Xerox 4004 User manual

This manual suits for next models

4

Table of contents

Other Xerox Printer Accessories manuals

Xerox

Xerox Phaser 6360 Manual

Xerox

Xerox HP Toner Cartridges 6R941 User manual

Xerox

Xerox 5500DN - Phaser B/W Laser Printer User manual

Xerox

Xerox 4510B - Phaser B/W Laser Printer User manual

Xerox

Xerox 6130N - Phaser Color Laser Printer User manual

Xerox

Xerox Phaser 6128 MFP Manual

Xerox

Xerox Phaser 6180MFP User manual

Xerox

Xerox 3600B - Phaser B/W Laser Printer User manual

Xerox

Xerox Phaser 6180MFP User manual

Xerox

Xerox ECP- Magenta Toner Premix/Concentrate for ECP... Operating and maintenance instructions

Xerox

Xerox WorkCentre Pro 123 User manual

Xerox

Xerox Phaser 6180MFP Manual

Xerox

Xerox PostScript Kit User manual

Xerox

Xerox Phaser 6180MFP User manual

Xerox

Xerox Synergix 8830 User manual

Xerox

Xerox Bypass Tray Feed Roller Kit User manual

Xerox

Xerox C11 - DocuPrint Color Inkjet Printer User manual

Xerox

Xerox Digital copier printers User manual

Xerox

Xerox 5500DN - Phaser B/W Laser Printer User manual

Xerox

Xerox Phaser 6180MFP User manual

Xerox

Xerox EFI EXP6000 User manual

Xerox

Xerox Creo CXP6000 User manual

Xerox

Xerox 5500DN - Phaser B/W Laser Printer User manual

Xerox

Xerox WorkCentre Pro 123 User manual

Popular Printer Accessories manuals by other brands

Star Micronics

Star Micronics TSP800 Series install guide

REA

REA JET HR pro 2K user manual

HP

HP Laserjet,Color Laserjet 4si user guide

oliser

oliser MS 45 instructions

Roland

Roland DU2-64 Supplementary manual

Canon

Canon Finisher-T1 Service manual

Sharp

Sharp FO-1MK Service manual

Labelmate

Labelmate PM-300 user manual

Epson

Epson T6248 Product information sheet

Epson

Epson OT-BZ20 user manual

Canon

Canon TonerRobot EP-27 instruction manual

Ricoh

Ricoh LCIT RT5100 Field service manual

GBC

GBC 16 Series user guide

Canon

Canon INNER 2-WAY TRAY-E1 INSTALLATION PROCEDURE

Develop

Develop SD-509 installation manual

Kyocera

Kyocera KM-6230 Instruction handbook

Triumph Adler

Triumph Adler DF-710 Instruction handbook

Citizen

Citizen CBM-202PC Series user manual

Step-by-Step Instructions

(PRINT this set of instructions to follow every time you refill your cartridge)

Xerox 8R7638/ 8R7659/ 4004 Cartridges

Xerox Xj4C/ Document Work Centre 450C/ 4004/ Home

Work Centre Printers/Texas Instruments Micromarc Printers

Items needed: gloves, #2 refill station, hand-drill, Flat aluminum plugs, dye-based

black ink, paper towels, review hints & tips and check list

Bottle Seal: Unscrew lid on ink bottle. Puncture silver seal with needle top

making a small hole in the center of seal. Tightly screw on dispensing tip. Rinse

dispenser tip before using dispenser tip with another color. Rinse tip with water

until the water runs clear. Pull plastic tip cover off of tip of syringe to pour ink.

1. Make a filling hole on the front of the cartridge 1/2" from the top using the thumb drill

provided.

2. Insert the Black Dye filling needle through the hole and push towards the center of the

cartridge. The cartridge contains felt. Stop inserting the syringe when the needle touches

the felt. The needle is in as far as it can go.

3. Slowly inject up to 20 ml. of ink or until ink appears at the filling hole.

4. Seal the filling hole with the aluminum tape provided.

5. Xerox_8R7638 Check the ink flow by gently pressing a dry paper towel against the

printhead. You should see a line or dot of Black ink. If not, gently press a warm, wet

paper towel against the printhead until the black is visible.

6.) When black is visible on paper towel, place cartridge back into the printer and run 1

to 2 print tests. Or print 2 pages at this test site

http://www.inkonline.net/support/blackinktest Black ink test

For best results, leave cartridge in printer for 8 hours after refilling so the ink can

saturate the entire sponge.

Note: Empty cartridges should be refilled immediately.

To Clean the Printhead

Clean the printhead only if the cartridge doesn't print or prints in streaks.

1. Follow the directions in the printer manual.

2. If that doesn't work, here's a quick and easy method to try next:

oTurn on the hot water faucet and let the water get good and hot.

oStick just the copper printhead under the hot water for 3 to 5 seconds.

oRemove the printhead and dry with a tissue.

oRe-insert in the printer and run the printhead cleaning routine.

oPrint 2 pages. You should get dilute print for a half page or so and then

good quality printing.

3. If this doesn't work, soak only the printhead in simmering water for up to 2 hours.

You may add up to 50 percent ammonia for tough clogs.