a special
mark (see Figure 2)
Attach the device to the desired
surface (recommended to
install the primary sensor on the
immovable surface, and a magnet
on the surface, which is expected
to be opened. The allowable
distance between the main
sensor and magnet 22mm.
The main hub
1 Remove the protective membrane
2 Attach the unit to the desired
surface
* Glue unit on a dry surface
* Place the hub on the main non-metallic surface, since it
aects its work
New devices
To add a new device or restore the factory settings, you
can use one of the two following methods:
Method 1: Open the smart home and on the main page
of the multifunction gateway click on «add device» by
following the instructions set out below, do a factory reset.
Method 2: Continuously press three times on button of a
multifuntion gateway, follow the instructions set out below,
do a factory reset.
* When you connect smart devices without a hole for reset,
read the instructions for use of such a device
* When connecting the device to another gateway, you
need to reset the device, and then add a new device by
following the above described scheme.
XIAOMI-MI.COM
Reset
Press on the hole with a special needle and hold it for 3
seconds, then the device status indicator blinks three times,
signaling the successful resetting.
Movement sensor
Sensor for windows / doors
The main hub
Warranty
Warranty service is carried out in accordance with the law on
«the rights of consumers of China» and «Law of the PRC on
the quality of products.» The warranty service includes:
During the warranty period you have the right to repair,
exchange or return an item. For repair, replacement or return
of goods you need to present a receipt.
Type of Service Terms of Service
Baseless returns
1. baseless return only in the ocial shops and only within 7
days after the purchase (after signing a guarantee of 7 days)
2. Return of goods is only possible with its package
Refund of purchase (product quality)
1. In the event of a problem, you can return within 7 days
after the signing of the guarantee 2. Return of goods is only
possible with its package
Purchase Exchange (product quality)
in case of a problem, goods can be replaced within 15 days
after the signing of the guarantee
Warranty repair of purchase (product quality)
In the event of problems, possible free warranty repair of the
goods within 1 year after the signing of the guarantee
xiaomi-mi.com
The list of circumstances (including, but not limited to), under
which compensation is not possible:
- The end of maintenance period, fall, neglect, abuse, liquid
ingress, accident, broken or slipped the label and marking
device;
- The warranty period is ended;
- Damage caused by force majeure, such as lightning, re or
ood.
- Damage that does not meet "fault list" service center
Xiaomi;
- Failure of the "fault list", which arose in connection with the
human factor, and which interfere with the normal operation
of the device.
List of faults
Multifunctional Gateway
1. Gateway cracks due to construction or material device
2. Malfunction nightlight
3. If you have problems with notications 4. Problems with
the connection to the network Wi
The motion sensor
1. The occurrence of cracks due to construction or material
device
2. Malfunction Indicator
3. If you have problems with resetting
4. Problems with tracking feature
Sensor for windows / doors
1. Appearance of cracks due to construction or material
device
2. Malfunction Indicator
3. If you have problems with resetting
4. If you have problems with the function of monitoring the
status of the windows / doors (except in cases where the
distance between the sensor and magnet too large)
The main hub
1. The occurrence of cracks due to construction or material
device
2. Malfunction Indicator
3. If you have problems with resetting
4. If you have problems with the on / o button
The presence of
toxic and hazardous
substances
There are no any of elements of Pb,Hg,Cd,Cr6+, P, BB,
PBDE in product or its presence is lower than the limit value
according to SJ / T11363-2006
requirements.
XIAOMI-MI.COM
Other manuals for Mi Smart Home Kit
1
Other Xiaomi Gateway manuals
Popular Gateway manuals by other brands
LST
LST M500RFE-AS Specification sheet
Kinnex
Kinnex Media Gateway quick start guide
2N Telekomunikace
2N Telekomunikace 2N StarGate user manual
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Original instructions
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE user guide
Telsey
Telsey CPVA 500 - SIP Technical manual
